The radionuclide inventory in radioactive waste from nuclear power plants should be determined to secure the safety of final repositories. As an alternative to time-consuming, labor-intensive, and destructive radiochemical analysis, the indirect scaling factor (SF) method has been used to determine the concentrations of difficult-to-measure radionuclides. Despite its long history, the original SF methodology remains almost unchanged and now needs to be improved for advanced SF implementation. Intense public attention and interest have been strongly directed to the reliability of the procedures and data regarding repository safety since the first operation of the low- and intermediate-level radioactive waste disposal facility in Gyeongju, Korea. In this review, statistical methodologies for SF implementation are described and evaluated to achieve reasonable and advanced decision-making. The first part of this review begins with an overview of the current status of the scaling factor method and global experiences, including some specific statistical issues associated with SF implementation. In addition, this review aims to extend the applicability of SF to the characterization of large quantities of waste from the decommissioning of nuclear facilities.

An important property of glass and ceramic solid waste forms is processability. Tellurite materials with low melting temperatures and high halite solubilities have potential as solid waste forms. Crystalline TiTe3O8 was synthesized through a solid-state reaction between stoichiometric amounts of TiO2 and TeO2 powder. The resultant TiTe3O8 crystal had a three-dimensional (3D) structure consisting of TiO6 octahedra and asymmetric TeO4 seesaw moiety groups. The melting temperature of the TiTe3O8 powder was 820℃, and the constituent TeO2 began to evaporate selectively from TiTe3O8 above around 840℃. The leaching rate, as determined using the modified American Society of Testing and Materials static leach test method, of Ti in the TiTe3O8 crystal was less than the order of 10-4 g·m-2·d-1 at 90℃ for durations of 14 d over a pH range of 2-12. The chemical durability of the TiTe3O8 crystal, even under highly acidic and alkaline conditions, was comparable to that of other well-known Ti-based solid waste forms.

In the geochemical field, the chemical speciation of hexavalent uranium (U(VI)) has been widely investigated by performing measurements to determine its luminescence properties, namely the excitation, emission, and lifetime. Of these properties, the excitation has been relatively overlooked in most time-resolved laser fluorescence spectroscopy (TRLFS) studies. In this study, TRLFS and continuous-wave excitation–emission matrix spectroscopy are adopted to characterize the excitation properties of U(VI) surface species that interact with amorphous silica. The luminescence spectra of U(VI) measured from a silica suspension and silica sediment showed very similar spectral shapes with similar lifetime values. In contrast, the excitation spectra of U(VI) measured from these samples were significantly different. The results show that distinctive excitation maxima appeared at approximately 220 and 280 nm for the silica suspension and silica sediment, respectively.

용존 6가 우라늄은 다양한 화학종으로 존재하며, 화학종의 분포는 수용액의 pH에 의존한다. 산성 및 중성 근처의 pH 환경 에서는 대표적으로 UO2 2+, UO2OH+, (UO2)2(OH)2 2+, (UO2)3(OH)5 + 화학종이 공존한다. 수용액 속에 비결정성 실리카가 콜로이드 성질의 부유입자 상태로 존재할 때 용존 화학종은 실리카 표면에 쉽게 흡착된다. 이 연구에서는 표면 흡착 화학종의 분 포가 용존 화학종의 분포를 따르는지 조사하였다. 시료의 pH 값이 3.5-7.5인 조건에서 3종의 용존 화학종(UO2 2+, UO2OH+, (UO2)3(OH)5 +)과 2종의 표면 흡착 화학종(≡SiO2UO2, ≡SiO2(UO2)OH‐ 또는 ≡SiO2(UO2)3(OH)5 ‐)의 시간 분해 발광(luminescence) 스펙트럼을 측정하였다. pH 변화에 따른 각 화학종의 스펙트럼 변화 양상을 비교한 결과로 표면 흡착 U(VI) 화학종의 분포는 용존 U(VI) 화학종의 분포와 다르다는 것을 확인하였다.