In general, it is required mechanical properties and strength tests to use the material in engineering applications. The material fringe values of photoelastic materials vary with the supplier, the batch of resin, temperature and age, it is necessary to calibrate each of sheet of photoelastic material at the time of the test. In this paper, we perform tensile tests and calibrations tests for photoelastic stress fringe constant in order to obtain the mechanical properties of materials and photoelastic material fringe constants of PMMA and PSM-1. From this tests, the tensile strength of PMMA and PSM-1 were 100.5 MPa and 71.5 MPa, respectively. Also, the measured material stress fringe constants of PMMA and PSM-1 were 13.33 N/mm and 6.91 N/mm, respectively.

Many polymers exhibits sufficient birefringence to be used as photoelastic specimen material. Common polymers as polymethylmethacrylate (PMMA) are often used as photoelastic specimen. In a photoelastic experiment, it is necessary to know the material fringe constant of the photoelastic specimen to determine the stresses from the measured isochromatic fringe orders. The material stress fringe constant is determined using the simple tension specimen. The stress fringe constant measured with this method is applied to obtain the stress distribution in a tensile plate with a circular hole. Photoelastic results using the measured material fringe constant are compared with FEM analysis. Two results are comparable, so it can be seen for the measured material fringe constant to be valid.