The IMO’S 72nd MEPC meeting proposed the goal of reducing greenhouse gas emissions by up to 50% by 2050. Thus, various eco-friendly fuels are proposed as alternatives, but there are also various issues that need to be tackled, such as storage stability and supply system issues in a special environment a ship has. Therefore, in this study, the possibility of reducing greenhouse gases was analyzed by applying MGO as an alternative to boilers operated with HFO, a Bunker-C series. As a result, the exhaust gas temperature decreased by about 11.54% from 316.9℃ to 280.3℃, and the amount of oxygen content increased by about 0.38% from 6.27% to 6.65%. It can be seen that carbon monoxide can be reduced by about 45.28% by simply converting fuel from 45.29 ppm to 24.78 ppm, and carbon dioxide, which is a typical greenhouse gas, can be reduced by about 0.49% from HFO by 11.08% to MGO by 10.59%. This means that some greenhouse gas reduction is possible only by shifting between ship fuels that satisfy ISO-8217, but since there are limitations to achieving strong carbon neutrality proposed by IMO, it will be necessary to actively utilize the use of various alternative fuels in the future.

The fuel oil used for ships has the viscosity higher than the fuel used for general vehicles and contain impurities, so it’s exhaust gas results in the environment pollution. There have been studies actively conducted to examine alternative fuels for improving the quality of the marine fuel oil. It is, however, necessary to test the quality of fuel for mega ships, by conducting the simulation test using reduced-size models, before the demonstration step, because it takes too much cost and time to directly perform the demonstration of alternative fuels. This study, therefore, developed a 30-liter small-size boiler similar to the ship system and performed an initial fuel test by applying MGO to it. The findings show that the amount of nitrogen oxide to which 4% of the standard oxide level was applied was about 24.69ppm, when the oxide level was 10.02%, with the CO2 of 8.02%, the exhaust gas temperature of 291.15℃ and the combustion efficiency of about 74.53%, indicating that it will be necessary to conduct various studies through the ratio control in the future.