현재 도로포장 유지보수 과정으로부터 노화된 폐 아스팔트가 발생하며, 순환 아스팔트로서 재활용하기 위해 아스팔트 오일을 첨가제 등과 함께 혼합하여 노화된 아스팔트의 성상 회복 및 유동성을 개선하여 도로포 장 재료로 활용하고 있다. 또한 아스팔트 오일의 사용은 저온영역의 성능 개선에도 영향을 미쳐 개질아스팔트 제작에도 활용하고 있으며, 개질 아스팔트는 SBS(Styrene Butadiene Styrene), SBR(Styrene Butadiene Rubber)등 고무계열의 폴리머와 오일 등을 원 아스팔트에 혼합하여 아스팔트 바인더의 공용성을 향상시키는 기술로서 폴리머는 아스팔트의 고온 영역의 물성, 오일은 저온영역의 물성을 개선하는데 사용된다. 이 중 폴 리머에 관한 연구는 활발히 이루어지고 있는 반면 아스팔트에 사용하는 오일에 관한 연구는 상대적으로 연 구가 부족한 실정이다. 따라서 오일의 사용으로 인한 아스팔트의 물성 변화에 관한 실험적인 검토가 필요 하다고 판단된다.

PURPOSES: This study evaluated the effect of fog seal treatment utilizing an agricultural oil-based asphalt concrete sealant (ABCS) on the long-term performance of an asphalt pavement. METHODS: Fog seal treatment using ABCS was applied on 800 m of the pavement section in the test section with a total length of 2,400 m; the remaining pavement section was not considered for this treatment. A series of laboratory and field tests were conducted on both sections, including a Marshall stability test, penetration test, viscosity test, skid resistance test, and pavement surface macrotexture test. In addition, the pavement condition index (PCI) was determined 8 years after the ABCS application to evaluate the effect of the ABCS treatment on the pavement’s long-term performance. RESULTS : The ABCS-treated section exhibited a PCI of 75, whereas the non-treated section exhibited a value of 64. Furthermore, a MicroPAVERTM‚ pavement management system determined that the pavement deterioration rates (i.e., drops in PCI) were 3.6 and 5.1 per year for the ABCS-treated and non-treated sections, respectively. CONCLUSIONS : The results of the series of laboratory and field tests revealed that the ABCS treatment increased the pavement performance life by approximately 3.5 years.

The oil sands are loose sand or partially consolidated sandstone containing naturally occurring mixtures of sand, clay, and water, saturated with a dense and viscous from of bitumen. Natural bitumen deposits are found in large quantities in Alberta and Utah area. Nevertheless of its environmental issues, a large-scale commercial oil sands industry is expected to increase in coming decades.(1) The present paper focuses on physico-chemical analysis of two different types of bitumens. These bitumen samples were chosen based on: the original source (oil sand and crude petroleum), and mode of process. The aim of this study is to determine both the manufacturing effect on chemical species and the chemical organization as a function of the type of bitumen sample. In order to obtain information on bitumen chemistry, elemental analysis (C, H, N, S, and O), heavy metal (Ni, V) concentrations, IATROSCAN chromatography (thin layer chromatography-flame ionization detection), FTIR spectroscopy, and NMR spectroscopy (1H NMR,13C NMR)haveallbeenused.The characterization includes information about the major compound types (saturates, aromatics, resins and asphaltenes) which can be compared with similar data for other bitumens, more importantly, can be correlated with data from petroleum samples for which refining characteristics are known. Examination of oil sand asphalt showed that it differed significantly from representative petroleum residues, principally in their nonhydrocarbon content and aromatic compounds. When possible, properties and composition were related to recovery and refining processes. This information is important because of the effects that composition has on recovery and processing reactions.