The main object of this study was to investigate the collection characteristics of wet-type cyclone with wall cavity. The experiment was executed to analyze the characteristics of pressure drop and collection efficiency for the present system with the experimental parameters such as water spray, water spray type, inlet velocity etc. In results, for the present system of wet-type, the pressure drop represented 35 mmH2O, while in dry-type 33 mmH2O showing lower 6% at vin=21 m/s. In case of vin=21 m/s and water spray 200 mL/min, the collection efficiency of the present system became significantly higher as 96.8% comparing to that of the conventional wet-type scrubber. Additionally, for 200 mL/min, SO2 removal efficiencies decreased with the increment of inlet velocity representing 75.0, 62.5, 50.0%, at vin=6, 9, 12 m/s, respectively.

The cylindrical gear in power window motor assembly is important to doors of automobile. This study is performed for purpose of getting a manufacturing technique instead of large quantities import and small cavity mold production. This multi-cavity cylindrical gear is produced under five procedures. The first, mold design of massproduction, the second, making a CAE model for mass-production, the third, manufacturing of sample mold, the fourth, trying-out and measuring of 3 dimensional design, the fifth, acquisition of data analysis and mold modification. Among them, analysis of mass-production using CAE, design and manufacturing of multi-cavity are successfully performed. In the results, it is concluded that mold for one gate and six cavity based on hot-runner is suitable for making a cylindrical gear.