임상에서 사용하는 진단 검사 장치인 전산화 단층촬영기(CT)를 이용하여 Dicom 파일을 획득하였습니다. Dicom 파일과 3D 프로그램, 3D 프린터로 손가락 보조기(Finger brace)를 제작하였습니다. 손가락 보조기(Fin ger brace)는 인체를 대상으로 하기 때문에 형태의 정밀도가 매우 중요합니다. 3D Print는 정밀도가 우수하 고, 재료가 다양하고, 출력 시간이 짧은 이점이 있습니다. 임상에서는 알루미늄 보호대나 의료기 업체의 손 가락 보호대가 한정적입니다. 3D 프린터로 손가락 보조기(Finger brace)를 제작하면, 환자의 손가락 외상, 질병, 변형의 치료에 이용할 수 있는 정밀한 형태의 맞춤형 손가락 보조기(Finger brace)를 환자에게 적용할 수 있을 것이라고 기대합니다.

Ankle-foot orthosis with a pneumatic rubber actuator, which is intended for the assistance and the enhancement of ankle muscular activities was developed. In this study, the effectiveness of the system was investigated during plantarflexion motion of ankle joint. To find a effectiveness of the system, the subjects performed maximal voluntary isokinetic plantarflexion contraction on a Biodex-dynamometer. Plantarfexion torque of the ankle joint is assisted by subject’s soleus muscle that is generated when ankle joint do plantarflexion motion. We used the muscular stiffness signal of a soleus muscle for feedback control of ankle-foot orthosis as physiological signal. For measurement of this signal, we made the muscular stiffness force sensor. We compared a muscular stiffness force of a soleus muscle between with feedback control and without it and a maximal plantarflexion torque between not wearing a ankle-foot orthosis, without feedback control wearing it and with feedback control wearing it in each ten elderly adults. The experimental result showed that a muscular stiffness force of a soleus muscle with feedback control was reduced and plantarflexion torque of an ankle joint only wearing ankle-foot orthosis was reduced but a plantarflexion torque with feedback control was increased.The amount of a increasing with feedback control is more higher than the amount of a decreasing only wearing it. Therefore, we confirmed the effectiveness of the developed ankle-foot orthosis with feedback control.