Using a mixture of sewage sludge and woody waste, optimal conditions for the bio-briquette process of carbonization residue were evaluated by compressive strength and bulk density. For the bio-briquette process, the optimal conditions were determined to be a molding temperature of 110oC and a moisture content of 10%. As the lignin in the carbonization residue can be used as a natural binder because of its plasticizing property, the bio-briquette process uses this property. To increase the compressive strength to >3.50 MPa, binders such as polyvinyl alcohol (PVA), guar gum, and starch were mixed in the carbonization residue. At 3 wt.% of PVA, 3 wt.% of guar gum, and 5 wt.% of starch, the conditions of binder usage were evaluated. To examine the cost in the bio-briquette production with the addition of the binder, the proportion of binder cost for the bio-briquette production were evaluated at 9.2% for PVA, 8.6% for guar gum, and 3.3% for starch, and starch was determined to be the best binder for the bio-briquette process.

According to the quality standards of the BIO-SRF(Bio-Solid Fuel Products) in Act on the Promotion of Saving and Recycling of Resources enforcement regulations, chloride is regulated to less than 0.5wt.%. The reason why chloride was regulated may generate HCl and dioxin when bio-solid fuel was burnt. Chloride and chloride compounds can be presented the characteristic of corrosiveness. These materials is reacted with iron to produce ferric chloride. Ferric chloride is oxidized to ferric oxide and ferric oxide can cause a pipe corrosion to short boiler life in combustion facility. There are several reactions to reduce Cl concentration in organic wastes and some wastes can be used in nucleophile reaction as reductive agents. Nucleophile(Nu) material can be represented by phosphate, nitrate, sulfate etc. Nu materials can substitute them for chlorine-based compounds(X-: Cl-, Br-, I-). Nu materials can reduce the harmfulness and chlorine concentration by substituting them for chlorine-based compounds of the solid fuel product produced by carbonization. In order to produce solid fuel product from organic wastes, carbonization among pyrolysis processes is suitable because nucleophile reaction should be an endothermic reaction, which heat must be entered to solid fuel product from outside. In this study, sewage sludge is used as a reductive agent to evaluate the characteristics of the reduction reaction in carbonization process because a large amount of Nu material is contained in sewage sludge. In order to evaluate the effect of Nu materials to control chloride in the residue of carbonization, waste wood mixed with sewage sludge was used in carbonization process.

In order to prevent the spreading infectious disease in domestic animal, livestock excretion should be controlled bysterilization. The basic concept of sterilization can be described by thermal treatment under vacuum state. From the basicconcept of sterilization, livestock excretion can be converted to produce renewable energy using the method ofcarbonization and the method of carbonization can also be reduced greenhouse gas effectively. Chicken manure is usedas a sample of renewable energy source in the carbonization reactor. The basic energy characteristics of chicken manuresuch as proximate analysis, and heating value are estimated. The carbonization residue of chicken manure which isobtained from carbonization experiment is subject to several analyses in order to examine the energy characteristics suchas heating value, fuel ratio, combustible index and yield. As increased carbonization temperature, both heating value andfuel ratio (fixed carbon/volatile combustible) of the residue are increased up to 350oC but yield of the residue is decreased.From the results of bulk density, fuel ratio and total heating value of the residue, the optimal conditions of carbonizationtemperature and time can be decided by about 350oC and 15min. Since the residue of chicken manure can not be satisfiedwith the standard of the third grade of solid fuel product, it is desirable that chicken manure be modified with othermaterials to improve an energy potential and to use as a clean fuel.