The high value-added utilization of traditional coal resources is one of the important ways to achieve the strategic goals of carbon peaking and carbon neutrality. Simultaneously, coal-based carbon materials, noted for their cost-effectiveness, superior conductivity, and inherent stability, are emerging as promising candidates for next-generation capacitor technologies. This research presents a series of coal-derived porous carbon by pyrolysis using low rank lignite as raw material and KOH as activator, which are employed in symmetrical supercapacitors filled with liquid electrolytes. The physicochemical properties of the as-prepared electrode materials are characterized by means of scanning electron microscopy, X-ray diffraction, Raman spectroscopy, and their supercapacitive performance are evaluated through cyclic voltammetry and galvanostatic charge–discharge tests. The coal-based porous carbon electrode prepared at an activation temperature of 800 °C (KOH-800) exhibits a specific capacitance of 142.2 F g− 1 at a current density of 1 A g− 1, and retaining 80% of its capacitance (114.0 F g− 1) even at 10 A g− 1. The fabricated liquid supercapacitor displays a power density of 999.8 W kg− 1 and an energy density of 19.4 Wh kg− 1 at a current density of 1 A g− 1. Undergoing 10,000 cycles at 2 A g− 1, the supercapacitor maintains nearperfect capacitance retention and coulombic efficiency close to 100%, demonstrating its excellent durability and stability for supercapacitor applications.

The aim of this work was to evaluate the dielectric properties of impregnated and activated palm kernel shells (PKSs) samples using two activating agents, potassium carbonate (K2CO3) and sodium hydroxide (NaOH), at three impregnation ratios. The materials were characterized by moisture content, carbon content, ash content, thermal profile and functional groups. The dielectric properties were examined using an open-ended coaxial probe method at various microwave frequencies (1–6 GHz) and temperatures (25, 35, and 45°C). The results show that the dielectric properties varied with frequency, temperature, moisture content, carbon content and mass ratio of the ionic solids. PKSK1.75 (PKS impregnated with K2CO3 at a mass ratio of 1.75) and PKSN1.5 (PKS impregnated with NaOH at a mass ratio of 1.5) exhibited a high loss tangent (tan δ) indicating the effectiveness of these materials to be heated by microwaves. K2CO3 and NaOH can act as a microwave absorber to enhance the efficiency of microwave heating for low loss PKSs. Materials with a high moisture content exhibit a high loss tangent but low penetration depth. The interplay of multiple operating frequencies is suggested to promote better microwave heating by considering the changes in the materials characteristics.