Green synthesis of graphene using leaf extracts as sustainable reducing and capping agents is a thrust area of research owing to its simplicity, eco-friendly nature and the ease of access to graphene. Moringa (Moringa oleifera Lam) plant is widely cultivated in India owing to its important medicinal and nutritional values. Inspired by these reports, herein we report a simple, green and economic synthesis of graphene, Moringa leaf extract employed reduced graphene oxide (MRGO) with excellent dye removal efficiencies. The MRGO is prepared by refluxing a mixture of aqueous dispersion of graphene oxide and Moringa leaf extract for 10 h. Further, we elucidated the role of synthesized MRGO in the removal of methylene blue (MB) and rhodamine B (RB) dyes through the sonochemical method. This as-synthesized material exhibited excellent dye removal efficiencies of about 93% and 87% against MB and RB dyes, respectively. Graphene with huge surface area expedited the better adsorption of dye molecules, thus, facilitated the better removal of the latter. Therefore, the superior dye removal efficiencies of MRGO were attributed to its adsorption capacity. This cost-effective synthetic approach of MRGO nanomaterial has a great potential for the innovative applications in water purification technology and find its place in further industrialization.
Unit cost for asbestos removal work which have been made out at government contract award for recent three years has been reviewed and shown with table. And the cost have been compared with ones made out by two agencies, American asbestos removal specialists, government ministry for making out comparison tables. First, legal and practical work status survey have been made to determine reasonability of introducing separate contract-awarding system, as a part of ensuring reasonable unit work cost. And then, two different status have been compared and there in introduction possibility of separate contract-awarding system, it is found out. In interior removal work case, it is thought that 50% by owner, 60% unit work cost by the expert of which removal specialist think as reasonable unit cost. the results for exterior and spray work method are shown with almost same context. Impact factors for determining unit work cost such as project mount, project kind, contract-awarding method, subcontract method have been compared with parties. Removal specialist and expert group have almost same ideas for project amount which has been hightestly weighed but owner's recognition has partially lower than specialists idea. There are almost no difference of recognition between three(3) parties for project kind. Idea comparison of reasonable unit work cost for asbestos removal work between three concerned parties has been analyzed and found out that expert group do unit work cost, 65% of which removal specialists estimate, in interior tex removal. And there is almost no difference between them in exterior roof slate removal. But there is considerable difference between them that owner estimates 50% unit cost of specialist one while expert group estimate 50% of specialist idea of unit removal cost.
Coconut shell activated carbon (CSAC) was investigated for its ability in the removal of two neutral chlorinated organic compounds, namely trichloroethylene (TCE) and dichloromethane (DCM) from aqueous solution using a packed bed column. The efficiency of the prepared activated carbon was also compared with a commercial activated carbon (CAC). The important design parameters such as flow rate and bed height were studied. In all the cases the lowest flow rate (5 mL/min) and the highest bed height (25 cm) resulted in maximum uptake and per cent removal. The experimental data were analysed using bed depth service time model (BDST) and Thomas model. The regeneration experiments including about five adsorption-desorption cycles were conducted. The suitable elutant selected from batch regeneration experiments (25% isopropyl alcohol) was used to desorb the loaded activated carbon in each cycle.
The objective of this study is to investigate the potential use of MSW incineration fly ash as an economic material for the removal of heavy metals (Pb, Mn, Fe, and Cu) from AMD. Batch adsorption experiment was conducted to examine the effects of pH, adsorbent dosage and contact time on metal ions removal in synthetic AMD using MSW incineration fly ash. Precipitation of calcium hydroxide and sodium hydroxide was used for comparison with MSW incineration fly ash by adjusting the pH (5 ~ 11) by coagulation method with 20 min reaction time. Comparing the application of Ca(OH)2 and Na(OH), fly ash proves more efficient which may be due to its porosity and chemical composition. The results from adsorption studies showed that maximum adsorption rate was achieved at 0.4g dose when various fly ash dosages were added to the solution with 60 min optimum time and removal efficiency of heavy metals was over 96%. The effectiveness of fly ash can be related to its high calcium (CaO 55%) content. Efficiency of heavy metals removal was directly linked to the amount of fly ash in the reaction mixture and to the final pH attained. pH plays a significant role in heavy metal uptake. The main removal mechanism was adsorption at the surface of the fly ash together with the precipitation and co- precipitation from the solution with chemicals. Therefore the use of MSW incineration fly ash for treatment of AMD would represent a new market opportunity for this waste product. It can also be useful for neutralizing AMD and possibly reduce its adverse effects to the environment with efficient removal of metal ions from AMD.