NFDC (Nuclear Fuel and materials Data Center) developed standard reference data for oxidation of HANA-6 cladding material. Thermo-gravimetric analyzer (TGA) was used to measure oxidation, and the measuring device was self-calibrated using standard materials. The oxidation amount of the HANA6 cladding was measured in an oxidizing atmosphere in the temperature range of 400 to 700°C. Through this, oxidation data, oxidation rate model equation, and graph were developed. The uncertainty factors were analyzed from the oxidation model. The expanded uncertainty of oxidation data was calculated by evaluating the uncertainty for each uncertainty factor. The oxidation data produced in this study was self-rated through deliberation by a specialized committee of NFDC and third experts. It was finally registered as a reference standard through the technical committee of the National Reference Standards Center. It is believed that the standard reference data developed in this study will be helpful for increasing reliability and stability evaluation of nuclear fuel and spent fuel.

National Standard Reference Center from Ministry of Trade Industry and Energy at Dec.30 2008. The fields of designation were nuclear fuel and energy materials. NFDC produces standard reference data of nuclear fuel and materials. To ensure reliability of experimental data uncertainty should be estimated. There are two kinds of uncertainty: A-type uncertainty from tester and B-type uncertainty from experimental equipments. To reduce the former, the measurement should be repeated for sufficient amount of times, and to reduce the latter type uncertainty all equipment have to be calibrated. In this study the uncertainty evaluation process of thermo-gravimetric analyzer (TGA) data was developed. The self calibration was performed using the standard mass and correction factor was obtained. The measurement model of oxidation was established, factors affected to uncertainty was analyzed, uncertainty of each factor using sensitivity coefficient was evaluated, combined uncertainty was calculated, and expanded uncertainty using coverage factor was calculated. It is believed that the uncertainty evaluation process of TGA data developed in this study will be helpful for increasing reliability and stability evaluation of nuclear fuel and spent fuel.

Korea Astronomy and Space Science Institute (KASI), direct decendant of Korea National Astronomy Observatory, has been publishing Korean Astronomical Almanac since in 1976. The almanac contains essential data in our daily lives such as the times of sunrise, sunset, moonrise, and moonset, conversion tables between luni-solar and solar calendars, and so forth. So, we are planning to register Korean astronomical almanac data for national Standard Reference Data(SRD), which is a scientific/technical data whose the reliablity and the accuracy are authorized by scientific analysis and evalution. To be certificated as national SRD, reference data has to satisfy several criteria such as traceability, consistency, uncertainty, and so on. Based on similarity among calculation processes, we classified astronomical almanac data into three groups: Class I, II, and III. We are planning to register them for national SRD in consecutive order. In this study, we analyzed Class I data which is aimed to register in 2009, and presented the results. Firstly, we found that the traceability and the consistency can be ensured by the usage of NASA/JPL DE405 ephemeris and by the comparsion with international data, respectively. To evaluate uncertainty in Class I data, we solved the mathematical model and determined the factors influencing the calculations. As a result, we found that the atmospheric refraction is the main factor and leads to a variation of ±16 seconds in the times of sunrise and sunset. We also briefly review the histories of astronomical almanac data and of standard reference data in Korea.