In this study, we investigate the effect of the diffusion barrier and substrate temperature on the length of carbon nanotubes. For synthesizing vertically aligned carbon nanotubes, thermal chemical vapor deposition is used and a substrate with a catalytic layer and a buffer layer is prepared using an e-beam evaporator. The length of the carbon nanotubes synthesized on the catalytic layer/diffusion barrier on the silicon substrate is longer than that without a diffusion barrier because the diffusion barrier prevents generation of silicon carbide from the diffusion of carbon atoms into the silicon substrate. The deposition temperature of the catalyst and alumina are varied from room temperature to 150°C, 200°C, and 250°C. On increasing the substrate temperature on depositing the buffer layer on the silicon substrate, shorter carbon nanotubes are obtained owing to the increased bonding force between the buffer layer and silicon substrate. The reason why different lengths of carbon nanotubes are obtained is that the higher bonding force between the buffer layer and the substrate layer prevents uniformity of catalytic islands for synthesizing carbon nanotubes.
We have investigated the structural and optical properties of Ga-doped ZnO (GZO) thin films deposited by RFmagnetron sputtering at various deposition temperatures from 100 to 500oC. All the GZO thin films are grown as a hexagonalwurtzite phase with highly c-axis preferred parameter. The structural and electrical properties are strongly related to depositiontemperature. The grain size increases with the increasing deposition temperature up to 400oC and then decreases at 500oC. Thedependence of grain size on the deposition temperature results from the variation of thermal activation energy. The resistivityof GZO thin film decreases with the increasing deposition temperature up to 300oC and then decreases up to 500oC. GZO thinfilm shows the lowest resistivity of 4.3×10−4Ωcm and highest electron concentration of 1.0×1021cm−3 at 300oC. The mobilityof GZO thin films increases with the increasing deposition temperature up to 400oC and then decreases at 500oC. GZO thinfilm shows the highest resistivity of 14.1cm2/Vs. The transmittance of GZO thin films in the visible range is above 87% atall the deposition temperatures. GZO is a feasible transparent electrode for the application to the transparent electrode of thinfilm solar cells.