Plutonium exhibits a variety of oxidation states and has a strong affinity for complexation with organic ligands. Isosaccharinic acid (ISA) is a major degradation product of cellulose materials present in the low to intermediate radioactive wastes. The interaction between trivalent plutonium and ISA can significantly impact the migration and containment of plutonium in the repository environment. In this study, formation of Pu(III) and ISA complexes was investigated at an ionic strength of 1 M of NaClO4 using UV-Vis absorption spectrophotometry. To exclude the effect of the Pu(III) oxidation, absorption spectra were measured within 10 min after adding ISA into Pu(III) solution and processed using HYPSPEC software for deconvolution after baseline correction. Several previous studies showed that the presence of ligands accelerates the oxidation of Pu(III) to Pu(IV). To investigate whether ISA complexation can also accelerate the Pu(III) oxidation, UV-Vis absorption spectra changes over 24 hours were analyzed as a function of the ratio of ISA to plutonium concentration.

We measured the degree of macrodispersion of the various single-walled carbon nanotubes (SWCNTs) and multi-walled carbon nanotubes (MWCNTs) using UV-VIS-NIR absorption spectroscopy. CNTs were dispersed with SDS of 2 wt % in deionized water using the homogenizer and then were further centrifugated at 6000 g for 10 min. The degree of macrodispersion, expressed by Dm(λ)=Aa(λ)/Ab(λ)*100 (%), where λ is the wavelength and Aa(λ) and Ab(λ) are the absorbance of the sample after and before centrifugation, respectively. In the case of MWCNTs, we evaluated the degree of macrodispersion by the average degree of macrodispersion (Dm(λ)) between 1000 and 1200 nm. The degree of macrodispersion of SWCNTs was evaluated at the wavelength in which van Hove singularity-related transition regions were excluded, i.e., the range was chosen between E11S and E22S peaks. We have estimated six samples with the same method. The standard deviation of each sample was lower than 5. Therefore, we presented a reliable evaluation method for the macrodispersion of CNTs for standardization.

We propose an evaluation method of the relative content of single-walled carbon nanotubes (SWCNT) in SWCNT soot synthesized by arc discharge using UV-VIS-NIR absorption spectroscopy. In this method, we consider the absorbance of semiconducting and metallic SWCNTs together to calculate the relative content of SWCNTs with respect to a highly purified reference. Our method provides the more reliable and realistic evaluation of SWCNT content with respect to the whole carbonaceous content than the previously reported method.

염산매질에서 산화/환원제를 사용하여 Pu 산화수를 조절한 후, UV-Visible-Near IR 분광기를 이용하여 Pu(III, IV, V, VI) 산화수에 대한 흡수스펙트럼을 측정하여 그 분광학적 특성을 고찰하였다. Pu(III)으로 조절하기 위하여 환원제인 HCl를 사용하였으며, Pu(IV)와 Pu(VI)로 조절하기 위하여 산화제인 및 를 각각 사용하였다. 또한 Pu(VI)로 조절된 용액에 환원제인 HCl를 사용하여 Pu(V)로 조절하였다. Pu(III)와 Pu(IV)의 대표적인 흡수피크는 470 nm 및 600 nm에서 각각 관찰되었고, Pu(VI)와 Pu(V)의 특성피크는 830 nm 및 1135nm에서 각각 관찰되었다. Pu(III, IV, VI) 산화상태의 시간 경과에 따른 흡수스펙트럼 변화는 관찰되지 않았으나 Pu(V)의 경우 매우 불안정하여 생성되자 마자 Pu(III)로 변화되었다.

Correlation among the wax-pigment composites which is base vehicles for the crepas was investigated in terms of fadeness. The base wax synthesized and pigments are compounded with petroleum lubricant and exposed under carbon arc individually. The yellowing phenomenon was appeared on the reference papers coated with the spindle oil which was then exposed. The papers were again extracted with distilled water and pH of them were ranged between 6.2-6.5. Color difference from Adam-Nickerson equation, △E of base wax is 0.15 and that of spindle oil are varied from 0.66 to 15.62. Since the main components of the petroleum lubricant are aromatic hydrocarbons which have absorptions characteric of UV ranging from 240 to 280 nm, fadeness characteristics of the composites are largely depend upon the change of molecular structure of spindle oil by absorbing UV. Thus the spindle oil having the following physical properties has the better resistance of fadness and is recommended to use in compounding the base wax-pigment composites: · main component: paraffinic hydrocarbon · pour point: below - 15℃ · UV absorption characteristics: λmax. : 268-290nm · absorbancy: below 0.1(0.03ml of sample/50ml of CHCl3)