최근 우수한 전기전도도와 넓은 비표면적을 갖는 탄소나노튜브(CNT)를 활용하여 고강도 및 고내구성 콘크리트의 생산을 위한 연구가 많은 연구자들에 의하여 활발히 이루어지고 있다. CNT의 혼입을 통한 콘크리트의 고강도에 대한 연구가 주를 이루고 있으나, 그 외의 연구는 미흡한 실정이다. 이에, 본 연구에서는 CNT 첨가량에 대한 시멘트 복합체의 역학성능 및 발열성능에 대한 평가를 실시하였다. 낮은 물-바인더 비를 기반으로 하는 시멘트-플라이애시 배합에 대하여, 바인더 중량대비 0.2% 및 0.5%의 CNT 첨가에 따른 재령별 압축강도, 수화특성분석을 위한 미소수화열 분석, 페이스트 내 CNT의 분산 및 주변 수화물과의 관계를 규명하기 위한 SEM분석, 기준전극 삽입을 통한 발열실험 및 열 중량 분석을 실시하였다. CNT 첨가량의 증가에 따라 발열성능은 증가하며, CNT가 첨가되지 않은 기준 배합 CNT가 첨가된 배합의 경우 동등수준의 역학성능을 갖는 것으로 나타났다.

In this paper, the mechanical properties of fresh concrete were evaluated by using electric arc furnace oxidizing slag(EOS) aggregate. Water-Cement(W/C) ratio was selected as 0.45 and 0.30, and the mixing amount of EOS aggregate as 0%, 50%, 100%. Experimental items of fresh concrete were slump, flow, air content, unit volume weight. As a results, As the mixing amount of EOS aggregate increased, the slump and flow increased but the air content decreased.

In this paper, the mechanical properties of hardened concrete were evaluated by using electric arc furnace oxidizing slag(EOS) aggregate. Water-Cement(W/C) ratio was selected as 0.45 and 0.30, and the mixing amount of EOS aggregate as 0%, 50%, 100%. Experiments were carried out to compare the unit volume weights by concrete mixing, and the compressive strength test was carried out at 28 days of age. The unit volume weight and compressive strength of the EOS aggregate increased as the amount of the mixture increased. It also shows the difference according to the W/C ratio.

This study was investigated the influence of increase in compressive strength according to water reducing ratio. As a result of the analysis, it is determined that compressive strength according to water reducing ratio was increased by increasing the efficiency of cement.

In this experiment, the high early strength cement containing massive C3S quantity was used to enhance the early strength of cement mortar using admixtures which can accelerate C3S hydration reaction in the condition of room temperature. The measuring items are zero flow, setting times, compressive strength and analysis of MIP & SEM