Zinc injection into the coolant system of nuclear power plants is an effective method for reducing corrosion and improving performance. The effectiveness of this method is influenced by various factors such as zinc concentration and injection rate. This paper provides an overview of the factors affecting the effectiveness of zinc injection in nuclear power plants, with a focus on zinc concentration and injection rate, and discusses various research results on the effects of these factors on corrosion reduction and coolant system performance. Zinc concentration is an important factor affecting the effectiveness of zinc injection. The research results show that gradual increases in zinc concentration are more effective for coolant system stability. However, the concentration should not exceed the recommended levels as high zinc concentrations can have negative effects on the system. Injection rate is also an important factor affecting the effectiveness of this method. The research results show that gradual increases in injection rate are more effective for coolant system stability. However, excessive injection rates can have negative effects on the system such as overload of the zinc injection facility and chemical shocks within the coolant system, and therefore, should be optimized. In conclusion, zinc concentration and injection rate are important factors affecting the effectiveness of zinc injection in nuclear power plants. The optimal concentration and injection rate should be determined based on specific reactor conditions and system requirements, and efforts should be made to maximize corrosion reduction and performance improvement.

Korean innovative SMR has been implemented developing with improved safety/economy and i- SMR technology development project to secure a competitive edge in SMR. For nuclear power plants, according to the revision of the Nuclear Safety Act (2013.6), it is mandatory to be reflected in the aging management program of nuclear power plants, and the aging management and regulation of major nuclear power plants are being strengthened. For i-SMR, chemistry environment and management strategy is essential to mitigate corrosion and radiation fields, since it has compacted and integrated module designs. Since 1994, zinc injection into the reactor coolant system (RCS) has been applied more than 100 PWRs in the world to mitigate primary water stress corrosion cracking (PWSCC) and to reduce outof- core radiation fields. In domestic NPPs, 7 have been applying zinc injection and had up to 90% radiation field reductions. For this reason, SMR needs to apply zinc injection for chemistry strategy. Zinc target concentration will be 5~40 ppb at i-SMR, based on Ni-Fe-Cr materials as same as PWRs. Zinc injection location is in volume and purification control system between the volume control tank and charging P/P where the pressure is moderate. Zinc injection skid can consist of two micro-controllable pump (one for operation and one for stand-by) and one injection tank (batching tank for zinc solution). Zn, Ni, Si, Fe, and activated corrosion products should be monitored to identify zinc injection controls and trends. Flux mapping for core performance monitoring should be evaluated. The application of zinc will be essential and effective and bring sustainable reliability for corrosion control and mitigation strategy to meet the risk-free i-SMR development.