This work focuses on the fabrication of excellent magnetic structures for trapping breast cancer cells. Micromagnetic structures were patterned for trapping cancer cells by depositing 30 nm of permalloy on a silicon substrate. These structures were designed and fabricated using two fabrication techniques: electron beam lithography and laser direct writing. Two types of magnetic structures, rectangular wire and zig-zagged wire, were created on a silicon substrate. The length of each rectangular wire and each straight line of zig-zagged wire was 150 μm with a range of widths from 1 to 15 μm for rectangular and 1, 5, 10 and 15 μm for zigzag, respectively. The magnetic structures showed good responses to the applied magnetic field despite adding layers of silicon nitride and polyethylene glycol. The results showed that Si + Si3N4 + PEG exhibited the best adhesion of cells to the surface, followed by Si + Py + Si3N4 + PEG. concentration of 5-6 with permalloy indicates that this layer affected silicon nitride in the presence of Polyethylene glycolPEG.

30KV 전자빔리소그래피 장치를 사용하여 PMMA 3000Å/P(MMA/MAA) 6000Å의 이중구조에서 foot width 0.1μm이하, head width 0.4μm의 T-gate를 형성하였다. PMMA/P(MMA/MAA)/GaAS 구조에 대한 Monte Carlo 시뮬레이션 결과, 산란반경 0.1μm에서 전방산란전자와 후방산란전자의 에너지 비는 19.5:1로 나타났다. 전자빔리소그래피 공정에 필요한 PMMA 및 P(MMA/MMA)의 열처리 조건, 설게 선폭에 대한 패턴감도를 구하였다. MIBK : IPA = 1 : 1 현상액에 대한 PMMA 및 P(MMA/MAA)의 감마값(gamma value)은 2.3이었다. 광 및 전자빔리소그래피 장치의 혼합사용(mix-and-match) 결과 층간정렬도 (alignment accuracy)는 0.1μm(3σ) 이하를 얻었다.