As a basic study for the removal of oxygen in solid Nd metal by metal Ca vapour, by using the thermodynamic data such as ΔG-T diagrams and Nd-O and Nd-Ca equilibrium diagrams, the amount of residual oxygen in solid Nd metal formed based on deoxidation reaction by Ca vapour, instead of by direct contact of solid Nd metal and Ca solution, was determined. Deoxidation experiments were carried out for solid Nd metal in a temperature range of 890~970 ℃ for 1h to 4h and content of addition Ca of 0.6~1.8 g (5~15 wt% of solid Nd metal). As a result, it was found that as deoxidation temperature increased, dissolved oxygen decreased. Especially, it was observed that a small amount of Nd-Ca alloy liquid was formed on the surface of the solid Nd metal sample deoxidized at 970 ℃ for approximately 1 hour. Also, it was found that if the content of addition Ca was 1.8 g (15 wt% of solid Nd metal) the amount of produced Nd-Ca alloy increased slightly. However, for the Nd sample with which the deoxidation reaction was performed at 930 ℃ for 4h with content of addition of Ca of 1.5 g (13 wt% of Nd metal), the residual oxygen was found to decreased to 12.00 ppm.

In this research, carbon dioxide is captured and chemically converted to high purity calcium carbonate salt which can be used for various industrial fields. Aqueous indirect inorganic carbonation methods were applied throughout the research and seawater-based industrial wastewater was utilized for metal ion supply. For CO2 capture, representative alkanolamine absorbent solutions in 30 wt% concentration were used, that is, monoethanolamine (MEA), diethanolamine (DEA), and methyldiethanolamine (MDEA). For high purity metal ion separation, calcium ion contained in the seawater-based industrial waster was separated in the form of gypsum followed by the carbonation reaction to form high purity calcium carbonate salt. Consiering the final products and their economic cost, the cycle using MEA will be proper. However, if MDEA can be used, the amount of carbon dioxide capture capacity per cycle would be great. Also, conceptual continuous cycle which produces calcium carbonate and magnesium carbonate was suggested. This research may help the nations such as European nations or east asian countries like Korea and Japan where no adequate CO2 storages exist and crust activities are in progress, if commercialized.