목조건축물에 주로 적용되고 있는 철물 접합 시스템은 모재인 나무와 접합부재인 철재 간의 강도 차이 및 재질의 이질성으로 인한 외관상의 위화감 등이 문제점으로 대두되고 있다. 재료 가공의 편의성으로 프리컷 시스템이 도입되었고, 시공성 을 해결하기 위한 새로운 재료 및 시스템의 개발이 요구된다. 본 연구에서는 자연재료를 그 원료로 하여 미관상 목조건축물에 위화감이 없는 황토 압밀 플레이트를 개발하였다. 황토 및 소석회를 원료로 하여 제작한 시험체의 양생방법(기건 양생, CO2 양 생)에 따른 성능을 평가하기 위해 질량 변화, 지압 강도, 흡수율, 표면상태, 열중량변화 측정 및 SEM을 통한 생성광물의 미시적인 부분을 관찰하였다. 또한 제조과정에서의 온실가스 배출 및 흡수에 따른 환경성능평가를 수행하였다. 기건 양생한 시험체에 비해 CO2 챔버에 양생한 시험체는 원료인 소석회의 탄산화 반응으로 인한 탄산칼슘의 생성으로 역학적 성능이 향상되었다는 것을 알 수 있었으며, 원료인 소석회의 탄산화반응으로 인해 생석회 제조시 발생하는 CO2량의 70% 이상을 재흡수 한다는 것을 알 수 있었다.

This study examines the joint and splice of wooden structure at Geunjeongjeon Hall of Gyengbok Palace, which was constructed in the late Joseon Dynasty. The scope of the study is on the part of columns, the bracket sets, and the frame structure. This research also deals with the relationship between vortical load and horizontal load. Firstly, the examination of the joint and splice methods between the pillar and penetrating ties is on the joint and splice methods of the outer and corner. Through the investigation, it is verified that the joint methods between pillar and penetrating tie on the outer and corner pillars is the method of Sagal joints(cross joints, 사개맞춤). Joints used between pillar and penetrating tie are dovetailed tenon joints, between columns and Anchogong(안초공), between columns and Choikgong(초익공) are tenon joint(장부맞춤). Secondly, the examination of the joint and splice methods of the bracket set is on that of Salmi and Cheomcha(첨차), and Salmi and Janghyeo(장혀). Joints used between Salmi and Cheomcha, Salmi and Janghyeo are halved joint, and between each Janghyeo are stepped dovetailed splice. It is Cheomcha that is used the Jujang-Cheomcha(주장첨차) on center line. Therefore it is connected with each bracket set, which gets to is the strong system, easy and convenient on the construction of that. Thirdly, the frame structure of wooden architecture in royal palace is consist of purlins and beams, Janghyeo(장혀, timber under purlin), tall columns, king posts, etc. Through the investigation, it is verified that the joint and splice methods between purlins and beams are used with the methods of Sungeoteok joint(숭어턱맞춤). It is verified that the joint and splice methods between beams and high columns are used with methods of mortise and tenon joint(장부맞춤), is highly related with tensile force. To reduce the separation of parts, sangi(산지) and tishoi(띠쇠) are used as a counterproposal, which were generally used for architecture in royal Palaces in the late Joseon Dynasty and continued to be used until these days common wooden architecture.