PURPOSES : A North Korean private-financed highway is constructed in this study using an appropriate financing introduction method.
METHODS : Based on the North Korea traffic demand prediction model, we assume that private finance investors construct three lines in North Korea. In addition, private finance can recover invested money with real toll income via the South Korean toll system in 30 years.
RESULTS : The results indicate that private finance parties can recover invested money in two lines in North Korea within 30 years, whereas the remaining line cannot. A collection period is 30 years, the future traffic volume, utilization rate by vehicle type, and toll rate based on the Korea Highway Corporation system are assumed.
CONCLUSIONS : The public private partnership market undergoes many types of changes. In the early stages of private investment projects in England, the toll model is implemented, followed by the shadow toll model. Subsequently, the availability payment model is implemented. To promote private finance funding for the North Korean expressway, the South Korea government should subsidize money for uncollectable lines. Using these models, the availability payment and hybrid annuity model will reduce the risks of private parties in North Korea private financed highways.
PURPOSES : In this study, a Design Support Automatic Program for NATM (new Austrian tunneling method) tunnels based on BIM that can generate shape information including property information via the development of BIM libraries and the construction of a library design support automatic program is developed.
METHODS : In this study, the abovementioned program is developed as an add-in Revit program. AutoDesk's program has the highest utilization rate, and it allows support tools to be added easily. Construction information classification based on WBS(Work Breakdown Structure) is developed. Subsequently, library construction and program development algorithms are developed.
RESULTS : The automatic program constructs a library that reflects geometric characteristics through the construction of a library automatic module as well as generates three0-dimensional (3D) shape information by mapping between the constructed library and 3D informal alignment. The proposed program can automatically assemble a constructed library through the development of an algorithm for generating sequences of 3D shape information and automatically place models on a 3D terrain.
CONCLUSIONS : The proposed automatic program can be designed and changed easily. It is expected to contribute to improvements in the speed of 3D NATM tunnel modeling and the efficiency of NATM tunnel design.
PURPOSES : On a thin epoxy overlay pavement, epoxy is placed on the existing bridge deck pavement, followed by the spraying of aggregates on it. The bond strength between the existing pavement and overlay pavement is an important factor representing the performance of the thin epoxy overlay pavement, in addition to the skid resistance and roughness. Therefore, the bond strength, skid resistance, and roughness of a thin epoxy overlay pavement constructed for field tests under various field conditions are examined in this study.
METHODS : The usability of epoxy and aggregates on a thin epoxy overlay pavement is identified by testing their material properties in a laboratory. A construction test is performed using the pretreatment conditions of the existing pavement surface and the number of layers of overlay pavement as variables. The bond strength, skid resistance, and roughness are analyzed 3 d after constructing the test pavement, and immediately before and after applying repetitive traffic loadings at 6 months.
RESULTS : When the existing pavement is in good condition, as in this study, the bond strength of the thin epoxy overlay pavement is affected more significantly by the existing pavement condition than the material properties of epoxy, in which destruction is indicated in the existing pavement. The skid resistance is affected primarily by the condition of the aggregates sprayed on the epoxy. The pavement on which the aggregates are well sprayed indicate a high skid resistance. The roughness is not affected by any variables, such as the pretreatment conditions, number of thin pavement layers, and repetitive traffic loadings.
CONCLUSIONS : A long-term evaluation of the bond strength, skid resistance, and roughness will be conducted on a test pavement. In addition, another construction test will be performed to investigate the performance of a thin epoxy pavement overlaid on a bridge deck pavement under inferior conditions.
PURPOSES : This study is performed first to define the aging of road facilities and to analyze the effects of environmental factors on the deterioration of median barriers.
METHODS : The aging of road facilities is defined using an analytical hierarchy process (AHP). The first stage is associated with the period, facilities, and maintenance, whereas the second stage is associated with the details. The effects of environmental factors on the deterioration are analyzed by measuring the carbonation depth and compression strength. Two regions, i.e., Gangwon and Busan, are compared separately. Top, middle, and bottom samples are analyzed for both regions.
RESULTS : Based on the result of the AHP analysis, weights for period (0.220), function (0.410), and maintenance (0.370) are derived. The average carbonation depths are 11.12 and 9.78 mm for Kangwon and Busan, respectively. The estimated values of compressive strength at Gangwon are 19.7 MPa (Wonju), 24.7 MPa (Samcheok A), and 25.9 MPa (Samcheok B), 20.2 MPa (Haeundae), 23.8 MPa (Yeongdo), and 29.5 MPa (Nam).
CONCLUSIONS : The aging of road facilities is associated with subpar functionality and durability. Furthermore, the median barriers constructed in the Gangwon region deteriorated more significantly than those in the Busan region owing to environmental factors. In addition, the bottom samples are more affected by aging than the top samples.
PURPOSES : The objective of this study is to evaluate the mechanical properties of ternary blended cement concrete incorporated with pulverized reject ash (PRA) or pulverized fuel ash (PFA) based on a comparison with those of ordinary Portland cement (OPC) concrete.
METHODS : To produce the concretes, the level of OPC replacement is set at 60%, which comprises 30%~45% ground granulate blast furnace slag and 15%~25% of fly ash (FA). The FA can be categorized into PFA, 4PRA (fineness 3,930 cm2/g3), and 8PRA (fineness 7,840 cm2/g3). The compressive strength, surface electric resistivity, initial absorption coefficient, and chloride ion penetrability of OPC and the ternary blended cement concrete are measured at predetermined periods after water curing.
RESULTS : It is discovered that the mechanical properties of concrete with 8PRA are better than those of OPC concrete. The performance of 4PRA concrete is worse than that of 8PRA concrete, indicating that the fineness of the PRA can affect the mechanical properties of the ternary blended cement concrete.
CONCLUSIONS : The use of PRA is feasible for the production of ternary blended cement concrete, provided that the appropriate mix design and grinding technology are used.
PURPOSES : In this study, experimental findings regarding the frost resistance of concrete incorporated with mineral admixtures such as fly ash (FA) and ground granulated blast-furnace slag (SG) are presented.
METHODS : To evaluate the performance of the abovementioned concretes under repeated freezing and thawing environments, based on the ASTM C 666 standard, the relative dynamic modulus of elasticity and mass ratio measurements are performed regularly. Furthermore, based on the ASTM C 672 standard, the concretes are exposed to 4% CaCl2 and NaCl salt solutions along with repeated 50 cycles of freezing and thawing. Subsequently, the scaling resistance is evaluated based on the scaled-off mass content and visual examination.
RESULTS : SG is less effective in enhancing the scaling resistance of concrete compared with FA. However, the concrete incorporated with SG is more resistant to repeated freeze-thaw actions compared with OPC concrete. Meanwhile, compared with OPC concrete, the concrete incorporated with FA indicates a similar performance in terms of scaling resistance and better resistance against repeated freeze-thaw actions.
CONCLUSIONS : The frost resistance of concrete depends significantly on the types of mineral admixtures used in concrete. This emphasizes the importance of selecting the appropriate binder to achieve durable concrete pavements in cold climate regions.
PURPOSES : In a previous study, an error was detected in data pertaining to the direction and velocity of a roller. Hence, in this study, the correlation between these two variables and acceleration data is analyzed. Relevant algorithms are developed by adding variables to existing algorithms.
METHODS : A tachometer and GPS are used to acquire the velocity, compaction direction of rollers, and number of compactions. Subsequently, data input to an accelerometer are compared and analyzed.
RESULTS : Based on FFT analysis, it is discovered that the data are inaccurate when a forward reverse is performed. Using the GPS, the velocity of the roller is differentiated based on the number of pledges, and then added as a variable to the algorithm. Subsequently, it is evaluated and analyzed only with data during forward movement based on changes in the latitude and longitude.
CONCLUSIONS : It is discovered that the acceleration data values from both the left and right rollers differ owing to their weight difference, as indicated by the asphalt gradient. Data changes based on asphalt gradients are analyzed using gyro sensors. If the correlation between the two sets of data is high, then the algorithm is advanced by introducing a cross spectrum after calibrating the acceleration value based on the gradient.
PURPOSES : The actual service life of repair methods applied to cement concrete pavement is analyzed based on de-icing agent usage.
METHODS : Highway PMS data pertaining to de-icing agent usage are classified into three grades: low (1~5 ton/lane/year), medium (5~8 ton/lane/year), and high (greater than 8 ton/lane/year). The repair methods considered include diamond grinding, patching, joint repair, partial depth repair, and asphalt overlay on five major highways. The service life of each repair method is analyzed based on the usage level of the de-icing agent.
RESULTS : The service lives of the applied repair methods are much shorter than expected. It is confirmed that the service life afforded by diamond grinding, patching, and joint repair methods are not significantly affected by the use of de-icing agents, whereas that afforded by asphalt overlay and partial depth repair methods is affected significantly. The service life afforded by the asphalt overlay and partial depth repair methods decreases at high usage levels of the de-icing agent (greater than 8 ton/lane/year).
CONCLUSIONS : Among the repair methods considered, the service life afforded by partial depth repair and asphalt overlay is affected significantly by the amount of de-icing agent used. Additionally, the differences between the expected and actual analyzed service lives should be considered in the next-generation maintenance strategy for cement concrete pavements.
PURPOSES : The purpose of this study is to suggest a thermal expansion coefficient measurement method using an embedded strain transducer (EST) and vibrating wire gauge (VWG), as well as to evaluate the reliability of the proposed methods by comparing them with the AASHTO T 336-10 standard method.
METHODS : To apply the AASHTO 336-10 test method, which is the criterion for reliability evaluation, a reference specimen using stainless steel (sus304) is manufactured, and a thermal expansion coefficient of 17.308με/°C is obtained based on ISO regulations. Using the reference specimen, the correction factor of the thermal expansion coefficient measurement equipment is measured to be 2.93με/°C, and using this value, the thermal expansion coefficient of the mortar specimen containing the embedded gauges is measured accurately. The reliability of the proposed experimental method is evaluated by measuring the thermal expansion coefficient of the embedded gauge with temperature compensation and then comparing it with that of the reference specimen.
RESULTS : The coefficient of thermal expansion of the mortar specimen is measured to be 12.423με/°C based on AASHTO 336-10, 11.963με/°C using the EST method, and 12.522με/°C using the VWG method. Based on the results obtained using the AASHTO method, the embedded gauges show a difference of 1%~3% in terms of the average results, as well as a difference in the standard deviation of 0.059~0.186. Therefore, our level of confidence in the thermal expansion coefficient experiment using the embedded gauges is high.
CONCLUSIONS : When using the AASHTO 336-10 test method, the thermal expansion coefficient should be obtained by measuring the length change of the specimen; however, some engineering judgment of the experimenter is required when the measurement values fluctuate during the temperature stabilization period. In the thermal expansion coefficient test using embedded gauges (EST and VWG), temperature compensation must be performed. Furthermore, it is assumed that the temperature difference between the water tank and test specimen does not significantly affect the thermal expansion coefficient measurement because the important point is not the actual temperature value but the temperature gradient. For reliability evaluation, a statistical significance review of the strain distribution by measurement method is performed via a T-test comparing with the AASHTO test result (12.423με/°C) and the reliability level for each measurement method remains confidential.
PURPOSES : The purpose of this study is to identify the dynamic behavior of a cement concrete paving machine (paver) by measuring its response using accelerometers. This is because the dynamic behavior of pavers affects the quality of data from various applications of IoT sensors, such as laser, ultrasonic, optical sensors and so on. Therefore, it is believed that the understanding of dynamic behaviors can contribute to the effective use of various IoT sensors for the acquisition of real-time quality control data in pavement construction.
METHODS : Dynamic signals are obtained using accelerometer sensors to identify the dynamic characteristics of paving machines. The main parameters for acquiring dynamic signals are the status of the machine’s operating or standby conditions, and available locations for attaching various IoT sensors. Time domain data are logged at a particular sampling speed using a low-pass filter, subsequently, they are converted to digital data, which are analyzed on three rectangular axes. In addition frequency analysis is conducted on the measured data for identifying the peak frequencies, via FFT (Fast-Fourier-Transform) using MATLAB.
RESULTS : The magnitude of the x-directional vibration is higher than that of any other direction under the paver’s operating or standby condition. However, signals from the smoother beam show that the z-directional vibration is more significant in the operating status. It means that the primary vibration depends on the location. Furthermore, the peak frequencies are quite various depending on the status of a paver and its sensing location.
CONCLUSIONS : The magnitude of machine vibration and peak frequencies at each status or location are identified from time- and frequency-domain data. When using IoT sensors for quality control or monitoring pavements in construction, the dynamic characteristics of a paver should be considered to mitigate the interference of signals from the paver body or its elements.
PURPOSES : The purpose of this study is to analyze the crack and vertical behaviors of a continuously reinforced concrete pavement (CRCP) under three different steel ratios (0.6%, 0.7%, and 0.8%) using field measurement data acquired from isolated concrete slabs with transverse cracks.
METHODS : Using an LVDT and a crack gauge, CRCP behavior data are acquired by segmenting a concrete slab into multiple sections based on the similarity in the longitudinal steel ratio of each section. To examine the vertical behavior of CRCP based on longitudinal steel ratios, three field experiments are conducted in February, May, and September three years after project completion. The minimum and maximum ambient temperature data for each section are acquired during the experiments. Using the data acquired, the vertical and crack behaviors of CRCP with 0.6% of longitudinal steel ratios are analyzed. In addition, the effect of the steel ratio on the vertical behavior as well as seasonal vertical behaviors are examined.
RESULTS : Analysis of the vertical behavior of concrete slabs with a 0.6% steel ratio shows that the minimum vertical displacement occurred at the center of the slab, whereas a significant vertical displacement is detected on the edges of the slab. Based on examining vertical displacements formed along the direction of transverse cracks, it is observed that the vertical behavior is prominent around the shoulders, whereas similar vertical behaviors are observed at the center and joints of the slab. Furthermore, it is discovered that the minimum crack occurred at the center of the transverse cracks, whereas the maximum crack occurred on the shoulders and joints. Furthermore, it appears that the daily displacements of the vertical behavior at the center of the slab constitute approximately one-half of the daily displacements on the joints. Based on the results of vertical behavior as a function of the longitudinal steel ratios, it is discovered that steel ratios of 0.7% and 0.8% yield the most prominent vertical behaviors around the edge of the shoulder in the winter, spring, and fall seasons. The seasonal deviations of the vertical behaviors based on the measuring positions of the longitudinal steel ratios appear less significant at the center of the slab than those on the shoulder. In particular, for the slab with a steel ratio of 0.8%, subtle vertical behaviors are observed at the center. It is discovered that the seasonal deviation of the vertical behavior measurements varying by the measuring locations of the steel ratios appears less significant at the center of the slab than at the shoulder, and that it decreases with the steel ratio.
CONCLUSIONS : CRCP generates cracks on the slab; however, they are managed by rebars in the CRCP. This study reveals that the major vertical and crack behaviors of CRCP occur around the shoulders than at the center of the CRCP slab. Therefore, new methods for managing cracks on the CRCP shoulder should be developed to improve the performance of CRCP. It is hoped that the results presented herein will be useful for the advanced analysis of CRCP behaviors.
PURPOSES : High concentrations of particulate matter (PM) are emitted or generated from vehicle emissions in urban roads with dense transient populations. To reduce the effect of PM emission on bus stop users at roadsides, a plan to reduce PM emitted from the roadside must be devised. In this study, an atmospheric environment at a roadside is simulated in a large-scale environment chamber, and a test for reducing PM around the bus stop is conducted by installing a bus stop adapted to a PM reduction system.
METHODS : Exhaust gas is injected into the experimental and reference chambers using diesel and gasoline vehicles for roadside airquality simulations. The two vehicles are operated in an idle state without an acceleration operation to emit exhaust gas uniformly, and the initial conditions are achieved by injecting car emissions for approximately 40 min. The initial condition is set to 1 ppm of NOx concentration in the environment chamber. Between the two environment chambers, a bus stop adapted to the PM reduction system is installed in the experimental chamber to conduct a PM reduction experiment pertaining to the air quality around the roadside. The experimental progress is set as the start time of the experiment based on the time at which the initial conditions are achieved; simultaneously, the PM reduction system in the experimental chamber is operated. After the simulation is commenced, the PM concentration, which changes over time, is measured using a high-resolution time-of-flight aerosol mass spectrometer (HR-ToF-AMS) without additional injection of car emissions or pollutants. The HR-ToF-AMS measures the chemical composition of non-refractory PM1.0 (NR-PM1.0) in real time.
RESULTS : The NR-PM1.0 compound (organic aerosol (OA), NO3 -, SO4 2-) increases by 160% compared with the simulated initial concentration up to T90min in both environmental chambers; this is speculated to be due to secondary formation. The reference chamber indicates a slight decrease or a steady-state after T90min, whereas the experimental chamber indicates a gradually decrease as the experiment progresses. The bus stop adapted to the PM reduction system reduces the amount of black carbon in the experimental chamber by 37% at 200 min. This implies that the PM emitted from the roadside is filtered via the PM reduction system installed at the bus stop, and cleaner air quality can be provided to passengers.
CONCLUSIONS : The PM reduction system evaluated in this study can be detached from and attached to the outdoor billboard of a bus stop. Since it adopts air filtration technology that uses a high-efficiency particulate air filter, it can be maintained and managed easily. In addition, it can provide an atmospheric environment with reduced PM emission to passengers as well as provide a better air-quality condition to passengers waiting for public transportation near roadsides.
PURPOSES : The purpose of this study is to preliminarily examine the field applicability of modular pavement marking tape (PMT) to increase the lane awareness of motorists on existing roadways.
METHODS : A pavement marking tape (PMT) comprises an adhesion layer and a paint coating layer. The adhesion layer is prepared using gussasphalt-based materials that have properties similar to those of existing asphalt materials. Thermal adhesion is performed to adhere the tape to the pavement. For the paint coating layer, polyurea materials are selected after reviewing the existing materials suitable for pavement lane marking. To conduct field evaluations on the adhesion layer, monitoring is performed after the pilot deployment of the PMT is completed. Twelve samples are prepared to investigate the optimal ratios for the mixture of paint coating layer materials. The durability of the PMT is examined using a turntable road-marking test system (RPA) with a wheel load on the samples. A total of 50,000 RPA, equivalent to P4, is performed. The performance is evaluated by capturing the retroreflectivity measure, which is used as an indicator of the pavement marking performance. The PMT is utilized on a roadway segment with significant heavy vehicle traffic, and continuous monitoring is performed to examine its performance in the field.
RESULTS : Based on a visual inspection of the adhesion layer material, no significant issue is observed in terms of the adhesion performance of the PMT. Furthermore, the overall retroreflectivity obtained from the RPA exceeds 300 mcd/m2·lux. It is discovered that the optimal ratios for the mixture of polyurea and binder for the paint coating layer are 4:6 and 2:8, respectively, which results in a retroreflectivity that is 90% or above the initial retroreflectivity. Using a prototype of the PMT for field tests, a performance evaluation is conducted by analyzing the retroreflectivity measured after 2 and 7 weeks from the prototype deployment. The retroreflectivity measured for the first 2 weeks after the deployment appears acceptable for field use. However, the retroreflectivity is reduced significantly when it is measured 7 weeks after deployment, resulting in the necessity for a more reliable material that can retain long-term durability.
CONCLUSIONS : The lane awareness of a motorist is crucial for accident mitigation under not only nighttime driving, but also severe weather conditions. In this regard, modular PMT is expected to increase the lane awareness of motorists, thereby improving the quality of lane marking materials. In this study, various exploratory field tests are conducted to analyze the field applicability of the PMT. It is noteworthy that the results presented herein are obtained from preliminary performance evaluations of the PMT. Hence, further investigations pertaining to the long-term durability of PMTs must be conducted using advanced test equipment such as an accelerated pavement tester.
PURPOSES : The purpose of this study is to evaluate an asphalt mixture via field application to utilize basalt aggregates produced on Jeju Island for a warm mix asphalt (WMA).
METHODS : Using commercially available WMA additives, an indoor experiment is conducted on low- and high-void aggregates among basalt aggregates on Jeju Island. The physical properties of the WMA mixture are evaluated using one solid type and two liquid types of WMA additive. To evaluate the applicability of the WMA additives, air void, saturation, aggregate void, Marshall stability, flow number, indirect tensile strength, and toughness tests are performed. For the field application of WMA using basalt aggregates, three types of pavements (HMA, WMA-Solid, and WMA-liquid) are constructed. When applying the pavements in the field, an anti-stripping agent is incorporated to improve the water resistance while considering the characteristics of the basalt aggregate. Samples are acquired via plant and field coring to evaluate the properties of the materials applied in the field.
RESULTS : In the indoor test for analyzing the applicability of the commercialized WMA additives to basalt aggregates, all tests except the indirect tensile strength test show results that satisfy the standards. All test results, including that from the indirect tensile strength test, satisfy the standard values in the test that uses the sample material obtained from the plant. Similarly, in the test with field cores, all test results satisfy the standard values. Therefore, the experimental value in the field application is generally higher than the test value in the indoor experiment. It is inferred that this is due to the difference between the basalt aggregates used in the indoor and field experiments, as well as the addition of the anti-stripping agent.
CONCLUSIONS : Basalt aggregates produced on Jeju Island can be used for WMA pavements, as demonstrated via indoor experiments and field applications. However, owing to the characteristics of basalt aggregates, a method for improving water resistance should be considered, and tests to determine the indirect tensile strength should be performed using various basalt aggregates. In addition, because various basalt aggregates exist owing to the diverse geology characteristics of Jeju Island, they should be evaluated via more experiments and field applications.
PURPOSES : The purpose of this study is to identify a gradation control method that minimizes the volatility of recycled aggregates to maintain the quality of reclaimed asphalt mixtures. METHODS : In this study, two types (0~13 and 0~10 mm) of recycled aggregate stockpiles with an extraction viscosity of 40,000 poise and a 19 mm hot asphalt mixture with virgin aggregates are used. The test methods are evaluated for plastic deformation resistance using the Hamburg wheel-tracking test and for low-temperature crack resistance using the dynamic modulus test. In the field, the performance is evaluated via an accelerated pavement test.
RESULTS : The Hamburg wheel-tracking test shows good water resistance as well as less than 5 mm of deformation. The result of a dynamic modulus test at -5 °C shows a 92.9% low-temperature crack resistance as compared with that of the 19 mm dense grade hot-mix asphalt mixture. The result of the accelerated pavement test confirms that the performances of the 19 mm dense grade hot-mix asphalt mixture and reclaimed asphalt mixture are equal owing a 1.2 cm plastic deformation.
CONCLUSIONS : By evaluating the plastic deformation resistance and crack resistance of the reclaimed asphalt mixture based on a stockpile gradation controlled at 0~10 mm via an indoor test, it is discovered that the plastic deformation resistance increases partially, whereas the crack resistance remains almost unchanged. The accelerated pavement test confirms that a performance equivalent to that of a 19 mm dense grade hot-mix asphalt mixture is achieved.
PURPOSES : The logistic roads for freight transport along to the new port of Busan have been suffered by the rapid weather changes including high temperature and torrential rain. As a result, the roads require annual repair, which have been distressed seriously by the heavy logistic and environmental loads. Therefore, we need to identify the cause of the road pavement distresses and find a proper design method to minimize the pavement distress in order to prohibit the problem aggravated.
METHODS : The damaged conditions of the logistic roads were investigated on-site. In addition, applied pavement designs, real traffic volumes, and historical climatic information were intensively collected for this project. With the investigated and collected data Korean pavement design program (KPRP) was implemented to analyzed the causes of the damaged roads and conceive the pavement design draft optimized for the roads.
RESULTS : According to the investigation and KPRP analysis, the traffic volume to transport freights impacts significantly the pavement distress, so that a higher PG grade binder type should be used, for which polymer modified asphalt (PMA) binders are recommended. Moreover, its pavement thickness should be increased to secure load bearing capacity, but thickening the pavement has been discouraged due to difficulties induced by the road-sectional change, especially road-height change.
CONCLUSIONS : In conclusion, 5cm PMA overlay is suggested for the normal-scale maintenance, and 7cm PMA overlay for large-scale maintenance. Besides these, the application of Polymer-modified Stone Matrix Asphalt (PSMA) using PG76-22 binder would be the best preventive maintenance method, which has been well know as having higher fatigue resistant performance than general PMA. However, if we use PSMA, quality control should be very cautious since PSMA can be very susceptible premature distress if its production and construction are improperly proceeded.
PURPOSES : The purpose of this study is to present a cross section suitable for low-traffic road pavement considering the environmental characteristics of Vietnam.
METHODS : The behavior of the pavement with respect to the axial load was numerically analyzed using the nonlinear finite element method. The elastic-plastic material model was applied to material properties such as subgrade, sub-base layer, and base layer, and whether the material yielded was determined. In order to evaluate the adequacy of the cross section of the Vietnamese low-traffic pavement, it was compared with the KPRP Lv 3 road pavement section. And it was compared with the newly proposed MAST composite Pavement. The design life of each pavement section was calculated using the results obtained from the pavement structural analysis.
RESULTS : The cross section of the Vietnamese low-traffic road pavement, KPRP lv3, MAST composite Type1 road pavement did not satisfy the design criteria for fatigue cracking and rutting. MAST composite Type2 was analyzed considering CTAB having 100mm and 150mm thickness and compressive strength of 5MPa, 10MPa, 15MPa and 20MPa, and all of them satisfied the design criteria.
CONCLUSIONS : The low-traffic road pavement section in Vietnam currently used is judged to be inappropriate, and the MAST Composite type 2 proposed in this study is evaluated as an appropriate alternative. Further studies such as field application are needed in the future.
PURPOSES : Disabled people have a low employment rate and poor working conditions, making it difficult for them to get a job compared to non-disabled people. In this study, we examined the characteristics of the commuting environment for the disabled because they experience many difficulties in the commuting environment owing to the physical influence of the disabled. METHODS : Disabled people are expected to have a higher meaning in commuting satisfaction than commuting time. Therefore, in this study, commuter satisfaction was used as a dependent variable, and an ordered logit model was used because it was composed of a five-point scale. RESULTS : As a result of the analysis, both disabled and non-disabled people were identified as influencing factors in salary, satisfaction with the environment around the residence, work characteristics, and public transportation. The main difference was that disabled people were affected by the household income, length of residence, and commuting area, whereas non-disabled people were affected by the personal income, home ownership, and area of residence. Therefore, it appeared that the household income, stability of residence, and short-distance commuting had a strong influence on the satisfaction of the commuting environment of the disabled.
CONCLUSIONS : This study showed that if we understand the determinants of commuting environment satisfaction and various environmental factors, it is expected that effective policies to improve the employment rate of the disabled can be determined.
PURPOSES : The purpose of this study is to review a method to estimate the average travel speed of the Bus Rapid Transit(BRT) section using the bus departure and arrival time data collected using the Korean bus information system (BIS).
METHODS : To determine an average travel speed estimation model suitable for the BRT system in Korea, the speed estimated using the speed estimation model of TCQSM, which is used in the U.S., and that using the proposed speed estimation model that used the bus departure and arrival time data were compared with the actual travel speed using a t-test.
RESULTS : The average travel speed estimated using the proposed method was more suitable for the actual average travel speed than that estimated using the TCQSM model.
CONCLUSIONS : As a result of estimating the average travel speed, if the length of the link is 900 m, SBRT can be constructed on the existing road, but at least 1,200 m must be ensured to build SBRT in the new city. The proposed bus average travel speed estimation model can be used to review the BRT operational efficiency considering the speed limit, traffic signal, and dwelling time at bus stops in the planning and operation stages of the BRT.
PURPOSES : According to the guidelines of Super Bus Rapid Transit(BRT), dedicated bus roads and dedicated bus lanes shall be used, and physical lane separation facilities should be installed for lane separation. Therefore, physical barriers (lane separation facilities) are being developed for exclusive bus operations. Low-profile lane separation facilities should be developed that do not interfere with the views of pedestrians and drivers. The appropriate heights of the barrier to prevent overriding in the event of passenger car crashes were reviewed.
METHODS : By applying the performance standards of the safety barrier, passenger protection performance according to the change in the height of the lane separation facilities and the vehicle behavior after the crash were analyzed using computer crash simulations. Crash criteria of 1.3 ton-60 km/h-20°and 1.3 ton-80 km/h-20°were used as vehicle impact conditions. The simulation was performed by increasing the height of the lane separation facilities from 200 mm to 500 mm. To prevent the deformation of the lane separation facilities owing to a vehicle crash, the boundary conditions of the node under the lane separation facilities were fixed and modeled.
RESULTS : The collision simulation results showed that, for a collision speed of 60 km/h, no override occurred for the height of the lane separation facility of 250 mm or more, and for a collision speed of 80 km/h, no override occurred for the height of the lane separation facility of 300 mm or more.
CONCLUSIONS : Therefore, the appropriate height of the lane separation facility for the collision of a passenger car with a collision speed of 80 km/h or less was determined to be 300 mm or more.