Powder injection molding (PIM), which combines the advantages of powder metallurgy and plastic injection molding technologies, has become one of the most efficient methods for the net-shape production of both metal and ceramic components. In this work, plasma display panel glass bodies are prepared by the PIM process. After sintering, the hot isostatic pressing (HIP) process is adopted for improving the density and mechanical properties of the PIMed glass bodies. The mechanical and thermal behaviors of the prepared specimens are analyzed through bending tests and dilatometric analysis, respectively. After HIPing, the flexural strength of the prepared glass body reaches up to 92.17 MPa, which is 1.273 and 2.178 times that of the fused glass body and PIMed bodies, respectively. Moreover, a thermal expansion coefficient of 7.816 × 10−6/oC is obtained, which coincides with that of the raw glass powder (7.5-8.0 × 10−6/oC), indicating that the glass body is fully densified after the HIP process.

The sintering mechanisms of nanoscale copper powders have been investigated. A molecular dynamics (MD) simulation with the embedded-atom method (EAM) was employed for these simulations. The dimensional changes for initial-stage sintering such as characteristic lengths, neck growth, and neck angle were calculated to understand the densification behavior of copper nano-powders. Factors affecting sintering such as the temperature, powder size, and crystalline misalignment between adjacent powders have also been studied. These results could provide information of setting the processing cycles and material designs applicable to nano-powders. In addition, it is expected that MD simulation will be a foundation for the multi-scale modeling in sintering process.

Powder injection molding is an important manufacturing technology to mass produce superalloy components with complex shape. Injection molding step is particularly important for realizing a desired shape, which requires much time and efforts finding the optimum process condition. Therefore computer aided engineering can be very useful to find proper injection molding conditions. In this study, we have conducted a finite element method based simulation for the spiral mold test of superalloy feedstock and compared the results with experimental ones. Sensitivity analysis with both of simulation and experiment reveals that the melt temperature of superalloy feedstock is the most important factor for the full filling of mold cavity. The FEM based simulation matches well the experimental results. This study contributes to the optimization of superalloy powder injection molding process.

To compensate for the critical shortage of human organs for allotransplantation, xenotransplantation studies using genetically modified pigs are being performed in Korea. Two types of pigs that are used are α1,3-galactosyltransferase gene knockout (GalT KO) pigs and GalT KO+hCD46 (human complement regulatory protein) pigs. The present study measured the gestation time, birth weight, daily growth rate, and heart weight of both kinds of transgenic minipigs. The gestation period for both types of pigs was 117∼119 days. There was no difference in the body weight of GalT KO (—/+) and GalT KO (—/—) piglets, but GalT KO+hCD46 (—hCD46+/+) pigs were significantly heavier at birth than were GalT KO+hCD46 (—hCD46+/—hCD46+) pigs. During the first 10 weeks of life, the daily weight gain of GalT KO+hCD46 (—hCD46+/—CD46+) piglets, which are considered the optimal type for xenotransplantation, was 0.19 kg. The weight of hearts from GalT KO piglets up to two months of age was affected more by body weight than by age. Transgenic pigs showed no differences in gestation period or reproductive ability compared with normal pigs. These results comprise basic data that may be used in xenotransplantation studies and transgenic animal production in Korea.

This study investigated the densification behavior of rhenium alloys including W-25 wt.%Re and Re-2W-1Ta (pure Re) during sintering. The dilatometry experiments were carried out to obtain the in-situ shrinkage in H2 atmo-sphere. The measured data was analyzed through shrinkage, strain rate and relative density, and then symmetricallytreated to construct the linearized form of master sintering curve (MSC) and MSC as a well-known and straightforwardapproach to describe the densification behavior during sintering. The densification behaviors for each material were ana-lyzed in many respects including apparent activation energy, densification parameter, and densification ratio. MSC witha minimal set of preliminary experiments can make the densification behavior to be characterized and predicted as wellas provide guideline to sinter cycle design. Considering the results of linearized form and MSC, it was confirmed thatthe W-25 wt.%Re compared to Pure Re is more easily densified at the relatively low temperature.

The current standard solutions for somatic cells used for calibration of electronic somatic cell counts as reference material in raw milk are preserved with bronopol, boric acid, sodium azide, or potassium dichromate, and have a shelf-life of only up to 6 days at 4 ± 2℃. In the present study, a set of somatic cell standard solutions (SCSS) with a stability of 5 months for calibration of electronic instruments was developed. Somatic cells collected from cow’s milk and stored in a bulk tank at a dairy plant were treated with 10% formaldehyde in order to improve stability, and then separated by centrifugation. The resulting somatic cell suspension was preserved with glycerin, thimerosal, and dimethyl sulfoxide, and diluted in 3% processed skim milk solution ranging from 200,000～250,000 (low level), 350,000～ 450,000 (medium level), and 550,000～650,000 (high level) cells/㎖. Each SCSS was verified by direct microscope somatic cell counting (DMSCC), C-reader, and commercial standard samples. The average somatic cell count determined by DMSCC was 248, 214, 226 × 103 cells/㎖, 436, 382, 420 × 103 cells/㎖, and 612, 595, 609 × 103 cells/㎖. The coefficient of variation representing the repeatability of DMSCC decreased as the number of cells increased, and was <10.0% in almost all SCSS samples (range 4.6～7.1%). No statistically significant difference in somatic cell concentration was observed after storage at refrigeration temperature (2～6℃) over a period of 22 weeks (5 months). The stabilized SCSS may be useful as a reference material for determination of somatic cell count and quality control in testing of bovine raw milk.

This study was conducted to identify an insect species in Genus Ostrinia (Lepidoptera: Crambidae) that gave serious damage to the red bean, Vigna angularis. The species has ever been described as O. zaguliaevi in the previous presentation (Jung et al., 2010). Because, however, inconsistent information has been recognized for the species, we reviewed characteristics in morphological, molecular and sex pheromone levels, and host-range. Male genitalia had 3-lobed uncus and tibia of midleg showed massive type. The morphology indicated that the species might be one of O. zaguliaevi, O. scapulalis and O. zealis. Partial nucleotide sequences of cytochrome oxidase subunit Ⅰ(COⅠ) and Ⅱ genes were not identical with those of the 3 species in GenBank, respectively. The deduced amino acid sequence of COⅠ was not identical with that of O. zealis. In the 23 analyses that sex pheromones were checked, (Z)-9-tetradecenyl acetate, which was reported in the sex pheromone components of both O. zaguliaevi and O. zealis, was not detected at all. An intensive study in Japan has reported that the feeding habit of O. scapulalis is polyphagous, while that of O. zaguliaevi is monophagous (only in Petasites japonicus) (Ishikawa et al., 1999). After considering all these information, we concluded that it is reasonable to decide that the insect species in the red bean in Korea is O. scapulalis.

원자력연구소 핫셀의 구조와 오염특성이 조사되었다. SEM 측정결과 핫셀 내부에 부착된 고방사능 분진의 크기는 이었다. 사이클론의 최적 Vortex finder의 길이는 49 mm이고, 모의입자 유입속도는 15m/sec가 적합했다. 이때 의 포집효율은 약 85%였다. 모의 입자 유입속도가 15m/sec보다 빠를 때, 포집효율의 증가율은 크지 않았다. 유입가스의 온도가 증가할 때, 포집효율은 약간 감소했다. Vortex finder의 길이가 증가할수록 사이클론내의 압력강하는 커졌다. Cut size diameter는 Reynolds number의 증가와 함께 감소했다. 측정된 Reynolds number에 근거하면, 사이클론 내부는 난류이고 이 난류는 사이클론 내의 압력강하에 원인이 된다고 사료된다. 는 Re 값의 증가와 함께 감소하고, Re의 값이 커질 때에서 일정한 값에 수렴했다. 즉, 6000-8000의 Re에서 는 약 0.045를 나타냈다.

PFC 제염기술은 원자력연구시설 핫셀 내부의 바닥이나 장치표면에 부착된 고방사능분진을 제거하기 위한 방법 중의 하나이다. 고가의 PFC 제염용액을 회수 정제후 재사용하고, 2차폐기물발생을 획기적으로 줄일 수 있는 여과장치를 개발하였다. PFC 매질 내 현탁성 방사성입자를 제거하기 위해 오염특성에 적합한 여과장치를 개발하고 입자제거 성능평가시험을 수행하였다. 개발된 PFC 여과장치는 핫셀 내부로 들어갈 수 있게 알맞은 크기와 무게로 제작되었으며 바퀴와 고리를 부착하여 이동이 용이하다. PFC 여과장치의 성능평가결과 모의입자의 농도 증가 시 flux가 감소하였고, Pre-filter()와 final-filter() 두개를 장착하여 여과시간에 따른 flux의 감소를 개선하였다. 개발된 PFC 여과장치는 분당 약 0.2L의 PFC 폐액을 처리 할 수 있다.

원자력연구시설의 핫셀 내 바닥이나 장치표면에 부착된 고방사능분진의 제거를 위해서 PFC제염기술을 적용한다. 고가인 PFC 용액의 재사용을 위해서는 여과장치의 개발이 필요하고 제염종료 후 이차폐기물의 양을 최소화할 필요가 있다. PFC 제염폐액 내 방사성 입자를 제거하기 위해 핫셀 내의 고방사능분진의 오염 특성을 조사했다. 여과 막을 이용한 입자의 제거효율 측면에서 보면 세라믹 , PVDF, PP 막 모두가 95 이상의 높은 여과 성능을 보였다. 기공 크기가 같은 동일 여과 막에서는 입자가 크거나 가하는 압력이 높을수록 좀더 높은 제거효율을 나타내었고, 3psi이하에서는 PVDF의 제거효율이 다른 막에 비해 작게 나타났다. 플럭스 성능은 PVDF 막이 가장 높은 수준을 나타냈고 세라믹과 PP 막에서는 다소 낮은 성능을 보였다. PVDF 막은 낮은 압력과 짧은 여과시간으로 최대(한계)플럭스에 도달함을 확인하였다. 세라믹 막은 모의입자의 제거 효율은 높지만 다소 낮은 Flux 성능을 나타냈다. 또한, 막 자체의 비싼 가격과 쉽게 부서지는 성질의 단점을 지니고 있지만 무기화합물의 재질로 되어있기 때문에 알파방사능 환경에서 H, 가스를 발생하는 고분자 막인 PVDF, PP 막과 비교하여 훨씬 안정적이었다. 그리고 이들 소수성 여과막들의 특성 비교를 바탕으로 세라믹 막을 적용한 PFC 실증 여과장치의 공정도를 살펴보았다.

최근 다엽콜리메이터를 부착한 선형가속기를 이용한 방사선수술의 빈도가 점차 높아지고 있다. 이러한 정교한 방사선 수술은 소조사면 내에 고선량의 방사선이 집중적으로 조사되기 때문에 체계적이고 정확한 정도관리가 필수적이다. 본 연구는 PIB(Particle in Binder) 방식 중 침전법을 이용하여 400 ㎛ 두께의 요오드화납(PbI2)과 요오드화수은(HgI2) 광도전체 센서 시편를 제작하였다. 제작된 시편의 전기적 특성은 암전류, 출력전류, 응답특성 및 선형성을 평가하였다. 평가 결과, HgI2 가 우수한 신호발생량과 선형성을 보였다. 끝으로, 두께에 따른 HgI2 센서의 신호반응 특성 결과, 400 ㎛ 두께에서 신호발생효율이 가장 높았고, ±2.5 % 이내의 우수한 재현성을 보였다.