Charcoal canisters are broadly used for radon detection because of their handiness and short sampling period. Radon detection using charcoal canisters are known to be susceptible to surrounding conditions such as temperature and humidity. Public radon inspectors cannot handle extreme temperature, and the relative humidity can differ in districts due to the use of different types of construction. Thus, if relative humidity can be controlled at the entrance of a charcoal canister, radon inspectors will be able to procure more reliable data. The purpose of this study was to assess the efficiency of existing filters in a charcoal canister and to apply a new type of filter (Super Absorbent Polymers, SAP) that can control the moisture penetrating into the charcoal canister. Based on adequate case studies using the new filter, radon data have shown over 98% close to the reference data irrespective of varying moisture levels. Meanwhile, basic filters showed 88% similarity compared to the reference data, which means that charcoal canisters were affected by moisture. The SAP filter is reasonably inexpensive and once it turns into its gel shape (which, in turn, is saturated by moisture), it can be easily replaced. This filter will not only be able to provide more accurate radon data, but also apply to other gas phase material detections that are sensitive to moisture in the air.

본 실험에서는 조류 제거 및 농축을 위해 Silicon Carbide(SiC) 재질의 침지형 세라믹막을 적용하여 운전 특성을 평가하고자 하였다. SiC 세라믹막은 막표면이 음전하를 띄어 음전하를 띄는 조류 제거에 적용이 가능하고 고유량으로 역세척(Backwashing)을 할 수 있어 고농도의 조류 농축시에도 적용이 가능하다. 역세척 유량과 역세척 시간, 역세척수 수온, 역세척수에 차아염소산나트륨 주입 유무, 여과/역세시 air scrubbing 유량에 따라 역세척 효율을 평가하였으며 Jar test를 통해 선정한 농도로 응집제 주입 유무에 따라 운전 특성을 비교하였다. 또한 동일한 조건에서 세라믹막과 유기막의 운전 특성과 비교하였다. 본 연구는 환경부의 “환경정책기반공공기술개발사업”으로 지원받은 과제입니다.

본 실험에서는 대청호에서 발생한 남조류를 대상으로 SiC(Silicon carbide) 평막의 최적 운전조건을 도출하고자 하였다. 이를 위해 원수 농도에 따른 투과플럭스, 응집제 주입 조건, Air scrubbing 조건, 역세척(Backwashing) 유량 및 시간, 여과 및 역세척 시간, 응집제 종류 및 주입 농도 등에 대해 안정적으로 운전이 가능한 최적 조건을 도출하였다. 특히, 저농도의 응집제 주입에도 음전하를 띄는 조류 입자들과 전기적으로 중화를 일으켜서 생성된 미세 플럭들이 SiC 평막의 막표면에서 투수성을 증가시킨 것으로 사료된다. 이를 통해 도출된 설계인자로 제작한 Pilot Plant를 조류 제거시 적용하고자 한다. 본 연구는 환경부의 “환경정책기반공공기술개발사업”으로 지원받은 과제입니다.

In this study, we investigated the dynamic stability of the system and the semi-analytical solution of the shallow arch. The governing equation for the primary symmetric mode of the arch under external load was derived and expressed simply by using parameters. The semi-analytical solution of the equation was obtained using the Taylor series and the stability of the system for the constant load was analyzed. As a result, we can classify equilibrium points by root of equilibrium equation, and classified stable, asymptotical stable and unstable resigns of equilibrium path. We observed stable points and attractors that appeared differently depending on the shape parameter h, and we can see the points where dynamic buckling occurs. Dynamic buckling of arches with initial condition did not occur in low shape parameter, and sensitive range of critical boundary was observed in low damping constants.

기계에 대한 새로운 학습 방법의 등장과 함께 기계학습을 이용한 영상 인식에 대한 관심이 높다. 스마트 기기를 이용한 영상 획득이 활발해지면서, 촬영한 영상 속 생물 개체의 이름을 자동으로 알려 주는 기계학습 기반의 영상인식 기술은 대중적인 호기심을 충족시킬 뿐 아니라 생물학 및 영상인식 연구자들에게도 매력적인 주제이다. 본 발표에서는 15종의 나비 영상으로부터 나비의 형태(shape) 및 색깔과 같은 영상정보를 개체 인식에 이용하는 기계학습 기반의 나비인식 방법을 소개 한다. 우선 나비의 형태나 색깔로부터 각 종을 대표해 기계의 학습 데이터로 사용될 특징(feature) 추출을 위한 몇 가지 방법들에 대해 알아본다. 그리고 추출된 특징들을 학습 데이터로 이용해 세 가지 대표적인 기계학습 방법(베이지안 분류기, 인공신경망, 서포트 벡터 머신)을 학습시키는 방법 및 테스트 데이터를 이용한 성능평가 방법을 소개한다.

The objective of this study was to investigate design factors of the electrolysis reactor through the CFD(computational fluid dynamics) simulation technique. Analyses of velocity vector, streamline, chloride ion concentration distribution showed differences in flow characteristics between the plate type electrode and the porous plate type electrode. In case of the porous plate type electrode, chlorine gas bubbles generated from the anode made upward density flow with relatively constant velocity vectors. Electrolysis effect was more expected with the porous plate type electrode from the distribution of chloride ion concentration. The upper part of the electrolysis reactor with the porous plate type electrode had comparatively low chloride concentration because chloride was converted to the chlorine gas formation. Decreasing the size and increasing total area of rectifying holes in the upper part of cathodes, and widening the area of the rectifying holes in the lower part of cathodes could improve the circulation flow and the efficiency of electrolysis reactor.

Middle size of membrane retractable roof is under 25m span which consists of various moving systems. Trolley is the system that leads the membrane to parking place, transferring the load from the membrane to structural cable. When membrane closes roof completely, thus, structural behavior of trolley, which may contain various material with different friction coefficients, should be investigated by vertical load. Nummerical simulation of trolley prototypes, in this research, was performed by incrementation of vertical load. Consequently, this paper studied proper friction characteristics and provided the effective inner materials of trolley.

Building hardware joints are welded in most cases, which have risks of fire and explosion. Besides, the secondary damage of the destruction of the welded parts can be caused by the horizontal displacement of the structure due to earthquake or wind load. This paper compared the horizontal displacement following abilities of welded building hardware and non-welded building hardware. To do this, We conducted actual formation shake table test, and checked on the horizontal displacement following ability of structure by comparing their responses to earthquake load. We made the 2m-high framework to examine the responses of the actually constructed building hardwares, and analyzed the displacement responses of the welded-typed, non-welded-typed, and cruciform bracket building hardwares. We conducted the test by increasing acceleration rate until displacement reached 40mm corresponding to allowable relative story displacement II. The result of the test showed that the building hardware using welding work made cracking and breakage on welded connections of welded building hardware, but non-welded building hardware with no use of welding work and cruciform bracket building hardware make no problem, and that non-welded building hardware is superior to that of the welded building hardware in the horizontal displacement following ability due to earthquake or wind load.

Membrane structure is a system that is stabilized by maintaining a tensile state of the membrane material that originally cannot resist the bending or pressure. Also, it is a system that allows the whole membrane structure to bear external loads caused by wind or precipitation such as snow, rain and etc. Tension relaxation phenomenon can transpire to the tension that is introduced to the fabric over time, due to the innate characteristics of the membrane material. Thus, it is important to accurately understand the size of the membrane tension after the completion of the structures, for maintenance and management purposes. The authors have proposed the principle of theoretically and indirectly measuring the tension by vibrating the membrane surface with sound waves exposures against the surface, which is compartmentalized by a rectangular boundary, and by measuring the natural frequency of the membrane surface that selectively resonates. The authors of this paper measured the tension of preexisting membrane structure for its maintenance by using the developed portable measurement equipment. Through analyzing the measurement data, the authors review the points that should be improved and the technical method for the new maintenance system of membrane tension.

Cap decks used in slim floor system for reducing floor height act as molds for forming floor slabs in structures with a span of up to 6m without temporary supports. When deep decks are employed in a structure with a span of more than 6m, the problem of defection occurs. This study suggests placing tendons at the ends of cap decks in order to create cambers and control defection when preload is applied. Uniformly distributed load was applied by an UTM to the two L/4 points of specimens to observe the deflection of preloaded cap decks. For the test, three 7.5m specimens were fabricated. One of them was a plain cap deck specimen and the others were those with tendons (PC strands or steel bars.

In this study, an acceleration sensor that has optical fibers to measure the inclination and acceleration of a structure through contradictory changes in two-component FBG sensors was examined. The proposed method was to ensure precise measurement through the unification of the deformation rate sensor and the angular displacement sensor. A high sensitivity three-axis accelerometer was designed and prepared using this method. To verify the accuracy of the accelerometer, the change in wavelength according to temperature and tension was tested. Then, the change in wavelength of the prepared accelerometer according to the sensor angle, and that of the sensor according to the change in ambient temperature were measured. According to the test results on the FBG-based vibration sensor that was developed using a high-speed vibrator, the range in measurement was 0.7 g or more, wavelength sensitivity, 2150 pm/g or more, and the change in wavelength change, 9.5 pm/℃.

Solar power is being spotlighted recently as a new energy source due to environmental problems and applications of solar power to curved structures are increasing. Solar panels installed on curved surfaces have different efficiencies depending on its position and the efficient positioning of solar panels plays a critical role in the design of solar power generation systems. In this study, the changing characteristics of solar irradiance were analyzed for hemispherical dome with a large curvature and the positioning of solar panels that can efficiently utilize solar energy was investigated. With an icosahedron-based hemispherical dome consisting of triangular elements as target model, a program for calculating solar irradiance using a normal vector of the solar module on each face was developed. Furthermore, the change of solar irradiance according to the sun’s path was analyzed by time and season, and its effects on shades were also examined. From the analysis results, the effective positioning could be determined on the basis of the efficiency of the solar panels installed on the dome surfaces on solar irradiance.

A single-layerd steel lattice roof, which has 50m span, was constructed. In order to figure out the realistic buckling load level, the structural analysis of this roof structure was performed especially by local snow load. Due to the characteristics of application of snow load, the load combinations of snow should be considered not only global area but also local part so that the critical buckling load could be observed as easy as possible. Geometrical imperfection was simulated to consider inaccurate shape of structure. And then nonlinear analysis were performed. Finally, this paper could investigate that the local snow load with geometrical imperfection decreased the level of buckling load significantly.