최근 기후변화 등으로 인한 꿀벌의 폐사가 증가하고 있으나 관련 데이터가 부족하여 이에 대한 연구가 어려움 을 겪고 있어 학습용 인공지능 데이터를 구축하여 양봉 산업 발전에 기여하고자 한다. 학습용 데이터로 생애주기 별 5단계(알, 애벌레, 번데기, 숫벌, 여왕벌), 종봉별 4가지(이탈리안, 카니올란, 한봉, 호박벌), 발생질병 1종(백묵 병) 총 10가지 클래스를 데이터 수집장소 6곳(장성, 포천, 칠곡, 완주, 의령, 장흥)에서 학습용 데이터를 274,206장 구축하였다. 수집된 데이터는 원시데이터, 원천데이터 가공, 라벨링 데이터 결합, 가공데이터 검수 등을 통해 만들어졌으며 관측지에서 온습도, CO, CH4, NH3 등 환경데이터를 200,000건 확보하여 데이터 라벨링을 수행하 였다. 데이터는 AI Hub(www.aihub.or.kr)에서 다운받을 수 있다. 확보된 데이터는 꿀벌의 생애 단계별, 종별, 건강 상태별 이미지 데이터로 구성되어 있어 양봉 관리 자동화, 꿀벌 질병 예측, 양봉 기술 개발 및 연구 등 다양한 분야에 활용될 수 있을 것으로 예상된다.

식용곤충은 미래식량 자원으로써 우수한 가치를 지니고 있어 해외에서는 사육자동화, IoT 및 AI 기술적용, 수직재배시스템 구축 등 많은 연구가 진행되고 있지만 국내에서는 대규모 사육농가나 곤충스마트팜 기술개발 이 부족하여 이를 위한 AI/빅데이터 인프라 구축이 시급한 실정이다. 학습용 인공지능 데이터는 식용곤충으로 활용되고 있는 장수풍뎅이, 흰점박이꽃무지, 갈색거저리, 백강잠, 메뚜기, 풀무치의 생애 주기별 총 6종의 RGB 사진데이터와 분광이미지 데이터 408,000장을 구축하였으며 온도, 습도, CO,, 암모니아, 조도, 수분 등 환경 데이 터 200,000세트를 수집하였다. 수집된 데이터는 원시데이터 수집, 원천데이터 가공, 라벨링 데이터 결합, 가공데 이터 검수 등을 통해 만들어졌으며 관련 데이터는 AI Hub(www.aihub.or.kr)에서 다운받을 수 있다. 확보된 식용곤 충 6종의 데이터는 곤충 종별 성장단계, 환경 변수에 따른 최적의 사육환경 조성, 생산시기 예측, 스마트대량사육 시스템 개발, 제품 가공시 추적이력제 도입, 식용곤충 스마트팜 기술 개발 및 연구 등 다양한 분야에 활용될 수 있을 것으로 예상된다.

To control western flower thrips (Frankliniella occidentalis), a significant pest of peppers, the control effects of eco-friendly agricultural materials were tested when treated alone and in combination. The control effects of yellow sticky roll traps installed on the stem, predatory natural enemy (Hypoaspis miles) inoculated on the stem, and plant extracts (50% custard apple seed oil + 10% cinnamon extract) sprayed on the foliage were 45.3%, 36.6%, and 50.2%, respectively, when treated individually. Meanwhile, when three eco-friendly agricultural materials were comprehensively applied, the control effect was maintained between 62.4% and 80.9% compared to untreated conditions during the pepper harvesting season. These methods can be utilized for the eco-friendly control of western flower thrips in pepper greenhouses.

Subgenus Bothynoptera Schaum, 1863 of the genus Parena is mainly found in Oriental region. Despite this widespread distribution, species of the subgenus Bothynoptera are poorly known in Korea. While a total of 14 species have been recorded worldwide, only 3 species have been recorded in Korea. In this study, as a revisional work of Korean known species, a pictorial key and photographs of habitus and male genitalia for each species are provided, with a newly recorded species in Korea.

Currently, 12 subspecies of Coptolabrus smaragdinus have been recorded in Korea, of which 7 subspecies are listed in South Korea. C. smaragdinus has limited movement due to degenerated hindwings, resulting in high intraspecific diversity due to geographic isolation. Previous studies have been mainly classified based on external characters or genitalia structure, but the differences between subspecies are very ambiguous. In this study, we aimed to more clearly distinguish at the subspecific classification level, by examining the male aedeagal and inflated endophallus. Additionally, we provide photos of adult, endophallus and the process of endophallus inflation.

The genus Bembidion is a prominent terrestrial group found in various regions around the world, encompassing a large number of species. Species of this genus have a reduced apical palpomere, as do all members of the tribe Bembidiini. This study reviews four species belonging to the subgenus Plataphus, which is included within the genus Bembidion. Descriptions and photos of adults are provided.

The continuous use of pesticides with the same mode of action has lead to the development of insecticide resistance in the target pests. Establishing pesticide resistance management methods and effective control strategies for these pests has become an important target. Bemisia tabaci, a representative pest of greenhouse, directly affects the growth of crops at all stages of its development except eggs. It also causes indirect damage by secreting honeydew that eventually promotes sooty mold in leaves and fruits. In this study, eight insecticides with different mechanisms of action (Flonicamid, Fluxametamide, Spinetoram, Cyantraniliprole, Dinotefuran, Pyridaben, Milbemectin and Pyriproxyfen), and registered for use against cucumber B. tabaci were selected and tested for insecticide resistance. The tested populations of B. tabaci were collected from greenhouse cucumber cultivations in 12 domestic regions. The results were presented as RR (Resistance ratios), and CEI (Control efficacy index) values.

Since rice is the main food in Korea, there are no regulations on corn milling yet. Corn is known as one of the world's top three food crops along with wheat and rice, and it is known that 3.5 billion people worldwide use corn for food. In addition, corn mills are not developed or sold in Korea, but the use of corn mills is increasing significantly in many countries in Southeast Asia. In the Philippines, as Korea's rice mill import increases, Korea's KAMICO (Korea Agricultural Machinery Industry Cooperative) and domestic company A agreed to develop a corn mill jointly with PHilMech, an organization affiliated with the Philippine Ministry of Agriculture. However, research on corn milling was very insignificant, so the development was carried out based on the technology of Korea's rice mill. Rice milling is performed by peeling off the skin of rice and producing brown or white rice, so it is carried out by removing the skin and cutting the skin. On the other hand, in the corn mill, the skin of the corn is peeled, pulverized and selected to produce main products suitable for edible use. Therefore, in order to develop a corn mill, processes such as peeling, transfer, grinding, sorting, and by-product separation are required, and suitable parts must be developed. In addition, the performance must be gradually improved through experiments in which corn is repeatedly milled. The Philippines produces 7.98 million tons/year of corn, which is about 100 times that of Korea, and is mostly consumed as a staple food. This is about 10% of the total crop production in the Philippines. In addition, the main cultivation complexes of corn are the mountainous regions of Tarlac or Pangasinan, and the produced corn is 72.4% of the so-called yellow corn called Arabel and Sarangani, and the remaining 27.6% are known as white corn. In this study, it was intended to produce grains of 2.5 mm or less suitable for food for yellow corn and to develop a corn mill for 200 kg per hour. Detailed conditions for development are stipulated as more than 55% of the main product recovery rate, more than 31% of the by-product recovery rate, less than 5% of the raw material loss rate, and more than 80% of the embryo dislocation rate. In this study, to achieve this, the overall process of the corn mill was developed, and the optimal conditions for the corn mill were obtained through the development of parts and empirical tests to improve performance. In addition, it was intended to achieve the development goal by evaluating and analyzing the performance of each part so that it did not conflict.

The initial development plans for the six reactor designs, soon after the release of Generation IV International Forum (GIF) TRM in 2002, were characterized by high ambition [1]. Specifically, the sodium-cooled fast reactor (SFR) and very-high temperature reactor (VHTR) gained significant attention and were expected to reach the validation stage by the 2020s, with commercial viability projected for the 2030s. However, these projections have been unrealized because of various factors. The development of reactor designs by the GIF was supposed to be influenced by events such as the 2008 global financial crisis, 2011 Fukushima accident [2, 3], discovery of extensive shale oil reserves in the United States, and overly ambitious technological targets. Consequently, the momentum for VHTR development reduced significantly. In this context, the aims of this study were to compare and analyze the development progress of the six Gen IV reactor designs over the past 20 years, based on the GIF roadmaps published in 2002 and 2014. The primary focus was to examine the prospects for the reactor designs in relation to spent nuclear fuel burning in conjunction with small modular reactor (SMR), including molten salt reactor (MSR), which is expected to have spent nuclear fuel management potential.

Hypertension is characterized by excessive renin-angiotensin system activity, leading to blood vessel constriction. Several synthetic compounds have been developed to inhibit renin and angiotensin-converting enzyme (ACE). These drugs often have adverse side effects, driving the exploration of plant protein-derived peptides as alternative or supplementary treatments. This study assessed the phenolic compound and amino acid content and the antioxidant and antihypertensive activity of 5 South Korean staple crops. Sorghum had the highest phenolic compound content and exhibited the highest antioxidant activity. Millet grains, particularly finger millet (38.86%), showed higher antihypertensive activity than red beans (14.42%) and sorghum (17.16%). Finger millet was found to contain a large proportion of branched-chain, aromatic, and sulfur-containing amino acids, which are associated with ACE inhibition. In particular, cysteine content was positively correlated with ACE inhibition in the crops tested (r=0.696, p<0.01). This study confirmed that the amino acid composition was more correlated with the antihypertensive activity of grains than the phenolic compound content. Finger millet mainly contained amino acids, which have higher ACE inhibitory activity, resulting in the strongest antihypertensive activity. These findings underscore the antihypertensive potential of select crops as plant-based food ingredients, offering insight into their biological functions.

KORAD (Korea Radioactive Waste Agency, http://www.korad.or.kr) has stored slightly contaminated ascon (asphalt coated concrete mixture) that was introduced to Gyeongju repository about a decade ago waiting for a final disposal. It is believed to be mainly contaminated by radioisotope 137Cs due to impurities introduced from the outside during the ascon manufacturing process. We studied characteristics of the radioactive waste to see whether this material would be proper enough to be disposed in Gyeongju LILW repository or be other ways to reduce the disposal volume including self-disposal before its final disposal otherwise. KORAD looked into the properness of characteristics of ascon in terms of WAC (Waste Acceptance Criteria) documented by KORAD that includes general chemical and physical properties of asphalt, density, size of grains, content of organic material and possibility of existence of chelate materials that qualitatively limited to be disposed by the criteria. And other associated characteristics such as gas generation and bio degradation were also investigated. Based on the data obtained from the study, we proposed various plausible solutions in associated with operational and disposal safety and economic view points. This study will be used for KORAD’s decision on how to control and safely dispose the spent ascon within a reasonable time period. And also those experiences may be applied for other LILW issues that require treatment or conditioning of radioactive wastes in the future.

Radionuclides in low- and intermediate-level radioactive wastes from the decommissioning process of nuclear power plants were generally immobilized by cementation methods. Ethylenediaminetetraacetic acid (EDTA), which is extensively used as a decontamination agent, can affect the behaviors of radionuclides immobilized in cement waste forms. In this study, the effects of EDTA contained in simulated radioactive decommissioning wastes on the leaching characteristics of immobilized Co and Cs and the microstructure evolution of cement waste form. Co leaching was accelerated by the formation of Co–EDTA complexes with high mobility and solubility. Cs leaching was hindered by the ion competition with other metal–EDTA complexes for releasing from the cement waste form. Cs leaching was also retarded by carbonated layer at edge of the cement waste form, which process is facilitated by the presence of EDTA. Finally, the effects of EDTA on the leaching characteristics of immobilized Cs and Co and the microstructure evolution of the cement waste form should be considered to ensure the safety of disposal for lowand intermediate-level radioactive wastes.

Natural analogue studies aim to understand specific processes or to make predictions regrading formation processes or environmental conditions based on information from natural phenomena on Earth. Studying geological environments similar to the disposal system can help evaluate the longterm stability of the disposal system. These studies play a crucial role in evaluating the long-term stability of deep geological repositories (DGRs) for high-level radioactive wastes, which must remain stable for extended periods. In particular, bentonite, as a vital buffer material in DGRs, is mainly composed of montmorillonite and undergoes a transformation into zeolite under specific environmental conditions, resulting in the loss of its role as a buffer material in terms of swelling property and hydraulic conductivity. In this study, bentonite samples from Pohang Basin in Korea were investigated, revealing the presence of montmorillonite and zeolite in both outcrop and drilling core samples. While it has been known that montmorillonite and zeolites can form from volcanic glass through diagenesis or hydrothermal alteration, this study revealed that these minerals are formed under distinct environmental conditions. The outcrop samples primarily consisted of montmorillonite with minor quantities of cristobalite and amorphous silicate minerals. In contrast, the drilling core samples were composed of montmorillonite, zeolites, quartz and feldspar, indicating different mineral assemblages and characteristics between the outcrop and drilling samples. This observation suggests different environmental conditions during the mineral formation process. Therefore, various experiments and analytical methods were employed to gain a deeper understanding of the phase transformation from montmorillonite to zeolites under diverse environmental conditions

The solid-state chemistry of uranium is essential to the nuclear fuel cycle. Uranyl nitrate is a key compound that is produced at various stages of the nuclear fuel cycle, both in front-end and backend cycles. It is typically formed by dissolving spent nuclear fuel in nitric acid or through a wet conversion process for the preparation of UF6. Additionally, uranium oxides are a primary consideration in the nuclear fuel cycle because they are the most commonly used nuclear fuel in commercial nuclear reactors. Therefore, it is crucial to understand the oxidation and thermal behavior of uranium oxides and uranyl nitrates. Under the ‘2023 Nuclear Global Researcher Training Program for the Back-end Nuclear Fuel Cycle,’ supported by KONICOF, several experiments were conducted at IMRAM (Institute of Multidisciplinary Research for Advanced Materials) at Tohoku University. First, the recovery ratio of uranium was analyzed during the synthesis of uranyl nitrate by dissolving the actual radioisotope, U3O8, in a nitric acid solution. Second, thermogravimetric-differential thermal analysis (TG-DTA) of uranyl nitrate (UO2(NO3)2) and hyper-stoichiometric uranium dioxide (UO2+X) was performed. The enthalpy change was discussed to confirm the mechanism of thermal decomposition of uranyl nitrate under heating conditions and to determine the chemical hydrate form of uranyl nitrate. In the case of UO2+X, the value of ‘x’ was determined through the calculation of weight change data, and the initial form was verified using the phase diagram for the U-O system. Finally, the formation of a few UO2+X compounds was observed with heat treatment of uranyl nitrate and uranium dioxide at different temperature intervals (450°C-600°C). As a result of these studies, a deeper understanding of the thermal and chemical behavior of uranium compounds was achieved. This knowledge is vital for improving the efficiency and safety of nuclear fuel cycle processes and contributes to advancements in nuclear science and technology.

One of cosmopolitan pest, Agrotis ipsilon, causes serious economic damages in horticultural crops. This study compared the host fitness of A. ipsilon among nine major horticultural crops in Korea. Among the nine crops, the population of A. ipsilon failed to complete its development in spinach, cucumber, melon, and kidney bean. The host effects on development and reproduction of A. ipsilon were further investigated in the remained five crops. Host plants significantly (P < 0.05) affected the development-related factors of A. ipsilon eggs, larvae, and pupae. They also affected the adult reproduction-related factors including preoviposition period, oviposition period and number, and longevity except for the prepupa stage. A positive relationship was found be tween biological factors. Among the nine crops in this study, napa cabbage showed the highest suitability for the A. ipsilon populations. These findings in this study would be helpful to understand the ecology and develop the man agement tactics of A. ipsilon in horticultural crops.

The rate of resistant pest emergence has accelerated due to the continuous use of pesticides. Therefore, it is important to formulate insecticide resistance management measures and effective control methods for pest. Bemisia tabaci, a greenhouse pest, causes direct damage to crops such as growth inhibition and leaf discoloration at all developmental stages except for eggs. It also indirectly damages plants by secreting honeydew, which covers surrounding leaves and fruits, leading to sooty mold development. In this study, eight insecticides with high usage rates, categorized by their mode of action, were selected. Samples of Bemisia tabaci were collected from six regions, and resistance analysis were conducted. The results showed that Flonicamid exhibited a resistance ratio of 8.91 in Sejong, while Pyriproxyfen showed a high resistance ratio of 63.56 in Gunwi. Fluxametamide, Spinetoram, Cyantraniliprole, Dinotefuran, Pyridaben, and Milbemectin displayed resistance ratio ranging from 0.02 to 1.14 in most regions, except for Flonicamid and Pyriproxyfen.