Steel slag has been used as the alternative binder to replace Portland cement that furthermore used as in construction and/or for stabilization/solidification of heavy metals in mine soil. One of the treatments to modify the leaching behavior of the mine soil is by carbonation. The purpose of this study was to assess the potential of carbonation in various steel slags. Based on chemical and mineralogical characterization of four kinds of slag that were used in this study, it showed that all slags had high potential for reacting with CO2 that was in accordance with the high CaO and MgO content. CO2 sequestration by aqueous carbonation of several kinds of stainless steel slags with different liquid to solid ratio was investigated in this study. The effect of chemical properties and reaction time on the performance of the carbonation process was also investigated. Converter slag, blast furnace slag (BFS) and ladle furnace slag (LFS) were used. Carbonation experiment was conducted in a closed reactor under the conditions; 1bar, 400rpm and 25℃, with solid to liquid ratios of 0.4, 0.6 and 1.0. Carbonation kinetic test was relatively fast and completed within 5 hours. The CO2 consumption increased when the liquid to solid ratio increased because of the dilution effect. Our results showed that the higher CaO and MgO contents in the slag, the higher CO2 consumption was observed. Pohang converter slag and Dangjin LFS showed slightly different tendency. At L/S ratio 0.4, Pohang slag with higher CaO and MgO content had higher CO2 consumption than Dangjin LFS. As the water content increased, Dangjin LFS had higher CO2 consumption than Pohang converter slag that was caused by the texture of Dangjin LFS with smaller particle size than Pohang converter slag. However, both Pohang BFS and Dangjin BFS have poor capacity in CO2 sequestration.