This study examined the effects of freshwater discharge by artificial dikes from the Kanwol and Bunam lakes on the dynamics in the Chunsu Bay, Yellow Sea, Korea, during the summer season based on three-dimensional numerical modeling experiments. Model performances were evaluated in terms of skill scores for tidal elevation, velocity, temperature, and salinity and these scores mostly exceeded 90 %. The variability in residual currents before and after the freshwater discharge was examined. The large amount of lake water discharge through artificial dikes may result in a dramatically changed density field in the Chunsu Bay, leading to an estuarine circulation system. The density-driven current formed as a result of the freshwater inflow through the artificial dikes (Kanwol/Bunam) caused a partial change in the tidal circulation and a change in the scale and location of paired residual eddies. The stratification formed by strengthened static stability following the freshwater discharge led to a dramatic increase in the Richardson number and lasted for a few weeks. The strong stratification suppressed the vertical flux and inhibited surface aerated water mixing with bottom water. This phenomenon would have direct and indirect impacts on the marine environment such as hypoxia/anoxia formation at the bottom.

In this study, the PHYTO-PAM-fluorometric method was used to evaluate the ETRmax in terms of sensitivity to DIN/DIP against 14 microalgae: Prorocentrum micans, Heterocapsa triquetra, Gymnodinium impudicum, Gymnodinium catenatum, Amphidinium caterae, Chlorella vulgaris, Chroococcus minutus, Microcystis aeruginosa, Chlorella ellipsoidea, Nannochloris oculata, Oocystis lacustris, Chroomonas salina, Gloeocystis gigas, and Prymnessium parvum. We found that P. micans, H. triquetra, and A. caterae exposed to the maximum level of DIN/DIP were significantly smaller in the ETRmax than that of the minimum and moderate mixture. Unlikely the ETRmax, the initial slope alpha was not significantly different at the level of 60 DIN/DIP. In G. catenatum, the moderate levels of 15 and 20 in DIN/DIP were found to be significantly different from the ETRmax at Ch1-Ch4. Gymnodinium impudicum had a higher value than that of the ETRmax than that of dinoflagellates used in this study, ranging from 306.1 (Ch4, DIN/DIP: 10) to 520.1 (Ch4, DIN/DIP: 30). The ETRmax value obtained from other microalgae was similar to G. impudicum at any of the ratios of DIN/DIP and channels. Consequently, the influence of offshore water current assures us of the suppression of photosynthesis and electron transport rate in dinoflagellates. Gymnodinium impudicum has not been researched in the area of red tides in Korea, but it will be enough to creat the massive algal blooms in the future because of higher potential photochemical availability.

The purpose is to study the identification method of Huangjinju powder for injection and the medicinal materials by the fingerprint off-ray Diffraction Fourier (XRDF). We used the same method on both the studying of Huangjinju and the medicinal materials. Then we selected a few components alignment to compare. We analyzed the data by setting up the deviation d(a) as ±0.05 to calculate the rate of special mark on the sample (Px) and on the patent (P). The special XRDF of Huangjinju[d(a)/(I/I0)] have 5 peaks that have not expressed in medicinal materials. Therefore Px is 22.73%. Flos Trollii Chinensis has 3 special marks and Px is 17.65%. Flos Chrysanthemi Indici has 1 special mark and Px is 3.57%. Its coincided interplanar spacing with the patent is 2.907a. Flos Lonicerae Japonicae has 6 special marks and Px is 23.08%. Its special mark in the patent are 4.95/14 and 4.50/15, respectively. The P is 9.09%. Its coincided interplanar spacing with the patent is 2.910a and 3.05a, respectively. The number of special XRDF mark peaks of baicalin is 9 and Px is 18.37%. Its coincided interplanar spacing with the patent is 2.910a. It has visible mark and specificity adopting XRDF fingerprint to identify Huangjinju and medicinal materials. Establishing the quality standard is a synthetic index that depends both on special marks in the medicinal materials of the patent and on the coincidence peak data.