A new annual dose evaluation system called E-DOSE has been developed. The system is based on the methodology of the previous version, K-DOSE60, which uses the dose evaluation methods of the International Commission on Radiological Protection (ICRP-60). However, E-DOSE is coded in ABAP to be compatible with the KHNP’s enterprise resource planning (ERP) system, SAP. This allows E-DOSE to use the real-time data from SAP, which minimizes the need for user intervention. The socio-environmental data, which was previously managed by the staff of each plant sites, can now managed in the system in a centralized manner. This is a significant improvement over the previous system, as it reduces the risk of errors and makes it easier to track and manage data. The system also automatically generates the reports required by regulations. EDOSE is expected to minimize the occurrence of human errors in preparing and managing the input data. This is because the system uses the data from SAP, which is less prone to errors than manually entered data. Additionally, the automatic generation of reports reduces the risk of errors in report preparation. E-DOSE is also expected to improve work efficiency. This is because the system automates many of the tasks involved in annual dose evaluation, such as data entry, calculation, and report generation. Overall, E-DOSE is a significant improvement over the previous annual dose evaluation system. It is more efficient, accurate, and user-friendly.

The domestic Pressurized Heavy Water Reactor (PWHR) nuclear power plant, Wolsong Unit 1, was permanently shut down on December 24, 2019. However, research on decommissioning has mainly focused on Pressurized Water Reactors (PWRs), with a notable absence of both domestic and international experience in the decommissioning of PHWRs. If proper business management such as radiation safety and waste is not performed, it can lead to increased business risks and costs in decommissioning. Therefore, the assessment of waste volume and cost, which provide fundamental data for the nuclear decommissioning process, is a crucial technical requirement before initiating the actual decommissioning of Wolsong Unit 1. Decommissioning radiation-contaminated structures and facilities presents significant challenges due to high radiation levels, making it difficult for workers to access these areas. Therefore, technology development should precede decommissioning process assessments and safety evaluations, facilitating the derivation of optimal decommissioning procedures and ensuring worker safety while enhancing the efficiency of decommissioning operations. In this study, we have developed a program to estimate decommissioning waste amounts for PHWRs, building upon prior research on PWR decommissioning projects while accounting for the specific design characteristics of PHWRs. To evaluate the amount of radioactive waste generated during decommissioning, we considered the characteristics of radioactive waste, disposal methods, packaging container specifications, and the criteria for the transfer of radioactive waste to disposal operators. Based on the derived algorithm, we conducted a detailed design and implemented the program. The proposed program is based on 3D modeling of the decommissioning components and the calculation of the Work Difficulty Factor (WDF), which is used to determine the time weighting factors for each task. Program users can select the cutting and packaging conditions for decommissioning components, estimate waste amount based on the chosen decommissioning method, and calculate costs using time weighting factors. It can be applied not only to PHWRs, but also to PWRs and non-nuclear fields, providing a flexible tool for optimizing decommissioning process.

With the aging of nuclear power plants (NPPs) in 37 countries around the world, 207 out of 437 NPPs have been permanently shutdown as of August 2022 according to the IAEA. In Korea, the decommissioning of NPPs is emerging as a challenge due to the permanent shutdown of Kori Unit 1 and Wolsong Unit 1. However, there are no cases of decommissioning activities for Heavy Water Reactor (HWR) such as Wolsong Unit 1 although most of the decommissioning technologies for Light Water Reactor (LWR) such as Kori Unit 1 have been developed and there are cases of overseas decommissioning activities. This study shows the development of a decommissioning waste amount/cost/process linkage program for decommissioning Pressurized Heavy Water Reactor (PHWR), i.e. CANDU NPPs. The proposed program is an integrated management program that can derive optimal processes from an economic and safety perspective when decommissioning PHWR based on 3D modeling of the structures and digital mock-up system that links the characteristic data of PHWR, equipment and construction methods. This program can be used to simulate the nuclear decommissioning activities in a virtual space in three dimensions, and to evaluate the decommissioning operation characteristics, waste amount, cost, and exposure dose to worker. In order to verify the results, our methods for calculating optimal decommissioning quantity, which are closely related to radiological impact on workers and cost reduction during decommissioning, were compared with the methods of the foreign specialized institution (NAGRA). The optimal decommissioning quantity can be calculated by classifying the radioactivity level through MCNP modeling of waste, investigating domestic disposal containers, and selecting cutting sizes, so that costs can be reduced according to the final disposal waste reduction. As the target waste to be decommissioning for comparative study with NAGRA, the calandria in PHWR was modeled using MCNP. For packaging waste container, NAGRA selected three (P2A, P3, MOSAIK), and we selected two (P2A, P3) and compared them. It is intended to develop an integrated management program to derive the optimal process for decommissioning PHWR by linking the optimal decommissioning quantity calculation methodology with the detailed studies on exposure dose to worker, decommissioning order, difficulty of work, and cost evaluation. As a result, it is considered that it can be used not only for PHWR but also for other types of NPPs decommissioning in the future to derive optimal results such as worker safety and cost reduction.

This study examined the effects of freshwater discharge by artificial dikes from the Kanwol and Bunam lakes on the dynamics in the Chunsu Bay, Yellow Sea, Korea, during the summer season based on three-dimensional numerical modeling experiments. Model performances were evaluated in terms of skill scores for tidal elevation, velocity, temperature, and salinity and these scores mostly exceeded 90 %. The variability in residual currents before and after the freshwater discharge was examined. The large amount of lake water discharge through artificial dikes may result in a dramatically changed density field in the Chunsu Bay, leading to an estuarine circulation system. The density-driven current formed as a result of the freshwater inflow through the artificial dikes (Kanwol/Bunam) caused a partial change in the tidal circulation and a change in the scale and location of paired residual eddies. The stratification formed by strengthened static stability following the freshwater discharge led to a dramatic increase in the Richardson number and lasted for a few weeks. The strong stratification suppressed the vertical flux and inhibited surface aerated water mixing with bottom water. This phenomenon would have direct and indirect impacts on the marine environment such as hypoxia/anoxia formation at the bottom.

The serious emergence of chemical-mediated residual toxicity and insect resistance have been enforced the regulation of synthetic pesticides. Future decisions to select more realistic control options probably depend on the speed of technological development in chemical and biological pesticides. Now, a strategic collaboration between synthetic pesticides and biopesticides has been progressed, such as distribution and R&D in collaboration and M&A for obtaining microbial resources. Recently registered microbial pesticides are entomopathogenic fungi in pest management. A concept of e-biopesticide could be properly combined with digital agriculture and accelerate the use of biological control agents in the future farming.

Little consideration has been given to the insect epizootiology in pest management. High production cost of fungalinsecticides might be a technical barrier. Application of the fungal insecticides to unfavorable conditions might result inlower performance in pest management. Herein this work, we suggest ecological biocontrol considering long-term colonizationin nature rather than quick pest control. Fungal biopesticides should be frequently combined with chemical pesticides infields, particualrly spatial combination strategy rather than temporal combination. Additionally other important technicalaspects need to be strongly considered, such as economic downstream process, effective control and environmentally safe,so finally proposing e-biopesticide. Lastly R&D system needs to be clearly and efficiently organized for high performance.Week-based summary and reporting system, weekly report and project file are main system in our laboratory which hasour lab work more effectively and efficiently, consequently resulting in tech-transfer to an industry and re-investment.

Although baculoviruses have a long history of safe use as specific, environmentally benign insect control agents, their use has been limited by several factors, especially their slow speed of action. In this study, we intended to improve the insecticidal activities of Autographa californica nucleopolyhedrovirus (AcMNPV) by expressing Kunitz-type toxin isolated from venoms of Bombus ignitus or Araneus ventricosus. For this, recombinant AcMNPVs, AcBi-KTT, AcAv-Tox1 and AcAv-Tox2 expressing Bi-KTT, Av-Tox1 and Av-Tox2, respectively, under the control of p10 gene promoter were constructed. While polyhedra produced by these recombinant viruses were identical to those of the wild-type AcMNPV in shape, their sizes were relatively smaller than those of the AcMNPV. Among recombinant viruses, AcBi-KTT and AcAv-Tox2 showed significant reduction in median lethal time (LT50) against Spodoptera exigua larvae. Especiaaly, these two viruses showed about 6.2~10-folds higher polyhedra production rate compared to that of the AcMNPV. These results suggested that Kunitz-type toxins from insect venom could be successfully applied to improve insecticidal activity of baculoviruses.

Rice black-streaked dwarf virus (RBSDV), a member of the genus Fijivirus within the family Reoviridae, is the causative agent of maize rough dwarf and rice black-streaked dwarf diseases, both of which can lead to severe yield losses in east Asia. Although molecular approaches such as RT-PCR have potential for detection and diagnosis of this virus infections, their impact on high throughput certification is still limited. Therefore, the development of an antibody-based assay for rapid and effective diagnosis of RBSDV is preferable. In this study, we collected RBSDV from rice with rough dwarf disease and its complete nucleotide sequences of 10 genomic segments encoding 12 non-overlapping ORFs were determined. Among 12 ORFs, ORF1, 2 and 12 showed high level of similarities with the RdRp, major core protein and major outer shell protein, respectively. These ORFs were expressed as polyhedrin fusion protein or full-length soluble protein using baculovirus expression system for the preparation of specific antibody against RBSDV, which could be useful for the detection and diagnosis of this virus.

Entomopathogenic fungi are widely available as biological control agents for controlling insect pests in agriculture and forestry. The fungal culture broth contains various pathogenesis-related components such as blastospores, mycelium and insecticidal enzymes such as chitinase, Pr1- and Pr2-proteases, which have been reported to play an important role in penetrating insect cuticles. In this study, we tried to evaluate the utility of culture broth from Beauveria bassiana SFB-205 to control lepidopteran pests. High level of insecticidal activity correspond to over 90% of mortality were observed when the culture broth of B. bassiana SFB-205 was inoculated to the Spodoptera litura larvae together with the B. thuringiensis K1. The freeze-dried culture broth showed synergistic effects in insecticidal activity against larvae of S. exigua and S. litura when treated with corresponding baculoviruses, SeNPV and SlNPV. Active ingredient of the B. bassiana SFB-205 culture broth was identified to chitinase, which have truncated form by insertional mutation compared to previously reported chitinases.

Recently, we constructed a novel recombinant baculovirus genome, bEasyBac, enabling easy and fast generation of pure recombinant baculovirus without any purification step. In the bEasyBac, bacteriophage lambda site-specific attachment (att) sites were introduced to facilitate the generation of recombinant viral genome by in vitro transposition. Moreover, extracellular RNase gene from Bacillus amyloliquefaciens, barnase, was expressed under the control of Cotesia plutellae bracovirus (CpBV) ORF3005 early promoter to negatively select against non-recombinant background. The bEasyBac could replicate in host insect cells only when the barnase gene was replaced to gene of interest by in vitro transposition. When the bEasyBac was transposed with pDualBac-EGFP and the EGFP expression efficiency along passage was investigated, the resulting recombinant virus, EasyBac-EGFP, showed comparable level of EGFP expression efficiency with the plaque-purified recombinant virus, AcEGFP, which was constructed using bAcGOZA system, whereas, the non-purified AcEGFP showed quite reduced level of EGFP along passages. Moreover, no non-recombinant backgrounds were detected from unpurified EasyBac-EGFP stocks. Based on these results, high-throughput condition for generation of multiple recombinant viruses in a time was established. These results suggest that the bEasyBac has an effective benefit enabling for high-throughput baculovirus expression vector without purifying recombinant virus.

Among the cultured products of Beauveria bassiana SFB-205 (KCCM 10892P), the supernatant showed the highest insecticidal activity against 2nd instars of Aphis gossypii (Aphididae) nymphs under glasshouse condition. The enzymes in the supernatant were confirmed as active materials, and the chitinase was finally selected as a QC factor for commercial production. However, the chitinase activity in the supernatant decreased by 11-folds due to the thermal stress at 50℃ for 2 h. To obtain thermal stability, the chitinase in the supernatant was adsorbed to a precipitable material and the pellet was freeze-dried (PCT/KR2007/005886). The adsorbent-A showed about 92.7% of harvesting efficiency which was higher than the other candidates. The chitinase activity of the freeze-dried powder was kept up about 82.0% of initial activity for the same thermal stress. Subsequently, an optimal formulation recipe was established to maximize long-term storage stability and efficacy. SFB-205 oil-based formulation was stable up to 18 months at room temperature. It showed 96.1% efficacy against 2nd instars of A. gossypii nymphs at 1 day after the treatment in the glasshouse. This novel approach can be a promising method to develop competitive biopesticies in the entomopathogenic fungi, even though it needs to be intensively studied.

Mungbean (Vigna radiata) is a fast-growing, warm-season legume crop that is primarily cultivated in developing countries of Asia. We constructed a draft genome sequence of mungbean to facilitate genome research into the subgenus Ceratotropis and to enable a better understanding of the evolution of leguminous species. The draft genome sequence covers 80% of the estimated genome, of which 50.1% consists of repetitive sequences. In total, 22,427 high confidence protein-coding genes were predicted. Based on the de novo assembly of additional wild mungbean species, the divergence of what was eventually domesticated and the sampled wild mungbean species appears to have predated domestication. Moreover, the de novo assembly of a tetraploid Vigna species (Vigna reflexo-pilosa var. glabra) provided genomic evidence of a recent allopolyploid event. To further study speciation, we compared de novo RNA-seq assemblies of 22 accessions of 18 Vigna species and protein sets of Glycine max and Cajanus cajan. The species tree was constructed by a Bayesian Markov chain Monte Carlo method using highly confident orthologs shared by all 24 accessions. The present assembly of V. radiata var. radiata will facilitate genome research and accelerate molecular breeding of the subgenus Ceratotropis.

The purpose of this study is to explore the concept of a logistics hub, identify key factors and milestones for its development, and give some recommendations and implications to developing countries. For this the countries competing to be Logistics hub in Northeast Asia (NEA), such as South Korea, japan and China, are taken into consideration These countries have under its priority policies the development of a logistics hub vision to become the central area of the region achieving microeconomic and macroeconomic prosperity. Based on the review of the relevant literature, five factors came up as key determinants for the development of a hub project: 1. Logistics services support and infrastructure. 2. Business environment. 3. Economic determinants. 4. Political support and 5. Access to international markets. These are going to be analyzed together with its different variables, using statistical methods.