Earthquakes of magnitude 3.0 or greater occur in Korea about 10 times on average yearly, and the number of earthquakes occurring in Korea is increasing. As many earthquakes have recently occurred, interest in the safety of nuclear power plants has increased. Nuclear power plants are equipped with many cabinet-type control facilities to regulate safety facilities, and function maintenance is required during an earthquake. The seismic performance of the cabinet is divided into structural and functional performances. Structural performance can be secured during the design procedure. Functional performance depends on the vibration performance of the component. Therefore, it is necessary to confirm the seismic performance of the components. Generally, seismic performance is confirmed through seismic simulation tests. When checking seismic performance through seismic simulation tests, it is difficult to determine the effect of frequency and maximum acceleration on an element. In this paper, shaking table tests were performed using various frequencies and various maximum accelerations. The seismic performance characteristics of the functions of electrical equipment components were confirmed through tests.

PURPOSES : This study is conducted to evaluate the development of materials for extinguishing ESS(Energy Storage System) fires in electric vehicles using industrial byproducts. METHODS : Grout containing an appropriate amount of fly ash, silica fume, blast furnace slag powder, and ferronikel slag, which are industrial byproducts, was prepared. The fluidity, stress, and mechanical properties were evaluated in accordance with standard test methods. RESULTS : The fluidity of the materials used for the evolution of ESS fires differed depending on the material of the industrial byproducts. In the case of blast furnace slag, its fluidity is low owing to viscosity even when it content is high, and the use of ferronikelsrag is shown to be suitable for the evolution of ESS fires in fluidity and curing tests. CONCLUSIONS : Fire-extinguishing materials using industrial byproducts require a long curing time but exhibit the fluidity required for ESS fire extinguishment. In particular, the curing and fluidity of Peronikel slag and fly ash are suitable for ESS fire extinguishing.

전기 캐비닛은 병원 및 발전소와 같은 중요 시설물에서 운영과 관리를 위한 시스템 기기를 보관한 다. 지진과 같은 극한하중 하에서 중요 시설물은 지속적으로 운영 및 제어되어야 하기 때문에 전기 캐 비닛의 안전성은 평가되고 확보되어야 한다. 하지만 실험적 연구만으로 다양한 유형의 전기 캐비닛에 대한 내진성능 평가를 수행하는 것은 많은 제약이 있다. 따라서 다양한 연구자들은 전기 캐비닛의 유 한요소 모델을 구축하고 내진성능 평가를 수행하였다. 유한요소 모델은 beam-stick 요소를 기반으로 구축되거나 3차원 shell 요소를 기반으로 구축되어왔다. Beamk-stick 요소 기반 및 3차원 shell 요소 기반의 유한요소 모델에 대한 전체거동에 대한 비교를 수행한 사례는 있으나 국부거동에 대한 동적응 답을 비교한 연구사례는 없다. 전기 캐비닛은 내부에 시스템 기기가 보관되므로 내부의 국부거동 기반 의 내부응답을 포착할 수 있어야한다. 따라서 본 연구는 단문형 전기 캐비닛에 대한 beam-stick 요소 및 3차원 shell요소를 기반으로 유한요소 모델을 구축하고 동일한 높이에서 가속도 응답을 비교하였다. 결과적으로 beam-stick 요소 기반의 3차원 유한요소 모델은 전기 캐비닛 내부 응답 스펙트럼을 정확 히 예측할 수 없기 때문에 내부 응답 스펙트럼을 위해서는 3차원 shell요소 기반의 상세 유한요소 모 델을 사용해야 한다.

호서지역 청동기시대 전기에는 미사리ㆍ가락동ㆍ역삼동유형이 일정 기간 병존하는 것으로 알려져 있다. 본고에서는 이러한 세 유형 간 접촉 형태를 분류하고 시간에 따른 문화접촉의 변천 및 전개 양 상을 살펴보았다. 유형 간 접촉 형태는 크게 A, B, C, D의 4가지 타입으로 구분할 수 있다. 우선 A 타입은 서로 다른 유형의 요소가 유물 단위에서 결합되어 나타나는 형태이다. 이와 달리 B타입은 특 정 유형의 취락 내 타 유형의 유물이 개별 기종으로 유입되는 경우이며, C타입은 타 유형의 주거 양 식이 유입되는 경우에 해당한다. 한편, A+B, A+C, B+C와 같이 복수의 접촉 타입이 조합되어 나타 나는 경우도 존재하는데, 이를 D타입으로 설정하였다. 문화접촉의 종류로는 교환, 이주, 전파가 있으며 호서지역 청동기시대 전기 세 유형 간 접촉 타입 도 이러한 틀에서 해석할 수 있다. B타입의 경우 도구의 교환, AㆍC타입은 타 유형 주민의 이주까지 도 상정 가능하다. 각 타입이 복수로 나타나는 D타입의 경우에 대해서는 보다 지속적인 접촉 또는 직 접적인 이주의 가능성을 생각해 볼 수 있다. 단계별 호서지역 청동기시대 전기 유형 간 문화접촉의 전 개상을 살펴보면, 우선 세 유형이 호서지역 내 유입되는 1단계부터 상호 간 교환ㆍ이주 등의 접촉이 나타난다. 2단계에는 가락동-역삼동유형 간 접촉이 증가하는 한편, 미사리유형은 쇠퇴하면서 주변 가락동유형 취락으로 유입되는 양상이 일부 관찰된다. 이후 3단계에는 미사리유형이 소멸하고 가락동 ㆍ역삼동유형도 쇠퇴하면서 전기 유형 간 접촉 흔적이 급격히 감소하는 모습을 볼 수 있다.

This study attempted to experimentally confirm the change in damping force for a prototype self-leveling damper with a pump rod and a leveling port applied with a new spiral flow path for small and medium-sized electric SUVs. The faster the excitation speed of the piston rod, the higher the damping force during compression and rebound and it can be seen that the graph shape appears in a similar pattern. Based on this, it can be used as basic data for additional characteristic tests such as temperature, sliding resistance, and operating sound test, etc.

Silicon carbide (SiC) has emerged as a promising material for next-generation power semiconductor materials, due to its high thermal conductivity and high critical electric field (~3 MV/cm) with a wide bandgap of 3.3 eV. This permits SiC devices to operate at lower on-resistance and higher breakdown voltage. However, to improve device performance, advanced research is still needed to reduce point defects in the SiC epitaxial layer. This work investigated the electrical characteristics and defect properties using DLTS analysis. Four deep level defects generated by the implantation process and during epitaxial layer growth were detected. Trap parameters such as energy level, capture-cross section, trap density were obtained from an Arrhenius plot. To investigate the impact of defects on the device, a 2D TCAD simulation was conducted using the same device structure, and the extracted defect parameters were added to confirm electrical characteristics. The degradation of device performance such as an increase in on-resistance by adding trap parameters was confirmed.

Fluorine-doped tin oxide (FTO) has been used as a representative transparent conductive oxide (TCO) in various optoelectronic applications, including light emitting diodes, solar cells, photo-detectors, and electrochromic devices. The FTO plays an important role in providing electron transfer between active layers and external circuits while maintaining high transmittance in the devices. Herein, we report the effects of substrate rotation speed on the electrical and optical properties of FTO films during ultrasonic spray pyrolysis deposition (USPD). The substrate rotation speeds were adjusted to 2, 6, 10, and 14 rpm. As the substrate rotation speed increased from 2 to 14 rpm, the FTO films exhibited different film morphologies, including crystallite size, surface roughness, crystal texture, and film thickness. This FTO film engineering can be attributed to the variable nucleation and growth behaviors of FTO crystallites according to substrate rotation speeds during USPD. Among the FTO films with different substrate rotation speeds, the FTO film fabricated at 6 rpm showed the best optimized TCO characteristics when considering both electrical (sheet resistance of 13.73 Ω/□) and optical (average transmittance of 86.76 % at 400~700 nm) properties with a figure of merit (0.018 Ω-1).

New piezoelectric and triboelectric materials for energy harvesting are being widely researched to reduce their processing cost and complexity and to improve their energy conversion efficiency. In this study, BaTiO3 films of various thickness were deposited on Ni foams by R.F. magnetron sputtering to study the piezoelectric and triboelectric properties of the porous spongy structure materials. Then piezoelectric nanogenerators (PENGs) were prepared with spongy structured BaTiO3 and PDMS composite. The output performance exhibited a positive dependence on the thickness of the BaTiO3 film, pushing load, and poling. The PENG output voltage and current were 4.4 V and 0.453 μA at an applied stress of 120 N when poled with a 300 kV/cm electric field. The electrical properties of the fabricated PENG were stable even after 5,000 cycles of durability testing. The triboelectric nanogenerators (TENGs) were fabricated using spongy structured BaTiO3 and various polymer films as dielectrics and operated in a vertical contact separation mode. The maximum peak to peak voltage and current of the composite film-based triboelectric nanogenerator were 63.2 V and 6 μA, respectively. This study offers new insights into the design and fabrication of high output nanogenerators using spongy structured materials.

The curb weight of electric trucks is more than 10% higher than that of conventional internal combustion engine trucks due to the motor and battery. For this reason, cargo box developed for small electric trucks is required weight reduction, and cargo door that can reduce weight and maintain strength are being developed. In this paper, we designed the lightweight cargo door, confirmed the stability of the door through structural analysis, and developed a cargo box door that was more than 25% lighter by applying composite materials such as Sheet Molding Compound(SMC) and Fiber Reinforced Plastic(FRP).

In zinc-air batteries, the gel polymer electrolyte (GPE) is an important factor for improving performance. The rigid physical properties of polyvinyl alcohol reduce ionic conductivity, which degrades the performance of the batteries. Zinc acetate is an effective additive that can increase ionic conductivity by weakening the bonding structure of polyvinyl alcohol. In this study, polymer electrolytes were prepared by mixing polyvinyl alcohol and zinc acetate dihydride. The material properties of the prepared polymer electrolytes were analyzed by Fourier-transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), X-ray diffraction (XRD), and thermogravimetric analysis (TGA). Also, Electrochemical impedance spectroscopy was used to calculate ionic conductivity. The electrolyte resistances of GPE, 0.2 GPE, 0.4 GPE, and 0.6 GPE were 0.394, 0.338, 0.290, and 0.213 Ω, respectively. In addition, 0.6 GPE delivered 0.023 S/cm high ionic conductivity. Among all of the polymer electrolytes tested, 0.6 GPE showed enhanced cycle life performance and the highest specific discharge capacity of 11.73 mAh/cm2 at 10 mA. These results verified that 0.6 GPE improves the performance of zinc-air batteries.

Highly safe lithium-ion batteries (LIBs) are required for large-scale applications such as electrical vehicles and energy storage systems. A highly stable cathode is essential for the development of safe LIBs. LiFePO4 is one of the most stable cathodes because of its stable structure and strong bonding between P and O. However, it has a lower energy density than lithium transition metal oxides. To investigate the high energy density of phosphate materials, vanadium phosphates were investigated. Vanadium enables multiple redox reactions as well as high redox potentials. LiVPO4O has two redox reactions (V5+/V4+/V3+) but low electrochemical activity. In this study, LiVPO4O is doped with fluorine to improve its electrochemical activity and increase its operational redox potential. With increasing fluorine content in LiVPO4O1-xFx, the local vanadium structure changed as the vanadium oxidation state changed. In addition, the operating potential increased with increasing fluorine content. Thus, it was confirmed that fluorine doping leads to a strong inductive effect and high operating voltage, which helps improve the energy density of the cathode materials.

With the increasing demand for electronic products, the amount of multilayer ceramic capacitor (MLCC) waste has also increased. Recycling technology has recently gained attention because it can simultaneously address raw material supply and waste disposal issues. However, research on recovering valuable metals from MLCCs and converting the recovered metals into high-value-added materials remains insufficient. Herein, we describe an electrospinning (E-spinning) process to recover nickel from MLCCs and modulate the morphology of the recovered nickel oxide particles. The nickel oxalate powder was recovered using organic acid leaching and precipitation. Nickel oxide nanoparticles were prepared via heat treatment and ultrasonic milling. A mixture of nickel oxide particles and polyvinylpyrrolidone (PVP) was used as the E-spinning solution. A PVP/NiO nanowire composite was fabricated via Espinning, and a nickel oxide nanowire with a network structure was manufactured through calcination. The nanowire diameters and morphologies are discussed based on the nickel oxide content in the E-spinning solution.

In this study, the performances of H2S, NH3, and HCl sensors for real-time monitoring in small emission facilities (4, 5 grades in Korea) were evaluated at high concentration conditions of those gases. And the proper approach for the collection of reliable measurement data by sensors was suggested through finding out the effect on sensor performances according to changes in temperature and humidity (relative humidity, RH) settings. In addition, an assessment on sensor data correction considering the effects produced by environmental settings was conducted. The effects were tested in four different conditions of temperature and humidity. The sensor performances (reproducibility, precision, lower detection limit (LDL), and linearity) were good for all three sensors. The intercept (ADC0) values for all three sensors were good for the changes of temperature and humidity conditions. The variation in the slope value of the NH3 sensor showed the highest value, and this was followed by the HCl, H2S sensors. The results of this study can be helpful for data collection by enabling the more reliable and precise measurements of concentrations measured by sensors.

This research aims to understand the specific aspects of the utilization of the pavilion by a group of governors in the mobile office system of the early Joseon Dynasty through two diaries written in the 16th century. Miam Diary by Yu Hee-chun, a governor of Jeolla Province, and Jaeyeongnam Diary by Hwang Sa-woo, a chief aide of Gyeongsang Province, are important historical materials that reveal the utilization patterns of the pavilion by the governor, who was the decision maker and main user of governmental pavilions. As a result of analyzing the two diaries, the utilization of governmental pavilions was concentrated in the hot summer season, May to July, which is closely related to the perception of temperature and humidity. While pavilions are mostly used as office and banquet places, some notable usage patterns have been identified. When there were several governmental pavilions in a town, the order of appreciation was determined by considering the location and scenery, and the pavilions were also used as a place to encourage learning as governors taught Confucian scholars well. Governmental pavilions functioned as a device to visualize hierarchy through seating and accommodation arrangements. The authors of the diaries left comments on the famous pavilions and sometimes went to see the pavilions after asking for permission from the superior. This research is meaningful in that it reconstructed the relationship network and phases of the times of governmental pavilions scattered across the country through institutions and daily life.

ZnO/Cu/ZnO (ZCZ) thin films were deposited at room temperature on a glass substrate using direct current (DC) and radio frequency (RF, 13.56 MHz) magnetron sputtering and then the effect of post-deposition electron irradiation on the structural, optical, electrical and transparent heater properties of the films were considered. ZCZ films that were electron beam irradiated at 500 eV showed an increase in the grain sizes of their ZnO(102) and (201) planes to 15.17 nm and 11.51 nm, respectively, from grain sizes of 13.50 nm and 10.60 nm observed in the as deposited films. In addition, the film’s optical and electrical properties also depended on the electron irradiation energies. The highest opto-electrical performance was observed in films electron irradiated at 500 eV. In a heat radiation test, when a bias voltage of 18 V was applied to the film that had been electron irradiated at 500 eV, its steady state temperature was about 90.5 °C. In a repetition test, it reached the steady state temperature within 60 s at all bias voltages.

전기자동차의 빠른 확산은 지구온난화와 자연재해 대응을 위해 국제적으로 중요한 과제이다. 대중화를 위해 “캐즘(Chasm) 극복”은 필수적이나, 선행연구들은 전기차 초기시장 분석이 대부분이며 캐즘 단계의 연구는 다소 제한적이다. 본 연구는 전기차 초기 단계를 벗어나는 국내시장에서 소비자의 전기차 구매 주요 저해 요인과, 이에 영향을 주는 소비자의 인구통계학적 특성 및 자동차 관련 경험을 설문과 통계 기법을 통해 심층 분석하였다. 연구 결과, 한국 전기차 시장은 캐즘 전 단계로 판단되며, 전기차의 “기술에 대한 낮은 신뢰성”, “경제성에 대한 의문”, “충전-운전 불편성”이 전기차의 주요 수용 저해 요인으로 확인되었다. 지역에 따른 고속/완속 충전 인프라의 적절한 구축, 교육과 홍보를 통한 전기차의 인식개선, 전기차 수용에 우호적인 얼리어답터(Early adopter)의 전기차 수용 촉진은 캐즘을 극복하는 과정에서 중요한 역할을 할 것으로 판단된다.