Interim dry cask storage systems comprising AISI 304 or 316 stainless steel canisters have become critical for the storage of spent nuclear fuel from light water reactors in the Republic of Korea. However, the combination of microstructural sensitization, residual tensile stress, and corrosive environments can induce chloride-induced stress corrosion cracking (CISCC) for stainless steel canisters. Suppressing one or more of these three variables can effectively mitigate CISCC initiation or propagation. Surface-modification technologies, such as surface peening and burnishing, focus on relieving residual tensile stress by introducing compressive stress to near-surface regions of materials. Overlay coating methods such as cold spray can serve as a barrier between the environment and the canister, while also inducing compressive stress similar to surface peening. This approach can both mitigate CISCC initiation and facilitate CISCC repair. Surface-painting methods can also be used to isolate materials from external corrosive environments. However, environmental variables, such as relative humidity, composition of surface deposits, and pH can affect the CISCC behavior. Therefore, in addition to research on surface modification and coating technologies, site-specific environmental investigations of various nuclear power plants are required.

Safe management of spent nuclear fuel (SNF) is a key issue to determine sustainability of current light water reactor (LWR) fleet. However, none of the countries are actually conducting permanent disposal of SNFs yet. Instead, most countries are pursuing interim storage of spent nuclear fuels in dry cask storage system (DCSS). These dry casks are usually made of stainlesssteels for resistibility against cracking and corrosion, which can be occurred over a long-term storage period. Nevertheless, some corrosion called Chloride-Induced Stress Corrosion Cracking (CISCC) can arise in certain conditions, exacerbating the lifetime of dry casks. CISCC can occur if the three conditions are satisfied simultaneously: (i) residual tensile stress, (ii) material sensitization, and (iii) chloride-rich environment. A residual tensile stress is developed by the two processes. One is the bending process of stainless-steel plates into a cylindrical shape, and the other is the welding process, which can incur solidification-induced stress. These stresses provide a driving force of pit-to-crack transition. Around the fusion weld areas, chromium is precipitated at the grain boundary as a carbide form while it depletes chromium around it, leading to material susceptible to pitting corrosion. It is called sensitization. Finally, coastal regions, where nuclear power plants usually operate, tend to have a higher relative humidity and more chloride concentration compared to inland areas. This high humidity and chloride ion concentration initiate pitting corrosion on the surface of stainless-steels. To prevent initiation of CISCC, at least one of the three conditions should be removed. For this, several surface engineering techniques are under investigation. One of the most promising approaches is surface peening method, which is the process that impacts the surface of materials with media (e.g., small pins, balls, laser pulse). By this impact, plastic deformation on the surface occurs with compressive stress that counteracts with pre-existing residual tensile stress, so this approach can prevent pit-to-crack transition of stainless-steels. Also, cold spray deposition can prevent CISCC. Cold spray deposition is a method of spraying fine metal powder to a substrate by accelerating them to supersonic velocity with propellant gas. As a result, a thin coating composed of the feedstock powders can protect the substrate from outer corrosive environments. In addition, the impact of the feedstock powder on the substrate during the process provides compressive stress, similar to the peening method.

본 연구에서는 남해안에 건설된 사용기간이 5~34년의 해상 콘크리트 교량의 염화물이온농도에 대한 실측데이터로부터 표면 염화물이온농도를 추정하고, 기존에 제시된 시방서와 타 연구결과에서 제시한 값들의 타당성을 평가하였다. 그리고 해상 콘크리트 교량의 염해방지도장의 유무, 염화물이온농도, 탄산화 깊이 및 콘크리트 압축강도의 상관관계를 도출하여 상호 작용을 평가하였다. 연구결과에 의하면, 표면염화물이온농도는 간만대에서 KCI 2009, 물보라지역과 해상대기중에서 Cheong et al.(2005)의 제안한 값이 타당한 것으로 판단된다. 또한, 해상 콘크리트 교량의 염해방지도장은 염화물이온의 침투, 탄산화 깊이 및 압축강도 저하 대한 방지효과가 있음을 알 수 있었다. 콘크리트의 압축 강도는 탄산화 깊이와 염화물이온농도의 증가에 따라 감소하였다.

콘크리트는 인장력에 취약한 재료적 특징을 갖기 때문에 콘크리트 구조물의 사용기간 중에 발생하는 균열은 내구성능 평가 시 필히 고려되어야 한다. 본 연구에서는 두 수준의 강도를 고려한 플라이애시 콘크리트를 배합하여 옥외 폭로 시험을 실시하였다. 노출 환경은 비말 조건으로 설정하였으며, 균열 폭이 콘크리트의 염화물 확산 거동에 미치는 영향을 평가하고자 각 배합의 시편에 0.1 mm 간격으로 최대 1.0 mm 까지의 균열 폭을 야기하였다. 그 후 3가지 수준의 노출기간(180일, 365일, 730일)을 고려하여 겉보기 염화물 확산계수 및 표면 염화물량을 산출하였다. 균열 폭의 증가에 따라 두 배합 모두 확산계수가 증가하였으며, 노출기간이 증가함에 따라 확산계수는 감소하였다. 또한 노출 기간이 증가함에 따라 균열 폭이 확산계수에 미치는 영향이 감소하였는데, 이는 염소 이온 기반 수화물이 콘크리트의 확산성을 저감시키기 때문으로 사료된다. 표면 염화물량 거동은 겉보기 염화물 확산계수 거동 대비 균열 폭의 증가에 따른 뚜렷한 변화 거동이 발생하지 않았으며, 고강도 배합에서 보통 강도 배합 대비 78.9 % ~ 90.7 %의 표면 염화물량을 나타내어 강도와의 상관관계를 갖는 것으로 판단된다.

Chloride penetration into concrete is the main cause of the corrosion of steel in concrete structures exposed to chloride-rich environments. As a preventive or remedial method, surface treatments on concrete have been increasingly applied to both new and existing concrete structures to combat this problem. So far, knowledge of how a surface treatment reduces chloride diffusion is limited and the relationship between chloride diffusion resistance and surface treatment parameters, such as thickness, porosity and diffusion coefficient, has not been quantitatively identified. In this paper, chloride ion penetration modeling is performed to predict the service life of the surface treated concrete.

This study was evaluated the chloride penetration resistance performance of Surface Protection Material(SPM). SPM was applied 0.25 and 0.51 kg/㎡ to the surface of the mortar and immersed aging of the chloride solution 7, 14, and 28 days. As a results, In the case of SPM was applied, chloride did not penetrate until the 28th day.

Recently durability design based on deterministic or probabilistic method has been attempted since service life evaluation in RC(Reinforced Concrete) structure exposed to chloride attack is important. The deterministic durability design contains a reasonable method with time effect on surface chloride content and diffusion coefficient, however the probabilistic design procedure has no consideration of time effect on both. In the paper, a technique on PDF(Probability of Durability Failure) evaluation is proposed considering time effect on diffusion and surface chloride content through equivalent surface chloride content which has same induced chloride content within a given period and cover depth. With varying period to built-up from 10 to 30 years and maximum surface chloride content from 5.0 kg/m3 to 10.0 kg/m3, the changing PDF and the related service life are derived. The proposed method can be reasonably applied to actual durability design with preventing conservative design parameters and considering the same analysis conditions of the deterministic method.

The Chloride ion penetration resistance of Engineered cementitious composite using surface coating material was evaluated in this study. The test results showed that the amount of chloride ion of surface coated specimens were decreased approximately 22 % lower than that of plain specimens

This paper presents an analysis technique considering double-layer concrete and time-dependent diffusion behavior, and the results are compared with those from the previous test results through reverse analysis. Through consideration of time effect, the relative error decreases, which shows more reasonable results. Utilizing the diffusion coefficients from Life365, relative errors increases and it needs deeper penetration depth(e) and lower diffusion coefficient ratio(D1/D2) due to higher diffusion coefficient.

To predict the characteristics of chloride ion penetration in the concrete and rebar corrosion prediction for chloride ion permeation, it is important to understand the chloride ion diffusion coefficient. It is possible that the reinforced concrete structures can be predicted accurately by the profile of the position of the rebar chloride ions using a chloride ion diffusion coefficient. On this study, analysis of chloride ion diffusion coefficient experimented in Korea and the effect of changes in the surface chloride ions concentration on chloride attacked durability design was analyzed