PURPOSES : The objective of this study is to analyze the significance of binder aging in a hot-mix asphalt (HMA) mixture in an insulated camber for a long duration for repair works, where the absolute viscosity level and service life reduction (SLR) are assessed based on the haul time, as well as to suggest a methodology for reducing the aging level. METHODS : Because the HMA mixture is stored in an insulated box carriage at high temperature for repair works, if the binder in the mix is severely oxidized, then the repaired pavement will not exhibit a long service life. Therefore, the 13-mm dense-graded HMA mix with PG64-22 was aged in an oven at 160 °C for 1, 2, 4 and 8 h to evaluate its aging level. Gel-permeation chromatography was performed on the mixture particle without binder recovery to measure the large-molecular size ratio, from which the estimated absolute viscosity (EAV) was computed using a best-fit regression model. The SLR values of aged and repaired mixes were estimated to determine the amount of deterioration in the mixes caused by severe aging. Hydrated lime (HL) was introduced into the mix at a ratio of 1.5 wt% of the total mix. The aging level and SLR were compared with those of the repaired mix without HL. RESULTS : The binder EAV of the HMA mix increases significantly with the mixture aging duration. In particular, the binder EAV level of a 4-h aged mix is similar to the asphalt viscosity level of a pavement with approximately 7 years of service life. The service life expressed based on the aging level is interpreted as the reduced service life of the aged mix, which is already oxidized before it is used. Meanwhile, the binder of an 8-h aged mix without HL aged significantly and its SLR is approximately 11 years. However, its aging level and SLR reduced significantly when HL. is incorporated. CONCLUSIONS : The binder aging level of the repaired mix increases significantly with its storage duration in a hot chamber for carriage. However, since the aging level decreases significantly by the incorporation of HL, the use of HL is highly recommended when preparing new mix for repair works to be performed in a hot-chamber for a long duration.

PURPOSES : The purpose of this study was to reduce greenhouse gases and prevent potholes on roads by evaluating the performances of hot and warm mixed asphalt mixtures. METHODS : Quality tests were conducted using an appropriate aggregate ratio of the asphalt mixture. The tests for comparing the warm mixed asphalt mixture are the indirect tensile strength and toughness, Marshall stability and flow, tensile strength ratio, and dynamic immersion test. A performance evaluation was conducted using a mixture that satisfied the quality test results. A performance evaluation test was also conducted using the dynamic modulus and Hamburg wheel tracking test. To analyze the performance based on the amine content, the performance was compared with that of a hot mixed asphalt mixture. RESULTS : All tests for the mixture results satisfied the standard values. The optimal amine content was analyzed through the high and low frequencies of the dynamic modulus test results and stripping inflection point with the final rut depth of the Hamburg wheel tracking test. The dynamic modulus test results demonstrated better crack resistance and plastic deformation when a high amine content ratio was used. The Hamburg wheel-tracking test showed water resistance and plastic deformation resistance. The test results of the Hamburg wheel tracking indicated better deformation resistance and water resistance when a high amine content ratio was used. CONCLUSIONS : The plastic deformation and crack resistance increased with an increase in amine content. Analysis of the comprehensive test revealed that the optimal amine content was between that of additives B(50%) and C(65%). Tests with a granular amine content are planned to confirm the specific components. Also planned are a simplified viscoelastic continuum damage test and a semicircular bending test to evaluate the performance better.

Aralia elata, Chaenomeles sinensis fruit, and Glycyrrhizae radix have been widely used as oriental medicinal plants in Korea, China and Japan and found to possess anti-oxidative and anti-inflammatory activities. The current study was conducted to investigate the neuroprotective effect of an ethanol extract of a mixture of A. elata, C. sinensis fruit, and Glycyrrhizae radix (ACG) against ischemia-induced brain injury in rats and excitotoxic and oxidative neuronal death in primarily cultured rat cortical neurons. Transient focal cerebral ischemia was induced by 2 h middle cerebral artery occlusion followed by 24 h reperfusion (MCAO/R) in rats. Oral administration of ACG (10, 25, and 50 mg/kg) 30 min before MCAO, after 1 h of MCAO, and after 1 h of reperfusion reduced MCAO/R-induced brain infarct and edema formation. ACG also inhibited development of behavioral disabilities in MCAO/R-treated rats. Exposure of cultured cortical neurons to 500 μM glutamate for 12 h resulted in neuronal cell death. ACG (1, 10, and 50 μg/mL) inhibited glutamate-induced neuronal death. Furthermore, ACG inhibited 100 μM hydrogen peroxide (H2O2)- and hypoxia-induced neuronal death. These results suggest that the neuroprotective effect of ACG against ischemia-induced brain damage might be associated with its anti-excitotoxic and anti-oxidative activity and that ACG may have a therapeutic role for prevention of neurodegeneration in stroke.

The present study was conducted to examine the effect of soybean silage as a crude protein supplement for corn silage in the diet of Hanwoo steers. The first experiment was conducted to evaluate the effect of replacing corn silage with soybean silage at different levels on rumen fermentation characteristics in vitro. Commercially-purchased corn silage was replaced with 0, 4, 8, or 12% of soybean silage. Half gram of the substrate was added to 50 mL of buffer and rumen fluid from Hanwoo cows, and then incubated at 39°C for 0, 3, 6, 12, 24, and 48 h. At 24 h, the pH of the control (corn silage only) was lower (p<0.05) than that of soybeansupplemented silages, and the pH numerically increased along with increasing proportions of soybean silage. Other rumen parameters, including gas production, ammonia nitrogen, and total volatile fatty acids, were variable. However, they tended to increase with increasing proportions of soybean silage. In the second experiment, 60 Hanwoo steers were allocated to one of three dietary treatments, namely, CON (concentrate with Italian ryegrass), CS (concentrate with corn silage), CS4% (concentrate with corn silage and 4% of soybean silage). Animals were offered experimental diets for 110 days during the growing period and then finished with typified beef diets that were commercially available to evaluate the effect of soybean silage on animal performance and meat quality. With the soybean silage, the weight gain and feed efficiency of the animal were more significant than those of the other treatments during the growing period (p<0.05). However, the dietary treatments had little effect on meat quality except for meat color. In conclusion, corn silage mixed with soybean silage even at a lower level provided a greater ruminal environment and animal performances, particularly with increased carcass weight and feed efficiency during growing period.

We investigated the standard cultivation substrate for Sparassis latifolia “Neowul” bred in Jeollabuk-do Agricultural Research and Extension Services. Cultivation characteristics and yield were assessed by varying the kind of sawdust and additives, and the mixing ratio. The cultivation period in larch sawdust was the shortest at 97 days. The yield was excellent (143.6 g). The findings indicated that larch is a tree species appropriate for the cultivation of S. latifolia. When the additives were varied, the yield and productivity (53.1%) were highest (116.6 g) for the wheat bran treatment. Thus, wheat bran would be an additive appropriate for culturing S. latifolia. Concerning the use of different mixing ratios, larch sawdust:beet-pulp:wheat bran ratios of 80:15:5 and 85:10:5 resulted in yields of 114.4 g and 111.4 g, and productivity of 52.5% and 51.8%, respectively. These yield and productivity values were not statistically different. Thus, the standard cultivation substrate for S. latifolia can comprise larch sawdust, beet pulp, and wheat bran at a ratio of 80:15:5 or 85:10:5. The carbon/nitrogen (C/N) ratio assumed to be appropriate for the cultivation of S. latifolia was 184 –223. Pinheading would be difficult below a C/N substrate ratio of 105. Thus, the C/N ratio of the media, as well as the pH, would be vital factors affecting pinheading during S. latifolia cultivation.

PURPOSES : Preventive pavement maintenance is an economical and efficient method of infrastructure management. This study aims to improve the performance of cold thin-layer asphalt pavement, which is mainly used in earthwork pavement, and for bridge overlays and structures. METHODS : A cold asphalt mixture of modified emulsified asphalt and RAP was prepared for cold recycled thin-layer asphalt pavement. The performance of the mixture as a function of fiber reinforcement to improve flexural strength and crack resistance was evaluated. RESULTS : The use of RAP aggregate in cold asphalt mixture was found to increase the cohesive strength of the mixture and improve the wet abrasion resistance due to the effect of the residual binder. As a result of the loaded wheel test and flexural tension test with the addition of fiber reinforcement, it was found that the crack resistance of 0.4 % glass fiber was the best, and especially, the flexibility at low temperature was excellent. CONCLUSIONS : The cold recycled thin-layer asphalt pavement mixture has improved cohesive strength, flexural strength, and crack resistance compared to existing cold asphalt pavement materials, so it will contribute to economical and effective maintenance in preventive maintenance of bridge overlays and structural pavements.

The dose was evaluated for the workers transporting the spent resin drums from a spent resin mixture treatment facility. The treatment technology of spent resin mixture waste based on microwave was developed to compensate for the shortcoming of the existing one. The mechanism of the facility for the treatment is divided into separation, desorption, condensation and adsorption process. The treated spent resin that has passed through the microwave reactor flows into the spent resin storage tank. As the treatment time elapses, if spent resin accumulates in the spent resin storage tank, it is moved to the drum of the volume of 200 L. The drum must be moved by the worker, in which case radiation exposure to the drum transport worker occurs. It requires the dose evaluation for drum transport workers in terms of radiation safety. Dose evaluation was performed in consideration of the change in the composition ratio and weight of the spent resin mixture, where the working time for transportation was considered from 10 to 120 minutes in 10-minute increment. In the case of 100 kg of the spent resin mixture, the dose range was derived as 4.62×10−3 – 5.90×10−2 mSv for the 100 kg of spent resin, 4.72×10−3– 5.58×10−2 mSv for the 80 kg of spent resin and 20 kg of zeolite and activated carbon, and 5.38×10−3 – 6.32×10−2 mSv for the 60 kg of spent resin and 40 kg of zeolite and activated carbon. In the case of 150 kg of the spent resin mixture, the dose range was derived as 6.83×10−3 – 8.20×10−2 mSv for the 150 kg of spent resin, 7.13×10−3 – 8.22×10−2 mSv for the 120 kg of spent resin and 30 kg of zeolite and activated carbon, and 8.28×10−3 – 8.86×10−2 mSv for the 90 kg of spent resin and 60 kg of zeolite and activated carbon. The estimated maximum doses for each weight (100 kg and 150 kg of mixture) were confirmed to be 3.16×10−1% and 4.43×10−1% of the annual average dose limit of 20 mSv for radiation workers.

본 논문에서는 지오폴리머의 상변화를 관찰하기 위하여 나노인덴테이션 데이터를 가우시안 믹스쳐 모델로 분석하는 방법을 제시 하였다. 지오폴리머는 일반 시멘트 대비 CO2 발생량을 줄일 수 있어 시멘트 대체 재료로써 많은 연구가 이루어지고 있다. 기존 연구들 로부터 최적의 실리콘/알루미늄 비율을 찾았으나 1.8 초과에서 압축강도 저하의 원인은 아직 불분명하다. 본 연구에서는 실리콘/알루 미늄 비율이 재료에 미치는 영향을 조사하고자 나노인덴테이션 실험을 수행하였다. 실험 결과를 가우시안 믹스쳐 모델로 상분석하였 고, 실리콘/알루미늄 비율이 증가할수록 재료가 균질거동을 하는 것을 관찰할 수 있었다. 본 연구결과는 강도저하를 규명하는데 직접 적인 근거로 활용될 수 있을 것으로 기대된다.

본 연구에서는 비건 인증(Vegan) 화장품 원료 7종 혼합추출물의 항산화능 및 미백효과를 확인 하였다. 라디컬 소거능으로서 DPPH, ABTS, FRAP 실험, 항산화 물질 측정으로서 폴리페놀과 플라보노이 드 함량 측정을 실시하였다. DPPH 실험에서는 105.74 mg ascorbic acid / g의 항산화능을 나타내었으며, ABTS 실험에서는 85.31 mg ascorbic acid / g의 항산화능을 나타내었다. FRAP에서는 7종 혼합추출물의 1 mg이 ascorbic acid 198.01±5.50 μg의 환원력을 보였다. 폴리페놀 함량은 30.19±0.75 mg/g으로 나타 났으며, 플라보노이드 함량은 9.12±0.36 mg/g으로 나타났다. 한편 세포실험에서는 세포 독성과 미백활성 을 알아보았다. 세포독성의 경우 20% 이하의 세포 독성을 보였으며, 100 μg/mL 농도에서 34.70±2.97% 의 멜라닌 생성 억제능을 보여 7종 혼합추출물의 기능성 화장품 원료로서의 가능성을 확인하였다.

The study aims to analyze the mixed characteristics of knit fashion design as demonstrated in Sacai's collection, which promotes hybrid and mesh-up fusion and proposes various knit design ideas. Standards for categorizing mixed phenomena of Sacai’s knit design were established through a review of literature and data analysis. The study’s data collection period was from 2012 to 2021, and a total of 174 items were analyzed. The following are the results. First is the fusion of traditional knit and contemporary styles expressed through de-constructive design; traditional knit styles are combined with contemporary styles through color, material, and knitting structure mixtures, such as mixing Northern European Aran, Fair Isle, Nordic, and Ropy knit. Second, the Sakai knit design combines male and female styles by mixing materials and details. A deconstructed knit cardigan was matched with androcentric pin-striped shirts worn over layered shirring skirts embellished with chiffon and lace. Third, everyday street fashion style is blended with a formal, elegant fashion style. For example, the front view has a typical everyday appearance, whereas the back view contains florid and decorated details. The style is expressed as a 360-degrees appellation, with one thing in the front and another in the back. Sacai’s distinctive expressional characteristics include a mixed and de-constructive style characterized by unexpected design.

이상의 결과를 종합하면, 혼합유산균 2종(Bifidobacterium animalis ssp. Lactis Bf141와 Lactobacillus rhamnosus Lb102)의 섭취는 고지방식이 유도 비만 마우스에서 체중, 체지방, 제지방, 골밀도 등 주요 체성분에 영향을 주지 않았다. 혼합유산균은 식욕 조절 효과를 위해 측정한 사료 섭취량에도 영향을 주지 않았으며, 간 조직 무게에도 영향을 미치지 않았다. 인슐린저항성과 포도당신생합성의 주요 지표인 공복혈당량 또한 혼합유산균 급여에 의해 변화 하지 않았다. 또한 혼합유산균은 심혈관질환의 지표로 사용되는 혈중 중성지방 및 총 콜레스테롤에 영향을 주지 않았으며, 체내 지방의 소화 및 흡수율에서도 영향을 미치지 않았다. 결론적으로, 고지방식이유도 비만 마우스를 이용하여 혼합유산균(Bf141 + Lb102)의 항비만 생리활성 을 검증한 결과, 유의미한 물리적, 대사적 표현형 개선은 검증되지 않았다. 따라서, 추후 개별 보다 다양한 혼합 조건 및 농도로 연구를 설계하여 혼합유산균의 항비만 효과를 검증할 필요성이 있다.