섬유보강 시멘트계 복합재료 (이하 FRCC)는 균열 폭의 제어 등의 역학적인 효과뿐 아니라 철근방식에도 효과가 있는 것이 기존의 문헌으로부터 확인되고 있다. 본 연구에서는 아연섬유를 포함한 각종 금속섬유를 이용하여 철근의 방식효과를 부식 촉진 실험에 의해 검토했다. 더욱이 방식효과에 큰 영향을 미치는 염분침투, 희생양극 효과, 전기회로 형성에 주목하여, 각각의 요인에 있어서 검토를 실시했다. 그 결과, 금속섬유를 혼입한 FRCC의 방식효과를 확인할 수 있었으며, 특히 희생 양극효과가 높은 아연섬유의 경우, 염분침투 억제 효과가 뛰어나 내부식 성능이 향상되는 것을 확인할 수 있었다.

본 연구는 강섬유의 인장강도 및 형상비가 고강도 및 보통강도 강섬유보강 콘크리트(Steel fiber-reinforced concrete, SFRC)의 압축 및 휨 거동에 미치는 영향을 평가하기 위하여 실시되었다. 또한 본 연구에서는 가력속도에 따른 SFRC의 압축거동을 평가하였다. 이를 위해 총 4종류의 강섬유가 설계기준 압축강도 35 및 60 MPa급 SFRC에 각각 사용되었다. 압축거동 평가를 위해 지름 150 mm 및 높이 300 mm의 원주형 공시체를 사용하였으며, 단면 150×150 mm 및 지간 450 mm의 각주형 공시체를 사용하여 휨 거동 평가를 실시하였다. 실험결과 강섬유의 혼입은 콘크리트의 인성을 크게 향상시키는 것으로 나타났으며, 고강도 강섬유의 사용은 고강도 SFRC의 성능개선에 효과적인 것으로 나타났다. 아울러 본 연구에서는 SFRC의 휨 인성지수에 근거한 압축인성지수 산정기법을 제안하였다.

In this paper, fracture behavior of high-strength SFRC with high tensile strength steel fiber was investigated. Two different steel fibers with tensile strength of 1,200 and 1,600 MPa was used in SFRC specimens. Tst results showed that fracture behavior was more ductile with increasing the steel fiber tensile strength.

The purpose of this study was to evaluate the direct tensile fracture behavior of steel fiber hybrid reinforced cement composite by strain rate. Experiment result, it was confirmed that SSF suppressed the microcrack around the HSF at the strain rate 101/s, which resulted in the improvement of the pullout resistance of the HSF.

In this paper, finite element analysis of high-strength SFRC with high tensile strength steel fiber was investigated. Compressive and flexural behavior was ductile when using steel fiber tensile strength 1,600 MPa. Thorenfeldt and Trilinear models were used to describe the compressive and tensile behavior. Inverse analysis was performed to construct tensile model by evaluating flexural behavior. The flexural behavior of test results were similar to analysis results.

This study investigates the mechanical properties of SFRC reinforced by mixing different steel fibers with compressive strength of 70 MPa. In this study, The fiber aspect ratio consist of 60 and 80 and tensile strength is 1,100 MPa used. Cylindrical specimens with a ∅150×300 mm were made fo compression test, and prismatic specimens with a 150×150×550 mm were made fo flexural and direct shear tests. Test results show that the superior compression performance was observed in SFRC with Mixing different steel fibers.

This paper describes the effect of tensile strength and aspect ratio of fiber on compressive and flexural toughness index of high- and normal-strength steel fiber-reinforced concrete(SFRC). For this purpose, eight types of SFRC mixtures were made and tested. Test results indicate that the compressive and flexural toughness index of SFRC increased with increasing in tensile strength and aspect ratio of steel fiber.

In this study, the purpose of this study was to develop concrete structural walls including the functions of the barrier and EMP shielding performance as the concrete structure itself. Mix of highly challenging metal fibers in super-high strength concrete. The EMP measurement frequency was evaluated for EMP card performance using a waveguide measurement method in the range of 0.8 GHz to 1.0 GHz. Performance evaluation shows that steel fiber has an increased compression strength and shielding effect as amount of mixing increases. In addition, shielding performance increased due to the increased thickness of the specimen. Therefore, it is judged that steel fiber is a good blend for shielding effects.

This paper describes the effect of steel fiber volume fraction and aspect ratio on mechanical properties of SFRC with compressive strength of 40 MPa. In this study, The fiber volume fractions consist of 0.25%, 0.50% and 0.75% and aspect ratios are 64 and 80 used. The prisms with 150×150×550 mm were made and tested in accordance with EN-14651. Test results show that the superior flexural performance was observed in SFRC with higher fiber volume fraction and aspect ratio.

This paper presents the experimental results of flexural behavior of steel beam strengthened with Aramid fiber reinforced polymer plastic (FRP) strips subjected to static bending loading. Two H-beams were fabricated strengthened with aramid strips and one control specimen were also fabricated. Among of strengthened specimens, one specimen was strengthened with partial length of AFRP. From the test, it was observed that maximum increase of 16% was also achieved in bending-load capacity.

The purpose of this study is to compare the ultrasonic pulse velocity before and after core compression test of steel fiber reinforced concrete using the ultrasonic pulse velocity method. The correlation between the column member ultrasonic pulse velocity before core test, the column member ultrasonic pulse velocity after core test, and the compressive strength of the core specimen were analyzed by fabricating a steel fiber reinforced concrete hollow column member.

In this study, it evaluate the electromagnetic pulse shielding performance of fiber reinforced cement composite by Fiber type. Hooked-ended steel fiber, Smooth steel fiber and Amorphous metallic fiber were reinforced 2.0 vol.% in cement composites respectively. The electromagnetic pulse shielding performance was evaluated by MIL-STD-188-125-1.

The joints in this construction are formed through the bonding shear evaluation method during the placement of ultra-high-performance concrete (UHPC). The evaluation items include push-off tests for homogeneous UHPC + UHPC. The experimental samples comprised a monolithic placement as the baseline, two levels for the separated placement according to the compression strength of concrete, and five levels for the interface treatment. The bonding shear performance for the homogeneous UHPC + UHPC construction linearly increased with the width and depth of the grooves used for the interface treatment. The increase in the number of grooves and their cross-sectional areas only slightly influenced the bonding shear performance. The optimal interface treatment method for the homogeneous UHPC + UHPC construction grooves was at least 30 mm.

In this paper, the effect of steel fiber-reinforced cement composite (SFRCC) on damage resistance of steel tube member. Test results show that the cumulative energy dissipation of SFRCC specimen was about 14% higher than that of Con specimen.

In this study, the fiber blending ratio and strain rate effect on the tensile behavior of hybrid fiber reinforced cement composite was evaluated. Hooked steel fiber and polyvinyl alcohol fiber were used for reinforcing fiber. The fiber blending ratio of HSF+PVA were 1.5+0.5, 1.0+1.0 and 0.5+1.5vol.%. As a results, the tensile strength, strain capacity and fracture toughness of the hooked steel fiber reinforced cement composites were improved by the increase of the bond strength of the fiber and the matrix according to increase of strain rate. However, the tensile stress sharply decreased after the peak stress because of the decrease in the number of straightened pull-out fibers by micro cracks in the matrix around hooked steel fiber. On the other hand, PVA fiber showed cut-off fracture at strain rate 10-6/s with multiple cracks. However, at the strain rate 101/s, the multiple cracks and strain capacity were decreased because of the pull-out fracture of PVA fiber. The HSF1.5PVA0.5 shown the highest tensile strength because the PVA fiber suppressed the micro cracks in the matrix around the hooked steel fiber and improved the pull-out resistance of hooked steel fiber. Thus, DIF of strain capacity and fracture toughness of HSF1.5PVA were greatly improved. In addition, the synergistic response of fracture toughness was positive because the tensile stress was slowly decreased after the peak stress by improvement of the pull-out resistance of hooked steel fiber at strain rate 101/s

최근 소득 향상에 따른 레져 생활의 증가로 인해 해안가에 펜션, 리조트등 건축물을 많이 짓는 추세이다. 하지만 바닷가에 건물을 짓는다면 염분으로 인해 철근이 부식되어 건물의 내구성이 저하되기 때문에 이를 방지할 수 있는 새로운 콘크리트의 개발이 필요하다. 일반적으로 라텍스를 콘크리트에 혼입하게 되면 염분 및 수분의 침투에 대해 투수 저항성이 증가하고 수분증발 또는 흡수 등에 의한 건조수축 또는 팽창현상으로 인한 체적변화에 대해 안정성을 가지게 된다. 라텍스란 고무나무로부터 얻어지는 천연제품으로 반투명한 우유빛을 띠는 액체상태로서 콜로이드 같은 작은 구형의 유기체 폴리머입자가 물 속에 분산되어 있는 것을 말한다. 본 연구에 사용된 라텍스는 48%의 폴리머와 52%의 물로 구성된 Styrene-Butadiene계열이다. 라텍스는 유연성을 지니고 있고, 콘크리트 내부의 공극을 충진시켜주며 골재 주위에 필름막을 형성하지만 압축에 의한 파괴가 골재주위의 필름막에서 이루어져 라텍스 혼입률이 증가할수록 압축강도는 감소하는 것으로 판단된다. 이에 미세 강섬유를 보강 하면 콘크리트 내부에 국부적인 인장응력을 발생시켜 입자의 분산을 막아주기 때문에 압축강도가 개선된다. 따라서, 본 연구에서는 바닷가, 해안가에 사용이 가능하고 보통강도를 발현할 수 있는 콘크리트를 개발하고자 한다.

In this study, We evaluated the flexural behavior of high performance fiber reinforced cementitious composite (HPFRCC) with single steel fibers. to do this, we considered different types of steel fibers such as hooked, twisted and straight fibers. Test results indicated the flexural performance tends to increase as the incorporation rate of steel fiber increases and when the length of the fiber is long and at the high volume fractions(vf of 2.0) the flexural high performance was reduced.

In case of high performance fiber reinforced cementitious composite(HPFRCC) specimens with steel fiber of 30mm they exhibited poorer flexural strength than the straight fibers at a higher than 1.5% compared to steel fiber of 13mm and 19.5mm. In this study, Therefore we evaluated the flexural strength and cracking behavior of HPFRCC with steel fiber type such as fiber length, volume fraction.

This paper describes the flexural characteristic of high strength steel fiber reinforced concrete (SFRC) prisms with different fiber tensile strength. All mixtures have specified compressive strength of 80 MPa and fiber volume fraction of 0.5% and 1.0%. In accordance with EN-14651, SFRC prisms were made and tested under bending loading. Test results indicated that steel fiber has no significant effects on compressive behavior of SFRC. However, flexural behavior of high strength SFRC was improved considerably with increase of fiber tensile strength.

최근 거푸집 작업과 철근 배근 공정을 생략하여 공정의 단순화를 통한 공기단축 합성 슬래브 시스템의 개발 연구가 진행 중이다. 이 연구에서는 구조용 데크플레이트를 활용하여 거푸집 및 인장철근의 배근을 대체하고 강섬유보강 콘크리트를 사용하여 온도철근의 역할을 대 체하는 단순슬래브 시스템의 장기거동을 평가하는 것이 목적이다. 구조용 데크플레이트를 활용하는 기존 합성슬래브 공법은 건조수축에 의한 균열 제어를 위해 용접 철망을 배근하는 것이 일반적이나, 이는 균열을 억제하는 데 효과적이지 못한 것으로 선행연구들에서 지적되었다. 본 연구에서는, 일반적인 건축물의 하중 조건으로 제작 된 연속 두 경간을 갖는 강섬유보강 데크플레이트 슬래브의 장기적인 균열 및 처짐 거동을 평가하도록 하였다. 실험 결과, 실험체의 비 내력부에서는 장기균열의 개수 및 폭이 현저하게 감소하는 것으로 나타나 강섬유보강 콘크리트의 건조수축과 균열 제어 성능이 우수한 것으로 평가되었으며,,처짐량도 강섬유보강 데크플레이트 슬래브가 우수한 것을 확인하였다. 다만, 부모 멘트가 작용되는 슬래브 연속단부에서는 사용하중 단계에서 균열폭을 제어하고 하중 제거 시 처짐을 회복하기 위한 디테일의 적용이 필요한 것으로 분석되었다.