Aluminum foam has many superb properties such as light weight, impact absorption and thermal resistance by comparing with original metallic materials. Composite materials made of aluminum foam have used at various fields as automotive bumper, shock absorption, vessel and aircraft. But it is inefficient to join aluminum foam with bolt and nut because of the property of light weight. In this study, this approach is investigated by joining aluminum foam with adhesive. Impact fatigue and failure toughness at the commissure of adhesive structure are studied by simulation analysis. This study aims to investigate the shear strength evaluation at shear mode of adhesively bonded joint with double cantilever beam(DCB) made of aluminum foam.

Abstract
 1. 서론
 2. 해석모델 및 구속 조건
  2.1 해석모델
  2.2 경계설정
 3. 해석결과
  3.1 t=25mm에 대한 해석 결과
  3.2 t=50mm에 대한 해석 결과
  3.3 t=75mm에 대한 해석 결과
  3.4 t값에 대한 변위-반력 그래프 비교
 4. 결론
 후기
 참고문헌

• 조호선(공주대학교 기계공학과 대학원) | H. S. Cho
• 조재웅(공주대학교 기계자자동차공학부) | J. U. Cho 교신저자