In this article, to predict the wear amount of nano particles in a worn nano composite, computational analysis pre/post-processor were developed using ABAQUS and visual basic programs. The abrasion, which is one of nano particles release scenarios, was applied in the computational analysis. Moreover, reciprocation, which is the abrasion type, was selected and incarnated in abrasion computational analysis. Also, to predict wear amount of nano composite in computational analysis, archard equation was applied and the predicted wear amount was evaluated compare with experimental value. The predicted wear amount of nano composite was increased in accordance with increasing force and was similar to result of experimental value.

Abstract
 1. 서론
 2. ABAQUS를 이용한 전산해석
  2.1 나노입자의 노출량 예측을 위한 마모해석 모델링
  2.2 나노 입자의 노출량 예측을 위한 왕복동 마모해석 구현
 3. ABAQUS 기반의 전처리와 후처리 기술 개발
  3.1 ABAQUS 기반의 마모해석을 위한 전처리기 개발
  3.2 ABAQUS 기반의 마모량 계산을 위한 후처리기 개발
  3.3 개발된 전/후처리기를 이용한 마모량 예측
 4. 결론
 후 기
 References

• 조용상(원광대학교 기계공학과(원)) | Yong Sang Cho
• 이세환(원광대학교 기계공학과(원)) | Se-Hwan Lee
• 김재현(한국기계연구원 나노융합·생산시스템연구본부) | Jae-Hyun Kim
• 조영삼(원광대학교 공과대학 기계자동차공학부) | Young-Sam Cho Corresponding Author