Fiber reinforced plastic (FRP) structural shapes are readily available in civil engineering applications. Among many manufacturing techniques used for FRP structural shapes, pultrusion process is one of the most widely used techniques in civil engineering applications. Pultrusion is a manufacturing process for producing continuous lengths of reinforced polymeric plastic structural shapes with constant cross-section. Pultruded composites are attractive for structural applications because of their continuous mass production with excellent mechanical properties. This paper presents the results of investigations pertaining to the bolted connection with two bolts for the pultruded FRP (PFRP) structural members. PFRP bolted connection tests were conducted with end distance to bolt diameter ratio (e1/db) and two types of bolt pattern such as horizontal (Pattern A) and vertical arrangement (Pattern B). As a result, it is found that the e1/db is recommended as the ratio of 4. In addition, it is also found that the bearing strengths at failure of the Pattern A and Pattern B have a similar value.

1. 서 론
2. PFRP 볼트연결부 실험
3. PFRP 볼트연결부 실험 결과 및 분석
4. PFRP 볼트연결부 실험 결과분석
5. 결 론
References

• 이영근(홍익대학교 토목공학과 박사후연구원) | Lee, Young-Geun
• 김선희(홍익대학교 토목공학과 박사과정) | Kim, Sun-Hee
• 원용석(홍익대학교 토목공학과 박사과정) | Won, Yong-Seok
• 천진욱(홍익대학교 토목공학과 박사과정) | Cheon, Jin-Uk
• 신광열(홍익대학교 토목공학과 겸임교수) | Shin, Kwang-Yeoul
• 윤순종(홍익대학교 토목공학과 교수) | Yoon, Soon-Jong Corresponding author