논문 상세보기

이온 주입법을 이용한 ZnO 박막의 As 도핑 KCI 등재 SCOPUS

Arsenic Doping of ZnO Thin Films by Ion Implantation

  • 언어KOR
  • URLhttps://db.koreascholar.com/Article/Detail/315614
구독 기관 인증 시 무료 이용이 가능합니다. 4,000원
한국재료학회지 (Korean Journal of Materials Research)
한국재료학회 (Materials Research Society Of Korea)
초록

ZnO with wurtzite structure has a wide band gap of 3.37 eV. Because ZnO has a direct band gap and a large exciton binding energy, it has higher optical efficiency and thermal stability than the GaN material of blue light emitting devices. To fabricate ZnO devices with optical and thermal advantages, n-type and p-type doping are needed. Many research groups have devoted themselves to fabricating stable p-type ZnO. In this study, As+ ion was implanted using an ion implanter to fabricate p-type ZnO. After the ion implant, rapid thermal annealing (RTA) was conducted to activate the arsenic dopants. First, the structural and optical properties of the ZnO thin films were investigated for as-grown, as-implanted, and annealed ZnO using FE-SEM, XRD, and PL, respectively. Then, the structural, optical, and electrical properties of the ZnO thin films, depending on the As ion dose variation and the RTA temperatures, were analyzed using the same methods. In our experiment, p-type ZnO thin films with a hole concentration of 1.263 × 1018 cm−3 were obtained when the dose of 5 × 1014 As ions/cm2 was implanted and the RTA was conducted at 850 oC for 1 min.

목차
1. 서 론
 2. 실험 방법
 3. 결과 및 고찰
 4. 결 론
 References
저자
  • 최진석(금오공과대학교 신소재공학부) | Jin Seok Choi
  • 안성진(금오공과대학교 신소재공학부) | Sung Jin An