논문 상세보기
pp.371-381
The present study investigated the effects of processing parameters such as time (10, 20, 30, 40 min), pressure (25, 50, 75, 100 MPa), and the salinity of brine (0~10%(w/v)) on jacopever (Sebastes schlegeli Hilgendorf) in order to establish optimization of the three factors using a high hydrostatic pressure (HHP) machine. To do so, it analyzed the quality characteristics of volatile basic nitrogen (VBN), trimethylamine (TMA), total bacterial counts, dynamic viscoelasticities, and differential scanning calorimetry (DSC) properties. First, when the time increased to 40 mins, by 10 min intervals, the total bacterial counts in HHP groups under 25℃, 100 MPa, and 4%(w/v) brine were significantly decreased except for the first 10 min in comparison to the control group. In regards to DSC properties, the onset temperature (TO) of the first endothermal curve was significantly reduced. Second, when the pressure level increased up to 100 MPa by 25 MPa increments, the total bacterial counts in the HHP samples significantly decreased for 20 min at 50 MPa or higher. As the pressure increased, G′, G″ and the slope of tan δ decreased (except for 50 MPa). Third, in regards to the salinities of brine, when the HHP processing was treated at 100 MPa, 25℃ for 20 min, the total bacterial counts of all the HHP groups significantly decreased in comparison to those of the control group. A significant difference was found in the enthalpy of the second endothermic curve in the 6~10%(w/v) (except 7%(w/v)) HHP groups. Therefore, the salinity of the immersion water under the HHP condition was appropriate when it was lower than 6%(w/v). The present study demonstrated that the optimum parameter condition according to/under the condition of the microbial inhibition and economic effects using an HHP would be the reaction time for 20 min, reaction pressure at 100 MPa, and the salinity of 4%(w/v) brine.
재료 및 방법
1. 실험 재료 및 처리 방법
2. 시료 제조
3. 외관과 일반성분
4. 염도
5. 휘발성 염기 질소(VBN)와 트리메틸아민(TMA) 함량
6. 총균수
7. 동적점탄성 특성
8. 근육단백질의 DSC 열전이 특성
9. 통계처리
결과 및 고찰
1. 외관과 일반성분
2. 침지수의 염도에 따른 고압 처리시료의 염도
3. 휘발성 염기 질소(VBN)와 트리메틸아민(TMA) 함량
4. 총균수
5. 동적점탄성 특성
6. DSC 열전이 특성
요약 및 결론
References
