논문 상세보기

소독부산물 생성에 미치는 물리화학적인 인자 영향 KCI 등재

The Effect of Physical Chemistry Factors on Formation of Disinfection by-products

  • 언어KOR
  • URLhttps://db.koreascholar.com/Article/Detail/363583
서비스가 종료되어 열람이 제한될 수 있습니다.
한국환경과학회지 (Journal of Environmental Science International)
한국환경과학회 (The Korean Environmental Sciences Society)
초록

This research studied the effect of factors that are able to form disinfection by-products (DBPs) of chlorination, including natural organic matter (NOM) with sewage, bromide ions, pH and contact time. Trihalomethane (THMs) yield of 0.95 μmol/㎎ was higher than other DBPs yield for the chlorinated humic acid samples. THMs yield of sewage sample was 0.14 μmol/㎎ and haloacetonitriles (HANs) yield in the sewage samples were 0.13 μmol/㎎ but only 0.02 μmol/㎎ for the humic acid samples. As the concentration of bromide ions increased, brominated DBPs increased while chlorinated DBPs decreased, because bromide ions produce brominated DBPs. THMs were highest (55.55 ㎍/L) at a pH of 7.9 and haloacetic acids (HAAs) were highest (34.98 ㎍/L) at a pH of 5. Also THMs increased with increasing pH while HAAs decreased with increasing pH. After chlorination, the rate of THMs and HAA formation are faster at initial contact time and then reaches a nearly constant value after 24 hours. This study considers ways to reduce DBP formation by chlorination.

저자
  • 정용(연세대학교 의과대학 예방의학교실) | Chung Yong Corresponding Author
  • 김준성(메사추세츠 주립대학 환경공학과) | Jun-Sung Kim