This study investigates strength of unstiffened flanges in horizontally curved box girders under different curvature by using Abaqus 6.13 which is finite element method program. When horizontally curved girder is subjected to simple vertical load, bending moment and torsional moment occur at the same time different from straight girder. This torsional moment cause torsion and distortion on box section. Because of such phenomenon, longitudinal stress is non-uniformly distributed on flange of curved box girder. Non-uniformely distributed stress make strength of flange lower. Although demand of curved girder is increasing due to complexification of urban, it is only AASHTO(2012) that has certification for curved girder. But equation for curved girder in AASHTO(2012) neglect almost of curvature effect. Box girder is usually used for curved girder due to their superb torsional properties. So, we need more study for strength of curved box girder flange.

ABSTRACT
 1. 서 론
 2. 논문 작성 방법
  2.1 AASHTO(2012) 분석
  2.2 해석 모델
  2.3 결과 및 분석
  2.4 소결
 References

• 변남주(고려대학교 사회환경시스템공학과) | Byun Nam-Joo
• 이기세(고려대학교 사회환경시스템공학과) | Lee Kee Sei
• 강영종(고려대학교 사회환경시스템공학과) | Kang Young Jong