In this study, flow characteristic of small vertical-axis wind turbine was performed to analysis the numerical analysis. Blade geometry in the wind turbine is NACA 6512-43, and various degrees of the wind turbine accelerator were adopted. Numerical models are used for the analysis with CFD program of Ansys fluent and RNG k-e turbulence model was used. Rotational speed value of the wind turbine in analysis condition were obtained by the experiment. When the wind turbine accelerator is equipped, exit velocity of wind turbine accelerator tended to increases. Also RPM of wind turbine is increase. And maximum RPM appeared that wind turbine accelerator in degree 60° is equipped.

Abstract
 1. 서론
 2. 전산 해석 기법
  2.1 터빈형상 및 전산 해석 모델
  2.2 격자생성
  2.3 해석조건
 3. 해석결과 및 실험
  3.1 해석결과
  3.2 실험
 4. 결론
 References

• 허진석(원광대학교 기계공학과) | Jin-Seok Heo
• 김현아(원광대학교 기계공학과) | Hyun-Ah Kim
• 국민호(원광대학교 기계공학과) | MIn-Ho Kook
• 전필수(원광대학교 기계공학과) | Pil-Soo Jeon
• 국성규(원광대학교 기계공학과) | Sung-Kyu Kook
• 이상호(원광대학교 기계자동차공학부) | Sang Ho Lee 교신저자