The mesophase pith was synthesized based on effects of a high-pressure thermal condensation and feed (PFO/FCC-DO) blending. The reaction conditions were designed by fluidity and reactivity of each feed during the thermal reaction. The high-pressure thermal condensation process disturbs distillation of the volatile compounds in pyrolysis fuel oil (PFO); the fluidity can be controlled. In the blending process, PFO, which has a high thermal condensation reactivity, and fluid catalytic cracking-decant oil (FCC-DO), which maintains fluidity, interacted with a synergistic effect. Thus, mesophase pitch with a large mesophase content was manufactured by the two above processes.

Effects of pressure-controlled reaction and blending of PFO and FCC-DO for mesophase pitch
    Abstract
    1 Introduction
    2 Experimental
        2.1 Materials used
        2.2 Experiments
        2.3 Characterization
            2.3.1 Chemical classification
            2.3.2 Thermal analysis
            2.3.3 Polarization microscopy
    3 Results and discussion
        3.1 Characteristics of PFO and FCC-DO
        3.2 Thermal condensation properties of PFO and FCC-DO
        3.3 Characteristics of mesophase formation in PFO and FCC-DO
        3.4 Effects of high-pressure thermal condensation and feed blending based on thermal behavior
        3.5 Characteristics of mesophase formation in the prepared samples
    4 Conclusion
    Acknowledgements 
    References

• Ji Hong Kim(Carbon Industry Frontier Research Center, Korea Research Institute of Chemical Technology (KRICT)/Department of Chemical and Biological Engineering, Korea University)
• Jong Gu Kim(Carbon Industry Frontier Research Center, Korea Research Institute of Chemical Technology (KRICT)/Department of Applied Chemistry and Biological Engineering, Chungnam National University)
• Ji Sun Im(Carbon Industry Frontier Research Center, Korea Research Institute of Chemical Technology (KRICT)/University of Science and Technology (UST))
• Ki Bong Lee(Department of Chemical and Biological Engineering, Korea University)