논문 상세보기
pp.451-456
압출성형 공정변수(배럴온도, 수분함량) 및 포장방법과 저장기간에 따른 압출성형 매트릭스 내부 비타민 C 함량변화와 손실속도상수를 분석하였다. 압출성형 매트릭스는 배럴온도(80, 90, 100 및 )와 수분함량(25, 30%)을 각각 조절하여 제조하였다. 비타민 C 함량은 배럴온도가 에서 로 증가할수록 감소하였고 수분함량이 25%에서 30%로 증가할수록 감소하였다. ON 필름진공포장과 LDPE 플라스틱필름포장 모두 배럴온도와 수분함량이 증가할수록
The vitamin C content in extruded comstarch matrix was shown to depend on extrusion process variables (barrel temperature and water content), the packaging method, and the storage period. In addition, loss rates of vitamin C under different processing conditions were calculated. Extrusion process variable were barrel temperature ( and ), and water content (25% 30% both w/w). The vitamin C content decreased as barrel temperature increased from to and water content increased from 25% to 30% when either LDPE plastic film packaging or ON film vacuum packaging were employed. As barrel temperature and water content increased, vitamin C decreased in comstarch packed in either LDPE film or ON film. As temperature increased, vitamin C loss rate increased under both packaging conditions, but the loss tate was only 50% of the LDPE film packaging rate when ON film vacuum packaging was used. In conclusion, the higher the temperature, and the greater the water content, the less vitamin C was inactivated during extrusion cooking, although the loss rah of vitamin C became faster as temperature and water content rose. In conclusion, extrusion process could be applied for making vitamin C matrix to extend vitamin C preservation.
