논문 상세보기

PTR-ToF-MS를 이용한 국내 산업업종별 휘발성유기화합물 배출특성 연구 KCI 등재

Source characterization of volatile organic compounds of industrial complex measured by proton-transfer-reaction time-of-flight mass spectrometers in Korea

  • 언어KOR
  • URLhttps://db.koreascholar.com/Article/Detail/423361
구독 기관 인증 시 무료 이용이 가능합니다. 4,600원
실내환경 및 냄새 학회지 (Journal of Odor and Indoor Environment)
한국냄새환경학회 (Korean Society Of Odor Research And Engineering)
초록

We used the measurement data derived from a proton transfer reaction time-offlight mass spectrometry (PTR-ToF-MS) to ascertain the source profile of volatile organic compounds (VOCs) from 4 major industrial classifications which showed the highest emissions from a total of 26 industrial classifications of A industrial complex. Methanol (MOH) was indicated as the highest VOC in the industrial classification of fabricated metal manufacture, and it was followed by dichloromethane (DM), ethanol (EN) and acetaldehyde (AAE). In the industrial classification of printing and recording media, the emission of ethylacetate (EA) and toluene (TOL) were the highest, and were followed by acetone (ACT), ethanol (EN) and acetic acid (AA). TOL, MOH, 2-butanol (MEK) and AAE were measured at high concentrations in the classification of rubber and plastic manufacture. In the classification of sewage, wastewater and manure treatment, TOL was the highest, and it was followed by MOH, H2S, and ethylbenzene (EBZ). In future studies, the source profiles for various industrial classifications which can provide scientific evidence must be completed, and then specified mitigation plans of VOCs for each industrial classification should be established.

목차
1. 서 론
2. 연구 방법
    2.1 측정 대상 업종 및 시료채취
    2.2 채취 시료의 VOCs 농도 분석
    2.3 업종별 VOCs 배출량 산정 및 배출원 목록
3. 연구결과 및 고찰
    3.1 A 산업단지의 VOCs 배출량
    3.2 업종별 VOCs 특성
    3.3 금속 가공제품 제조업종의 VOCs 배출 특성
    3.4 인쇄 및 기록매체 업종의 VOCs 배출 특성
    3.5 고무 및 플라스틱제품 제조업종의 VOCs 배출 특성
    3.6 하수, 폐수 및 분뇨처리업종의 VOCs 배출 특성
4. 결 론
감사의 글
저자
  • 오병훈(안양대학교 환경공학과, 에이피엠엔지니어링) | Byeong-Hun Oh (Department of Environmental Engineering, Anyang University, APM Engineering)
  • 김혜승(안양대학교 환경공학과) | Hye-Seung Kim (Department of Environmental Engineering, Anyang University)
  • 이혜민(안양대학교 환경공학과) | Hye-Min Lee (Department of Environmental Engineering, Anyang University)
  • 이춘상(안양대학교 환경공학과) | Chun-Sang Lee (Department of Environmental Engineering, Anyang University)
  • 김경찬(안양대학교 환경공학과) | Kyong-Chan Kim (Department of Environmental Engineering, Anyang University)
  • 최다영(안양대학교 환경공학과) | Da-Yeong Choi (Department of Environmental Engineering, Anyang University)
  • 주흥수(안양대학교 환경공학과) | Hung-Soo Joo (Department of Environmental Engineering, Anyang University)
  • 한진석(안양대학교 환경공학과) | Jin-Seok Han (Department of Environmental Engineering, Anyang University) Corresponding Author