논문 상세보기
THM Coupled Behavior of FE Experiment in Task C of the DECOVALEX-2023
- 언어ENG
- URLhttps://db.koreascholar.com/Article/Detail/430430
p.142
Geologic disposal of high-level radioactive waste is considered the most effective method to isolate high-level radioactive waste from the biosphere. A high-level radioactive waste repository is designed to be placed at a deep depth and generally consists of canisters, buffer material, and host rock. In the disposal system, the heat from the canister occurs for millions of years due to the long half-life of the high-level radioactive waste, and the heat induces vaporization of groundwater in the buffer material. The resaturation process also occurs due to groundwater inflow from the host rock by the hydraulic head and capillarity. The saturation variation leads to the heat transfer and multi-phase flow in the buffer material, and thermal pressurization of groundwater due to the heat affects the effective stress change in the host rock. The stress change can make the porosity and permeability change in the flow system of the host rock, and the flow system affects the nuclide migration to the biosphere. Therefore, it is crucial to understand the complex thermo-hydro-mechanical-chemical (THMC) coupled behavior to secure the repository’s long-term safety. DECOVALEX is an international cooperating project to develop numerical methods and models for predicting the THMC interactions in the disposal systems through validation and comparison with test results. In Task C of DECOVALEX-2023, nine participating groups (BGR, BGE, CAS, ENSI, GRS, KAERI, LBNL, NWMO, Sandia) models the full-scale emplacement (FE) experiments at the Mont Terri underground rock laboratory and focus on understanding pore pressure development, heat transfer, thermal pressurization, vaporization and resaturation process in the disposal system. In the FE experiment, three heaters generated heat with constant power for five years at a 1:1 scale in the emplacement tunnel based on Nagra’s reference repository design. KAERI used OGS-FLAC3D for the numerical simulation, combining OpenGeoSys for TH simulation and FLAC3D for M simulation. We generated a full-scale three-dimensional numerical model with a dimension of 100 by 100 by 60 meters. The pressure and temperature distribution were well simulated with the host rock's anisotropy. Based on the capillarity, we observed vaporization and resaturation in the bentonite under the twophase flow system. We plan to compare the simulation results with the field data and investigate the effect of input parameters, including thermal conductivity and pore compressibility affecting the thermal and flow system.
