In KAERI, the nuclide management technology is currently being developed for the reduction of disposal area required for spent fuel management. Among the all fission products of interest, Cs, I, Kr, Tc are considered to be significantly removed by following mid-temperature and hightemperature treatment, however, a difficulty of real spent-fuel thermal treatment experiment limits the development of such thermal treatment. The test employing SimFuel (Simulated Spent Fuel) can be an alternative for such condition, however, the fabrication of SimFuel containing semivolatile species such as Cs, I and Re (substitute for Tc) was not achieved for conventional sintering method since such species are easily removed during hot temperature treatment. In this study, for the prevention of volatilization of such species and the inclusion of semi-volatile species in fabrication of SimFuel, argon-based high pressurizing up to Max 100 bar was considered to be applied in high temperature treatment. For this, lab-scale hot-isostatic press applicable up to 1,500°C was fabricated and is being waiting for the approval for high-pressure test. After approval of license, UO2 baesd SimFuel containing CsI will be fabricated and its micro-structure and composition will be evaluated through SEM-EDX and XRD

• Ju Ho Lee(Korea Atomic Energy Research Institute (KAERI)) Corresponding author
• Jae-Won Lee(Korea Atomic Energy Research Institute (KAERI))
• Sun-Seok Hong(Korea Atomic Energy Research Institute (KAERI))
• Jae-Sun Han(Korea Atomic Energy Research Institute (KAERI))
• Chang Hwa Lee(Korea Atomic Energy Research Institute (KAERI))