Among nuclear power plants in the Republic of Korea, Kori Unit 1 and Wolsong Unit 1 have been permanently shut down, and Kori Unit 1 is preparing to be decommissioned. According to the decommissioning plan (DP) of Kori Unit 1, a radioactive waste processing complex will be built on the Kori site to reduce radioactive waste generated during decommissioning actively, and various types of decommissioning waste are expected to be treated in the complex. It is judged that matters related to the safety assessment of the complex are not included in the DP since the equipment and treatment processes have not been determined. IAEA GSR Part 5 states that radioactive waste processing complex shall be operated according to national regulations and the conditions imposed by the regulatory body. However, it has been confirmed that separate regulatory requirements for the complex have not yet been established in Korea. It is expected that the Regulation on Technical Standards for Nuclear Facilities, etc. will be applied mutatis mutandis. Liquid and gaseous radioactive materials can be expected to be released into the sea or atmosphere during the operation of the complex. Accordingly, it should be proved that standards such as discharge limits of radioactive effluents are met. Although the assessment of radioactive effluent discharged from nuclear power plants to the environment is systematically conducted, it has been confirmed that the safety assessment framework for radioactive effluents discharged from the complex has not yet been established. Currently, the SAFRAN Tool is based on SADRWMS (Safety Assessment Driving Radioactive Waste Management Solutions), an IAEA safety assessment methodology for pre-disposal management, which uses Pathway Dose Factors (PDFs) derived from generic environmental models. Therefore, in order to conduct a more detailed safety assessment of the complex on a specific site, site characteristic data should be reflected. Although safety assessment using the SAFRAN Tool was conducted at the Thailand Institute of Nuclear Technology (TINT) facility, detailed data were not provided, and PDFs reflecting site characteristic data were not applied. Also, no other studies that considered many types of waste and provided detailed data on the safety assessment were not confirmed. Therefore, this study developed K-CRAFT (Kyung Hee – Comprehensive RAdioactive waste treatment Facility safety assessment Tool), this tool that can derive PDFs by reflecting site characteristic data based on the SADRWMS methodology and conducted preliminary safety assessment for the complex which will be built in Kori site by this tool.

• In Gyu Chang(Kyung Hee University)
• Jae Hak Cheong(Kyung Hee University) Corresponding author