The radioactive waste generated within radiation-controlled areas is classified and processed according to relevant laws and regulations based on contamination levels. In cases where such radioactive waste complies with the legally defined clearance concentration or dose criteria, it is disposed of as non-radioactive waste by means of incineration, reclamation, recycling, etc. Within radiation controlled areas, various consumables are periodically replaced to ensure the proper operation of the area. It is necessary to have appropriate disposal methods for these consumables. In particular, waste items such as fire extinguishers, fluorescent lamps, batteries, and pressure vessels (hereinafter referred to as “Special Waste Type”), which may contain hazardous substances within their internal components and contents, should be considered for appropriate disposal methods that comply with nuclear safety and environmental laws. In the present case, the specified special waste type do not come into direct contact with radiation sources, and they have impermeable surfaces, which significantly reduces the risk of external contamination infiltrating the interior. However, the current method of clearance is not suitable for these items (Typically, nuclear energy-related business operators are required to classify clearance target waste based on internal and external components and demonstrate compliance with the criteria. Nevertheless, for special waste type, it is difficult to separate and measure internal and external components within the radiation-controlled area). In this case, the Clearance Procedure for special waste type applied to Korea Atomic Energy Research Institute was introduced. Additionally, we have extracted considerations for future domestic clearance of the type.

• Jihye Son(Korea Atomic Energy Research Institute (KAERI)) Corresponding author
• TaeHyoung Kim(Korea Atomic Energy Research Institute (KAERI))
• Cheolhyun Kang(Korea Atomic Energy Research Institute (KAERI))