논문 상세보기
A Review on the Linkage of Input Data for the Development of FDP at the Decommissioning Nuclear Power Plant
p.349
The decommissioning of domestic Nuclear Power Plants (NPPs) in Korea is expected to begin with the Kori-1, which was permanently shutdown in 2017. In addition, Wolsong-1 has been also permanently shutdown, and another type will be the decommissioning project following Kori-1. KHNP is promoting operation and decommissioning projects as the owner of NPPs, and the Central Research Institute (CRI) has been developing a Final Decommissioning Plan (FDP) for the decommissioning license document. The FDP consists of 11 major chapters in the order of overview of the project, characteristic evaluation, safety assessment, radiation protection, decontamination & dismantlement activities, waste management, etc. The contents described in each chapter are individual chapters, but there are also parts that consider the connection with other chapters. The CRI, which develops the FDP for the first decommissioning project in Korea, has spent a lot of time and effort considering this and has been proceeding through trial and error until the present stage. Therefore, this study aims to explain the current status of FDP, a license document for domestic decommissioning projects, and the link between major input data in major chapters. It can be said that System, Structure, and Components (SSCs) subject to dismantling are considered as the scope of FDP. Chapters that perform estimations on these dismantling targets may include safety assessments, exposure dose assessments for workers and residents, and waste inventory assessments. Therefore, an important part of performing the estimation works is to consider the entire scope of decommissioning activities, and as a way, it can start from data based on the inventory data. After generating the inventory data, the waste treatment classification for the inventory is designated by reflecting the results of the characterization. In addition, for cost estimation, the cost of decommissioning project is predicted by inputting some data (i.e., UCF) such as work process, number of workers, and time required for each item with data reflected in quantity and characterization. After that, based on these inventory, characterization, and UCF data, accident scenarios and industrial safety evaluation are performed for the safety assessment. The worker exposure dose is estimated by considering the dose rate of the workspace with these data. In the case of the amount of waste, the final amount of waste is estimated by considering the factors of reduction and decontamination. In summary, the main estimation contents of FDP are evaluated by adding elements required for the purpose of each chapter from data combined with inventory, characterization, and UCF, so the contents of these chapters are based on the logic of considering the entire scope of decommissioning in common.
