논문 상세보기
pp.433-439
WAAM(Wire Arc Additive Manufacturing) has gained attention as an innovative technology in small-batch, multi-product production due to its advantages of low production costs, rapid build rates, and design flexibility. However, challenges such as relatively low geometric accuracy, surface finish defects, residual stresses, and distortion due to high heat input persist and require improvement. This study analyzes the influence of deposition path angles on deposition performance in the WAAM process. Experiments were conducted using stainless steel (STS309MoL) wire, known for its excellent heat resistance and corrosion resistance due to its relatively high ferrite content within the austenitic structure. To mitigate residual stresses and distortion caused by high heat input, the CMT(Cold Metal Transfer) process was employed for five layers of deposition. Five different deposition path angles were selected as process variables, and the impact of deposition path angles on deposition performance was evaluated based on experimental results.
