논문 상세보기

정수장에서 미세플라스틱 분포 특성 KCI 등재

Characteristics of microplastics distribution at water treatment plants

  • 언어KOR
  • URLhttps://db.koreascholar.com/Article/Detail/437540
구독 기관 인증 시 무료 이용이 가능합니다. 4,000원
상하수도학회지 (Journal of the Korean Society of Water and Wastewater)
대한상하수도학회 (Korean Society Of Water And Wastewater)
초록

The number, size, and material distribution of microplastics (MPs) sized 20-200 μm in the raw water and water treatment processes were analyzed using FT-IR in three water treatment plants in Jeju Province. The number of MPs was detected at 0.075-0.620 MP/L in raw water and 0.040-0.047 MP/L in filtered water, which is relatively lower than the results of other studies. Regarding the size of the MPs, particles sized 20-50 μm in both the raw water and the treated water accounted for the highest proportion, representing 65.6% and 56.3% of the total, respectively. In terms of MP type distribution, polypropylene (PP) was identified as the main type at 58.7%. In the water purification process, the MPs removal efficiency was the highest at 93.5% in the sedimentation and rapid filtration process, followed by 58.4% in membrane filtration and 40.0% in slow filtration. Continuous monitoring of the distribution of MPs in raw water and water treatment processes is recommended.

목차
ABSTRACT
1. 서 론
2. 연구대상 및 방법
    2.1 연구대상
    2.2 연구방법
3. 결 과
    3.1 미세플라스틱 개수 분포
    3.2 미세플라스틱 크기 분포
    3.3 미세플라스틱 유형 분포
    3.4 정수처리 공정별 미세플라스틱 분포
4. 결 론
사 사
References
저자
  • 문승리(제주대학교 환경공학과) | Seungri Moon (Department of Environmental Engineering, Jeju National University)
  • 김진근(제주대학교 환경공학과) | Jinkeun Kim (Department of Environmental Engineering, Jeju National University) Corresponding author