본 연구에서는 온대산재 및 남양재 원목을 표층재로하고, 금속, 유리섬유, 탄소섬유로 보강한 코르크 보드를 중층에 배열한 코르크 복합 원목마루판 의 치수안정성을 평가하였다. 표층재에 따른 코르크 복합 원목마루판의 평균 흡수율은 백합나무(Tu)가 6.1%로 가장 높은 값을 나타내었고, 티크와 멀바우가 4.7%로 가장 낮은 값을 나타내었으며, 밀도가 낮은 온대산재를 배열한 원목마루판보다 남양재에서 낮은 값을 나타내는 것이 확인되었다. 중층보강재는 CM (cork board-metal) 타입이 CG (cork board-glass fiber) 및 CC (cork board-carbon fiber)타입에 비하여 높은 흡수율을 나타내어 밀도에 따른 흡수량의 차이가 확인되었다. 표층 수종에 따른 흡수두께팽창률은 백합나무가 7.2%로 가장 높은 값을, 티크(T)가 3.9%로 가장 낮은 값을 나타내었다. 전반적으로 금속 보강 원목마루판(CM)의 흡수두께팽창률은 유리섬유(CG)와 탄소섬유(CC)에 비하여 금속이 2–3배 높은 값을 나타내었다. 금속 보강 원목마루판을 제외한 모든 원목마루판은 목질 마루판에 관한 KS 규격 기준을 충족하는 우수한 치수안정성을 나타내는 것이 확인되었다.
This study conducted the dimensional stability of cork composite wood flooring panels composed of four species of two temperate and two tropical woods as face layers and cork boards reinforced with metal, glass fiber, or carbon fiber as the core layer. In comparison with the face layer wood species, the average water absorption rate of the tulip tree (Tu) showed the highest value (6.1%), and teak (T) and merbau (M) showed the lowest value (4.7%). It showed that the wood flooring composed of the tropical wood species had lower water absorption rate than that of the temperate wood species with low-density. Among the core reinforcements, the CM (cork board-metal) type showed a higher water absorption rate than the CG (cork board-glass fiber) and CC (cork board-carbon fiber) types because of the differences in absorption amount depending on density. Among the face layer species, the flooring with tulip tree showed the highest thickness swelling rate (7.2%), and teak (T) showed the lowest value (3.9%). Overall, the thickness swelling rate of the CM (cork board-metal) type of wood flooring was 2 - 3 times greater than that of the CG (cork board-glass fiber) and CC (cork board-carbon fiber) type of wood flooring. All types of wood flooring without the wood floorings with CM type showed excellent dimensional stability below the KS standards.