논문 상세보기
pp.21-26
It is essential to develop the shield for the extraction of high quality neutron beam and safe work at the sample position. The aim of this study is design, fabrication and filling of the shield in domestic. In consideration of ST-3 beam port of HANARO, we designed the reflectometer shield composed of 14 blocks and fabricated it shield casemate. Through the assembly and quality test of the shield casemate, we established the method of fabrication for neutron beam path and channel. In order to increase shield capacity, we filled shield casemate with heavy concrete, lead ingot and polyethylene that mixed B4C powder and epoxy. The average density of the filled heavy concrete was 4.7g/cm3, which can protect neutron and gamma ray effectively. Also, we developed ancillary equipment such as beam gate unit(BGU, vertical type) for the effective opening and closing of neutron beam. Shielding block was proved by suitable thickness as result that measure surface dosage using of detector and TLD. The acquired technique of design, fabrication and filling of ancillary equipment development can be applicable to the development of shield for the other neutron spectrometer in future.
1. 서 론
2. 차폐체 설계
3. 차폐체 제작
4. 중콘크리트 충전
5. ST3 차폐체 특성평가
6. 결 론
후 기
참 고 문 헌
