Cat-scratch disease (CSD) is a bacterial infection which primarily transmitted to humans through scratches, bites, or licks from infected cats. Even though CSD is generally a mild condition, atypical symptoms may appear and must be distinguished from other diseases. We encountered a 57-year-old woman who presented with intermittent pain in the right upper quadrant and epigastric part of the abdomen, and had lost 11 kg within a few months. She never had a cat and did not recall being scratched by a cat. Radiologic examinations strongly suggest a malignant bile duct tumor, thus liver resection was done. However, the result of histopathology was a CSD. At follow-up, the patient was stable and also showed improvement in her general condition. Hence, proper preoperative examinations of the patients are crucial in order to avoid excessive or inadequate treatment.

Background: Stroke patients experience a variety of physical problems due to neurological problems, including difficulties with trunk control. Trunk taping is used to improve gait in stroke patients. Objectives: To investigated the immediate effect of thoracic and abdominal elastic taping on gait parameters (the dynamic balance and gait speed) in stroke patients. Design: Quasi experimental study. Methods: A total of 24 study subjects were randomly assigned to the experimental group (thoracic and abdominal taping, 12 people), and the control group (sham taping, 12 people). All subjects had timed up and go (TUG) test and 10 meter walk test (10MWT) measured before and after taping. Results: After taping, the TUG test and 10MWT results were significantly reduced only in the study group (P<.05). The TUG test and 10MWT results of the study group were significantly decreased compared to the control group. Conclusion: The thoracic and abdominal taping was found to improve trunk control in stroke patients, thereby improving dynamic balance and walking speed.

Carbon nanofibers (CNFs) are promising materials for the construction of energy devices, particularly organic solar cells. In the electrospinning process, polyacrylonitrile (PAN) has been utilized to generate nanofibers, which is the simplest and most popular method of creating carbon nanofibers (CNFs) followed by carbonization. The CNFs are coated on stainless steel (SS) plates and involve an electropolymerization process. The prepared Cu, CNF, CNF–Cu, PANI, PANI–Cu, CNF–PANI, and CNF–PANI–Cu electrode materials’ electrical conductivity was evaluated using cyclic voltammetry (CV) technique in 1 M H2SO4 electrolyte solution. Compared to others, the CNF–PANI–Cu electrode has higher conductivity that range is 3.0 mA. Moreover, the PANI, CNF–PANI, and CNF–PANI–Cu are coated on FTO plates and characterized for their optical properties (absorbance, transmittance, and emission) and electrical properties (CV and Impedance) for organic solar cell application. The functional groups, and morphology-average roughness of the electrode materials found by FT–IR, XRD, XPS, SEM, and TGA exhibit a strong correlation with each other. Finally, the electrode materials that have been characterized serve to support and act as the nature of the hole transport for organic solar cells.

The conventional multi-scale modelling approach that predicts carbon nanotube (CNT) growth region in heterogeneous flame environment is computationally exhaustive. Thus, the present study is the first attempt to develop a zero-dimensional model based on existing multi-scale model where mixture fraction z and the stoichiometric mixture fraction zst are employed to correlate burner operating conditions and CNT growth region for diffusion flames. Baseline flame models for inverse and normal diffusion flames are first established with satisfactory validation of the flame temperature and growth region prediction at various operating conditions. Prior to developing the correlation, investigation on the effects of zst on CNT growth region is carried out for 17 flame conditions with zst of 0.05 to 0.31. The developed correlation indicates linear ( zlb=1.54zst +0.11) and quadratic ( zhb=zst(7-13zst )) models for the zlb and zhb corresponding to the low and high boundaries of mixture fraction, respectively, where both parameters dictate the range of CNT growth rate (GR) in the mixture fraction space. Based on the developed correlations, the CNT growth in mixture fraction space is optimum in the flame with medium-range zst conditions between 0.15 and 0.25. The stronger relationship between growth-region mixture-fraction (GRMF) and zst at the near field region close to the flame sheet compared to that of the far field region away from the flame sheet is due to the higher temperature gradient at the former region compared to that of the latter region. The developed models also reveal three distinct regions that are early expansion, optimum, and reduction of GRMF at varying zst.

Exploring cheap and efficient oxygen evolution reaction (OER) catalysts is extremely vital for the commercial application of advanced energy storage and conversion systems. Herein, a self-supporting Co3S4/ S-doped reduced graphene oxide ( Co3S4/S-rGO) film catalyst is successfully prepared by a blade coating coupled with high-temperature annealing strategy, and its morphology, structure and composition are measured and analyzed. It is substantiated that the as-synthesized Co3S4/ S-rGO film possesses unique self-supporting structure, and is composed of uniformly dispersed Co3S4 nanoparticles and highly conductive S-rGO, which benefit the exposure of catalytic sites and electron transfer. By reason of the synergistic effect of the two individual components, the self-supporting Co3S4/ S-rGO film catalyst displays outstanding catalytic performance towards OER. As a consequence, the Co3S4/ S-rGO film catalyst delivers an overpotential of 341 mV at 10 mA cm-2, and the current attenuation rate is only 2.6% after continuous operation for 4 h, verifying excellent catalytic activity and durability. Clearly, our results offers a good example for the construction of high-performance self-supporting carbon-based composite film catalysts for critical electrocatalytic reactions.

High-quality diamond films have attracted extensive attentions due to their excellent optical and electrical properties. However, several issues, such as random orientation, stress accumulation, and slow growth rate, severely limit its applications. In this paper, high-quality polycrystalline diamond films with highly ordered (100) orientation were prepared by microwave plasma chemical vapor deposition. The effects of growth parameters on the microstructure, quality and residual stress of diamond films were investigated. Experimental results indicate that relatively high temperature at low methane concentration will promote the formation of (100) oriented grains with a low compressive stress. Optimized growth parameters, a methane concentration of 2% along with a pressure of 250 Torr and temperature at 1050 ℃, were used to acquire high growth rate of 7.9 μm/h and narrow full width at half maximum of Raman peak of 5.5 cm− 1 revealing a high crystal quality. It demonstrates a promising method for rapid growth of high-quality polycrystalline diamond films with (100) orientation, which is vital for improving the diamond related applications at low cost.

Despite its profound impact on athletic performance, the significance of heart rate recovery (HRR) has been insufficiently addressed in the filed of sports science, particularly in the context of weightlifting characterized by brief and intense exertions involving heavy weights. Serving as a valuable indicator of autonomic nervous system and cardiovascular function, HRR assumes a pivotal role in weightlifting. This comprehensive review aims to delineate the specific demands for HRR in weightlifting, shedding light on the often overlooked cardiovascular considerations within training regimes focused on strength and power. The investigation scrutinizes the repercussions of HRR on weightlifting performance, seeking to elucidate how inadequate recovery intervals may result in physiological and psychological consequences. These consequences encompass a distorted perception of effort, disruption of coordination, compromised posture due to irregular breathing, and an overall decline in lifting capacity. The review systematically presents compelling evidence pertaining to heart rate response and recovery patterns during weightlifting, underscoring the critical importance of well-structured rest periods. Furthermore, the review delves into a comprehensive discussion of factors influencing HRR in weightlifting, encompassing variables such as sex, age, cardiovascular function, hydration, nutrition, and psychological aspects. Finally, a key emphasis is placed on the integration of effective HRR techniques into the training regimens of weightlifters, thereby ensuring sustained and optimized performance outcomes.

Laurencia is a red algal genus that was described by J.V. Lamouroux in 1813. The main characteristics of this genus have been known as the presence of four pericentral cells in an axial segment, secondary pit connections between adjacent epidermal cells, and the presence of corps en cerise in both epidermal and trichoblast cells. Additionally, the tetrasporangia are arranged in a parallel manner, and male branches feature terminal cup-shaped spermatangial pits. Currently, sixteen Korean Laurencia species have been reported based on their morphological characteristics. In this study, Laurencia decussata and L. pacifica have been added as new records to the Korean algal flora based on a combination of morphological observations and molecular analyses of rbcL sequences. Laurencia decussata has expanded from Australia and New Zealand to Korea, while the distribution of L. pacifica has expanded from USA and Mexico to Korea.

The initial development plans for the six reactor designs, soon after the release of Generation IV International Forum (GIF) TRM in 2002, were characterized by high ambition [1]. Specifically, the sodium-cooled fast reactor (SFR) and very-high temperature reactor (VHTR) gained significant attention and were expected to reach the validation stage by the 2020s, with commercial viability projected for the 2030s. However, these projections have been unrealized because of various factors. The development of reactor designs by the GIF was supposed to be influenced by events such as the 2008 global financial crisis, 2011 Fukushima accident [2, 3], discovery of extensive shale oil reserves in the United States, and overly ambitious technological targets. Consequently, the momentum for VHTR development reduced significantly. In this context, the aims of this study were to compare and analyze the development progress of the six Gen IV reactor designs over the past 20 years, based on the GIF roadmaps published in 2002 and 2014. The primary focus was to examine the prospects for the reactor designs in relation to spent nuclear fuel burning in conjunction with small modular reactor (SMR), including molten salt reactor (MSR), which is expected to have spent nuclear fuel management potential.

The aim of this study is to ensure the structural integrity of a canister to be used in a dry storage system currently being developed in Korea. Based on burnup and cooling periods, the canister is designed with 24 bundles of spent nuclear fuel stored inside it. It is a cylindrical structure with a height of 4,890 mm, an internal diameter of 1,708 mm, and an inner length of 4,590 mm. The canister lid is fixed with multiple seals and welds to maintain its confinement boundary to prevent the leakage of radioactive waste. The canister is evaluated under different loads that may be generated under normal, off-normal, and accident conditions, and combinations of these loads are compared against the allowable stress thresholds to assess its structural integrity in accordance with NUREG-2215. The evaluation result shows that the stress intensities applied on the canister under normal, off-normal, and accident conditions are below the allowable stress thresholds, thus confirming its structural integrity.

The objectives of this paper are: (1) to conduct the thermal analyses of the disposal cell using COMSOL Multiphysics; (2) to determine whether the design of the disposal cell satisfies the thermal design requirement; and (3) to evaluate the effect of design modifications on the temperature of the disposal cell. Specifically, the analysis incorporated a heterogeneous model of 236 fuel rod heat sources of spent nuclear fuel (SNF) to improve the reality of the modeling. In the reference case, the design, featuring 8 m between deposition holes and 30 m between deposition tunnels for 40 years of the SNF cooling time, did not meet the design requirement. For the first modified case, the designs with 9 m and 10 m between the deposition holes for the cooling time of 40 years and five spacings for 50 and 60 years were found to meet the requirement. For the second modified case, the designs with 35 m and 40 m between the deposition tunnels for 40 years, 25 m to 40 m for 50 years and five spacings for 60 years also met the requirement. This study contributes to the advancement of the thermal analysis technique of a disposal cell.

A transfer cask serves as the container for transporting and handling canisters loaded with spent nuclear fuels from light water reactors. This study focuses on a cylindrical transfer cask, standing at 5,300 mm with an external diameter of 2,170 mm, featuring impact limiters on the top and bottom sides. The base of the cask body has an openable/closable lid for loading canisters with storage modules. The transfer cask houses a canister containing spent nuclear fuels from lightweight reactors, serving as the confinement boundary while the cask itself lacks the confinement structure. The objective of this study was to conduct a structural analysis evaluation of the transfer cask, currently under development in Korea, ensuring its safety. This evaluation encompasses analyses of loads under normal, off-normal, and accident conditions, adhering to NUREG-2215. Structural integrity was assessed by comparing combined results for each load against stress limits. The results confirm that the transfer cask meets stress limits across normal, off-normal, and accident conditions, establishing its structural safety.

With South Korea increasingly focusing on nuclear energy, the management of spent nuclear fuel has attracted considerable attention in South Korea. This study established a novel procedure for selecting safety-relevant radionuclides for long-term safety assessments of a deep geological repository in South Korea. Statistical evaluations were performed to identify the design basis reference spent nuclear fuels and evaluate the source term for up to one million years. Safety-relevant radionuclides were determined based on the half-life criteria, the projected activities for the design basis reference spent nuclear fuel, and the annual limit of ingestion set by the Nuclear Safety and Security Commission Notification No. 2019-10 without considering their chemical and hydrogeological properties. The proposed process was used to select 56 radionuclides, comprising 27 fission and activation products and 29 actinide nuclides. This study explains first the determination of the design basis reference spent nuclear fuels, followed by a comprehensive discussion on the selection criteria and methodology for safety-relevant radionuclides.

충청남도농업기술원 화훼연구소에서 2021년에 개발된 ‘Pinky Lang’은 분홍색 홑꽃 타입의 스프레이 국화 신품종 이다. ‘Pinky Lang’은 2016년 10월에 육종 하우스 내에서 2016년에 순백색의 진한 녹심이 매력적인 품종으로써 선발 된 백색 홑꽃의 ‘Bodre’ 품종을 방임 수분하여 48개의 종자 를 채취했다. 채취한 종자를 2017년 파종한 뒤 우수개체로 선발되어 2017년부터 2020년까지 4년간 촉성, 억제, 자연개 화 작형별 주년생산성 검정을 수행하여 선발된 우수계통을 ‘SP17-425-01’이라 계통명을 부여하였다. 2020년 최종적으 로 우수한 계통으로써 평가 및 심의를 받은 뒤 ‘충남SP-68 호’로 명명하였고, 당해 년도 12월 직무육성 신품종 선정위원 회를 통과하여 품종명은 ‘Pinky Lang’으로 하였다. ‘Pinky Lang’은 고온기에 화색이 변하지 않고 녹심이 매우 진하며 줄 기가 튼튼한 품종이다. 여름철 흰녹병에도 강하여 고온기 수출 품종으로 적합하다고 판단되었다. ‘Pinky Lang’은 연중 3 작기 재배테스트에서 단일처리 후 개화소요일수는 자연개화 작형 52일, 촉성작형 49일, 억제작형 50일이었고, ‘Yes Luna’ 는 각각 51일, 52일, 52일로 전반적으로 개화소요일수가 짧 았다. ‘Pinky Lang’의 절화장과 줄기굵기는 각각 104.5cm, 4.71mm으로 ‘Yes Luna’가 109.5cm, 4.25mm인 것에 비 해 5cm정도 짧았고 줄기굵기는 0.46mm 더 굵었다. ‘Pinky Lang’의 꽃 크기는 5.6cm이고 ‘Yes Luna’는 6.8cm로 1.2cm 작았다. ‘Pinky Lang’의 한 줄기에 달리는 꽃의 수와 한 송이 당 꽃잎수는 각각 27.7개, 30.9매였고, ‘Yes Luna’ 는 각각 18.0개, 37.0매인 것으로 착화수는 9.7개 많았고 꽃 잎수는 6.1매 적었다. 여름철 재배테스트를 통해 확인해본 결 과 흰녹병 저항성이 높은 경향을 확인하지만, 1~10% 정도의 병반을 보여 완전저항성을 가지진 못하는 것으로 사료된다. 자연개화 작형에서 절화수명의 경우는 24.5일로 ‘Yes Luna’ 에 비해 2.1일 길었다. ‘Pinky Lang’은 과습한 경우 줄기가 연약해질 수 있기 때문에 생장억제제인 Daminozide를 처리 하여 줄기를 강건하게 하고 절화 품질의 균일도를 높여 고온 기 재배에 안정적인 생산이 가능하여 수출할 수 있다.

프리지아 ‘Ruby Star’는 농촌진흥청 국립원예특작과학원 에서 보라색 홑꽃 ‘Avilla’와 흰색 반겹꽃 ‘Medeo’를 2012년 교배하여 얻은 종자로부터 2006년 향이 좋고 개화기가 빠른 적색 홑꽃 계통을 선발하여 품종으로 개발되었다. 2014년부 터 2017년까지 생육·개화 특성검정 및 육성계통평가회의 기 호도 평가를 거쳐 선발되었으며 2018년 직무육성품종심의회 를 통해 ‘Ruby Star’로 명명되어 2021년 신품종으로 등록되 었다. ‘Ruby Star’는 빨간색(RHS, R45A) 홑꽃인 절화용 프리 지아 품종으로 개화소요일수가 118.0일이며 초장이 120.5cm 로 대조품종 ‘Rapid Red’보다 약 28.7cm 더 길다. 주당 분 지수는 5.8개로 대조품종에 비해 수확량이 많고 첫번째 분지 의 길이가 32.0cm, 두께가 3.02mm로 절화 특성이 우수하 다. ‘Ruby Star’의 소화수 및 소화폭은 각각 14.8개, 6.3cm 로 소화수가 많은 중대형화이다. 절화수명은 약 8.4일이며 주 당 자구수는 3.8개, 평균 자구중은 2.9g이다. 전자코를 이용 한 PCA 분석 결과 PC1과 PC2의 설명력은 각각 97.9%, 1.8%로 전체 변이의 99.7%를 반영했으며 ‘Ruby Star’와 대 조품종 ‘Rapid Red’는 서로 다른 향기 패턴을 보였다. Radar plot 결과 총 6개의 MOS 센서에서 ‘Ruby Star’의 센서 반응 이 ‘Rapid Red’보다 강하게 나타나 ‘Ruby Star’의 향기가 더 강한 것으로 나타났다.

농촌진흥청 국립원예특작과학원에서는 2021년 분홍색계 소 형 호접란 ‘Arihong’을 육성하였다. 2014년 밝은 분홍색 소형 품종 Phalaenopsis ‘Wedding’와 백색 바탕에 분홍빛을 가지는 소형종 P. ‘[{KT1398-1×(KM-6)-4}×Chiangbeauty-88]-23’ 를 모본과 부본으로 교배하였다. 2018년 실생 120개체 중 잎자세, 화색, 화형, 꽃대수 등 특성이 우수한 ‘14104-1’ 개체를 선발하여 기내 화경배양을 통해 증식하였다. 2018년부터 2021년에까지 1차, 2차특성검정을 통해 품종의 안정성과 균일성을 확인한 후 ‘Arihong’로 명명하였다. 이 품종은 백색(WG155B) 바탕에 중앙 에는 보라빛 분홍색(PVG80B)을 띄며, 진한 자주색(PG78A) 순판 을 가지는 것이 특징이다. 꽃대가 2대씩 발생하고 꽃대 길이는 평균 42.1cm 소형 분화로 적절한 크기를 가지고 있다. 평피기 형태의 꽃은 길이와 폭이 각각 5.1, 5.7cm이며, 분지가 발생하여 1개의 꽃대에 13.0개의 소화가 착생한다. ‘Arihong’의 잎은 수평으로 자라며 길이와 폭이 각각 13.0cm, 4.9cm였다. 또한 초세가 우수하고 생육 속도가 빨라 엽수 확보가 용이한 특성을 보였다.

경상남도농업기술원 화훼연구소에서 2021년 화색이 연황 색이며 화심이 녹색인 미니 절화용 거베라 품종 ‘크림쿠키’ (Cream Cookie)를 육성하였다. ‘크림쿠키’ 품종은 2014년 황색 미니 ‘Sun City’를 모본으로, 백색 미니 ‘Blandy’를 부 본으로 인공교배를 실시하여 육성된 품종이다. 2021년까지 생육 및 개화 특성검정과 기호도 조사를 실시하였으며 ‘크림 쿠키’의 생육 및 개화특성을 대조품종인 ‘Sun City’와 비교하 였다. ‘크림쿠키’는 연황색(RHS 4C) 꽃잎과 녹색 화심을 가진 반겹꽃 거베라 품종이다. 화폭이 7.1cm인 작은 꽃이며, 화경 장은 58.9cm였다. 화경 직경은 상부 0.4cm, 하부 0.7cm 였 다. 외부설상화의 길이는 2.8cm이며 폭은 0.8cm였다. 개화 소요일수는 65.7일로 ‘Sun City’에 비하여 18.8일 빨랐으며, 첫 개화시 엽수는 22.4매였다. 연간 주당 절화수량은 102.3 본으로 ‘Sun City’의 82.0본에 비하여 20.3본이 많았다. 절 화수명은 17.8일로 ‘Sun City’보다 4.1일 더 길었다. ‘크림쿠 키’는 화폭이 7.1cm의 미니 품종으로 연간 주당 100본 이상 절화 생산이 가능하다. 또한 수확 후 꽃 캡 씌우기, 꽃목 보강 등 추가적인 작업을 생략할 수 있어 생산비 절감이 가능하므 로 농가보급 확대가 기대된다.

Myanmar's soil is diverse in terms of climate and topography, including the central dry zone, hilly and upland areas, deltas, and coastal zones. As a result, crops such as rice, sesame, groundnuts, green gram, and maize are grown as major crops. Some soils are difficult to cultivate due to topographic constraints and permanent forests. Soil fertility was classified according to the physical and chemical characteristics. Based on these data, classification, and a soil survey, a soil map was made by the Land Use Division of Myanmar Agriculture Service. Myanmar's soil was classified into 24 soils according to the WRB classification by FAO/UNESCO, and soil maps were produced at the national level and for each of the 14 states and divisions. This study sought to contribute to efficient land use and sustainable agricultural development in Myanmar by understanding Myanmar's agricultural conditions and soil types.

이 연구는 1세대 스마트 온실의 재배환경 데이터와 장미 절 화의 품질 특성 데이터를 수집하고 그 요인들 간의 상관 관계 를 분석하여 절화수명 예측 및 최적 환경 조성의 기초 자료를 얻고자 수행되었다. 이를 위해, 토경재배(SC) 및 암면배지경 양액재배(RWH) 하우스 각 1개소를 선정하여 1년간 기온, 상 대습도(RH) 및 수증기압차(VPD), 일적산광량(DLI), 근권온도 등의 환경 데이터와 매월 말 수확된 장미 ‘Miss Holland’ 절 화의 품질 특성 데이터를 수집하였으며, 이 데이터와 절화수 명과의 상관관계를 분석하였다. 절화수명은 10월과 11월을 제외하고는 SC 하우스에서 RWH 하우스보다 더 길었다. 절 화수명과 환경 및 생육 특성 간의 상관관계 분석에서 SC 하우 스의 상관계수는 RWH 하우스보다 조금 더 높았으며, 절화수 명 예측을 위한 요소들도 두 하우스 간에 차이가 있었다. SC 하우스의 절화수명 Y=0.848X1+0.366X2-0.591X3+2.224X4- 0.171X5+0.47X6+0.321X7+9.836X8-110.219(X1-X8: 최고 RH, RH 일교차, DLI, pH, Hunter’s b value, EC, 절화 장, 잎 두께; R2=0.544)로 예측되었고, RWH 하우스의 절화수명 Y=-1.291X1+52.026X2-0.094X3+0.448X4-3.84X5+0.624X6 - 8.528X7+28.45(X1-X7: 경경, 야간 VPD, 최고 근권온도, 최 저 근권온도, 기온 일교차, RH 일교차, 최고 VPD; R2=0.5243) 로 예측되었다. 이 두 모델식으로부터 SC 하우스에서는 RH, EC 및 pH가, 그리고 RWH 하우스에서는 근권 온도가 절화수명에 더 큰 영향을 미친다는 것을 추론할 수 있다. 따라서 각 재배 방법에 따라 장미의 절화수명에 더 큰 영향을 미치는 환경적 요인을 효율적으로 관리할 필요가 있다.

Background: Water deer and sika deer, which breed in the wild environment, are known to have similar reproductive physiology mechanisms. Therefore, this study aimed to analyze the differences in uterine development between water deer and sika deer during estrus. Methods: MMPs and uterine development-related factors were analyzed and morphological differences were compared in the uterus of sika deer captured near Russia near Korea and water deer captured in the wild in Korea. Results: In terms of morphological differences in the uterus, the glands that form villus within the endometrium of the water deer were newly developed, and the formation of small glands was high, but the villus and glands of the sika deer were expanded, and the stroma zone in the myometrium was higher than that of the water deer. Development has increased. Additionally, the expression of PAPP-A and VEGF factors was increased in the endometrium of water deer than in sika deer, but the actions of MMPs were increased in sika deer. Conclusions: As a result of this study, there is a significant difference in the development of glands in the endometrium of water deer and sika deer during estrus, and it is believed that there is a significant difference in the development of the uterus due to the physiological effects of estrus between water deer and sika deer. Additionally, it is believed that there will be differences in the timing at which pregnancy can be decided.