검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 70

        61.
        2018.05 서비스 종료(열람 제한)
        The Stockholm Convention was adopted in Sweden in 2001 to protect human health and the environment, including Persistent Organic Pollutants Rotors, such as toxic and bioaccumulative. Currently, there are 28 kinds of materials. This prohibits and limits the production, use, and manufacture of the product. Korea is a party to the Convention and it is necessary to prepare management and treatment plan to cope with POPs trends. In the text, we have discussed HCBD materials. HCBD belongs to halogenated aliphatic unsaturated hydrocarbons. It is a toxic, organic mixture of bioaccumulation. A study on the treatment of waste containing HCBD substance, We decided to treat the waste containing HCBD thermally. So six samples were selected. Waste water treatment sludge, rubber plate, insecticide, tarpaulin, tire rubber, mixed sample. The tire rubber injected HCBD as a technical sample. HCBD analysis showed that 59.345 ~ 18,238.355 ug/kg was detected. For the thermal treatment, we analyzed element. As a result of thermogravimetric analysis, the weight change due to the decomposition of the material started at 200℃. The material decomposition was completed within 800℃. The thermal treatment was performed on a Lab-scale (1kg/hr). After exhaust gas analysis result, HCBD was detected at 0.01 to 0.09 ug/kg. The decomposition rate is estimated to be 99.848 ~ 99.999%. As a result of dioxin analysis in the exhaust gas, the highest concentration was found in the tarpaulins and the emission limit was exceeded. The concentrations of Cd, Pb, Cr, Cu, Ni and Zn in the residues were very low. Considering the decomposition rate of HCBD containing wastes, incineration treatment at 2 ton/hr or more is considered to be possible. And unintentional persistent organic pollutants such as dioxins in the exhaust gas. Therefore, it is considered safe to operate the incineration temperature at more than 1100℃.
        62.
        2018.05 서비스 종료(열람 제한)
        To achieve energy efficiency improvement is used to lower temperature for emission gas at catalyst inlet, or to reduce/stop using steam to reheat emission gas. Saved energy from this process can be used as power source in order to increase generation efficiency. Dry emission gas treatment, on the other hand, is the technology to increase generation efficiency by using highly efficient desalination materials including highly-responsive slaked lime and sodium type chemicals in order to comply with air pollution standards and reduce used steam volume for reheating emission gas. If dry emission gas is available, reheating is possible only with the temperature of 45℃ in order to expect generation efficiency by reducing steam volume for reheating. Retention energy of emission gas from combustion is calculated by emission gas multiplied by specific heat and temperature. In order to obtain more heat recovery from combustion emission gas, it is necessary to reduce not only exothermic loss from boiler facilities but emission calorie of emission gas coming out of boiler facilities. In order to reduce emission calorie of emission gas, it is efficient to realize temperature lowering for the emission gas temperature from the exit of heat recovery facility and reduce emission gas volume. When applying low temperature catalysts, the energy saving features from 0.03% to 2.52% (average 1.28%). When increasing the excess air ratio to 2.0, generation efficiency decreases by 0.41%. When the inlet temperature of the catalyst bed was changed from 210℃ to 180℃, greenhouse gas reduction results were 47.4, 94.8, 118.5, 142.2 thousand tons-CO2/y, CH4 was calculated to be 550.0, 1100.1, 1375.1, 1650.1 kg-CH4/y, and N2O was 275.0, 550.0, 687.6, 825.1 kg-N2O/y. In the case of high efficiency dry flue gas treatment, reduction of greenhouse gases by the change of temperature 120~160℃ and exhaust gas 5,000 ~ 6,500 ㎥/ton is possible with a minimum of 355,461 ton/y of CO2 and minimum 4,125 tons of CH4/y to a maximum of 6,325 ton/y and N2O to a minimum of 2,045 kg/y to a maximum of 3,135 kg/y.
        63.
        2009.03 KCI 등재 서비스 종료(열람 제한)
        "Early Valley", is an early maturing potato cultivar with high yield potential. "Early Valley" is a clonal selection resulting from the cross between 'Suncrisp' and 'A87109-10'. It has medium plant height and light green foliage. "Early Valley" has medium flowering habit and white flowers. Tubers are smooth, yellow skin, light yellow flesh, round tuber shape, medium eye depth, and medium dormancy and good keeping quality. It has stable yield under wide range of climatic conditions. "Early Valley" is resistance to late blight, but moderately susceptible to common scab and hollow heart. This cultivar is also resistant to potato rotting at harvesting during the raining season. "Early Valley" has high level of antioxidant activity (about three times higher) and vitamin C (higher by 40%) than the 'Superior'. This cultivar has high level of tuber uniformity and capable of yielding 36.56 t/ha which is 17.07% higher than the control potato cultivar 'Superior' under optimum agronomical practices.
        69.
        1983.07 KCI 등재 서비스 종료(열람 제한)
        수도 생육기간중 이상저온이 내습하였던 1980년에 동일위도상의 표고가 다른 두 개 지역, 수원(127˚ , 37˚ 20' 표고 37m)과 제천 (128.2˚ , N37˚ 10', 표고 280-300m)에다 Japonica 품종인 대골도, 진흥, 신002와 통일형품종 조생통일, 수원 287호(태백벼), wx 817-1-65-2-3(서울대 농대육성) 등을 4월 21일 파종 6월 1일 이앙하고 출수기, 간장, 수장 및 수량 관련형질들을 조사 비교 검토하였다. 1. 간장, 수장 및 1,000립중은 Japonica품종의 경우는 제천에서 통일형 품종의 경우는 수원에서 약간 작아지는 경향이었으나 유의적인 차이는 아니었다. 2. 수량구성요소중 주당 수수는 제천에서 현저히 증가되었는데 그 정도는 품종에 따라서 달랐으며, 임실율은 수원이 제천보다, Japonica 품종이 통일형 품종보다 높았는데 지역간 차이는 통일형 품종에서 현저하였다. 3. 지역에 따른 품종들의 품종군에 따라 달라 Japonica 품종들(대골도 제외)은 제천에서 월등히 높았으나 통일형 품종들은 제천에서 모두 감수되었다.
        1 2 3 4